Fuse supports, non-disconnecting, are used primarily in potential transformer circuits, or where there is some other disconnecting or isolating device in series with the fuse in the circuit. Disconnecting switch devices have the additional feature of serving to isolate the equipment they protect. It should be noted that disconnecting switches are not load-breaking devices, therefore, the circuit must be open prior to the fuse disconnection. Select either a fuse support or a disconnecting switch for each fuse. Fuse supports and disconnecting switches include live parts for both ends. Both fuse supports and fuse disconnect switches can be mounted vertically or horizontally. The type EK are used for indoor installations while the type EKO are used outdoors. 15500 Volts EKO-3D CGL series.

Clips and Live Parts for size D(3) diameter fuses, for ferrule mounting

SSR ZS 480V 50A 4.5-32 VDC LED

Adapter, Thread Converter, 1-1/4 Inch NPT Male Thread to M40 Female Thread, Suitable for Use in Zones 1, 2 , 21, and 22, Ex e and Ex d, UL1203, Nickel Plated Brass

MC 4P MP 30' 16/4 PVC

15/25kV 600 Series Deadbreak Reducing Tap Well. Length 5.37 inch. Width 3 inch not counting bracket. 600/200 Amps

PFA 10000 EMC Exhaust LT GY

Square Body High-Speed Fuse Protistor® Size NH 00 aR 690VAC IEC 400A With Striker DIN 80 Blades

Silver Line Series Power Supplies: Cover only for Class I1,I2 & I3

CONTROLLER

No matter the application, we’ve got you covered with a rugged, reliable and easy-to-install Spec-Setter safety switch. TUMBLER SWITCH - 2P

Powered by 115 VAC the ACS880 democase includes an ACS880 R2 drive mounted on a panel. Included is a motor with brake and an I/O board. Also included are an RAIO-01, RDIO-01 and RDCO-03 mounted internally to the drive. Fiber optic ports are provided for connection to DriveWindow or external options.