High Performance Cable Tie, Multiple Color Pack Nylon 6.6, Length of 91mm (3.6 Inches) for Bundle Diameter up to 16mm (0.63 Inch), Width of 2.3mm (0.09 Inch), Tensile Strength Rating of 80 Newtons (18 Pounds), Operating Temperature of -40 Degrees Celsius (-40 F) to 85 Degrees Celsius (185 F)

Ground Lug

Copper One-Hole Lug, 45 Degree Bend Standard Barrel, Peep Hole, Max 35kV, Wire Size #1 AWG, 1/2 Inch Bolt Size, Silver Plated,Die Code 37, Die Color Code Green

High Speed Fuse Amp-Trap® A70Q 700VAC 650VDC 250A Bolted Blade

Male Terminal Apadpter, Size 1/2 Inch, Length 1.310 Inches, Outer Diameter 1.042 Inches, Material PVC, Color Gray, For use with Schedule 40 and 80 Conduit, Pack of 150

2 x 1-1/2 Inches Duct Spacer, High Impact Polystyrene Snap-Loc Base Spacer For Use With Nonmetallic Ducts

Square Body High-Speed Fuse Protistor® Size 70 aR 1200VDC IEC 200A With Striker L Brackets

These Premium Amp-trap French Cylindrical Semiconductor Fuses are an extension of the popular A70QS product line. They are solid-fill 14mm and 22mm fuses IEC rated 690VAC, 200kA Interrupting and 700VDC, 100kA interrupting at 10ms time constant. In addition, these fuses have an 890 VDC rating for capacitor discharge applications up to 2.5ms time constant. All ampere ratings are available with a striker. Applications include small inverter drives and UPS systems, with superior I²t for improved protection and performance. 690 Volts 63 amps.

Easy-Splice Heat Shrinkable End Cap 6 - 3/0 AWG These caps replace greases, tapes, epoxy, encapsulation, or dips. In most sizes, installation may be accomplished in less than one minute. Heat-shrinkable end caps provide for efficient and positive cable end sealing. Made of thermally stabilized polyolefin, the interior of the HSC is coated with a meltable sealant to assure a watertight seal, complete insulation, abrasion and corrosion resistance. Seals may be affected over lead, steel, aluminum, copper and all standard plastic and elastomeric insulating materials and conduit. HSC end sealing caps are qualified to ANSI C119.1-1986 and rated to ICEA electrical withstand test for 1,000 volts. HSC end sealing caps can be used as a live seal for cables carrying up to 1,000 volts. They can also be used as end seals for storing and pulling de-energized cable.

2 x 1-1/2 Inches Duct Spacer, High Impact Polystyrene Snap-Loc Intermediate Spacer For Use With Nonmetallic Ducts

HPS Open Style Control Transformer, 150VA 240x480V-120x240V 50/60Hz

4 inches Two way Snap-N-Stac High Impact Polystyrene Combo Spacer with 3 Inches Duct to Duct Spacing