Showing 4009-4020 of 452,171 results

NSI Industries · Polaris · Connector Blocks
AL-R2-M4
Power Distribution Block (2) 500 MCM-4 AWG Primary (4) 4/0-6 AWG Secondary Power Distribution Blocks are made of high strength, high-conductivity aluminum alloy and are mounted in a high-strength glass-filled polyester base. Each block can stand alone or combine with other blocks to form a multi-block set.
Contact for Pricing

NSI Industries · NSI · Tools
CD6A
U-Type Compression Die - Pink 1/0 AWG Copper - 2 AWG Aluminum U-Shaped Compression Dies are for use with the NSi-12 Compression Tool and Other Tools. See Cross-Reference Chart below.
Contact for Pricing

NSI Industries · NSI · Tools
CD20
U-Type Compression Die - Pink 500 MCM Aluminum U-Shaped Compression Dies are for use with the NSi-12 Compression Tool and Other Tools. See Cross-Reference Chart below.
Contact for Pricing

NSI Industries · NSI · Tools
CCM-350
Manual 16" Cable Cutter - 350 MCM APPLICATIONS: Rugged and lightweight manual cable cutter for use with steel.
Contact for Pricing

NSI Industries · NSI · Security - Worklights
RS200
Rotatable Socket for Short Term Lighting allows you to re-position the socket to direct the light to where it is needed while helping to keep the cords tidy and out of the way. Rated for up to 200 Watts.
Contact for Pricing

NSI Industries · Polaris · Polaris Grey
ITG-1
The Polaris ITG-1 Grey Multi-Tap Single Side Entry Connector features 2 ports sized for 1 - 10 AWG Class B, C or D wires or 2 - 10 AWG Class K, M or I wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each port is specially designed for fine-stranded copper wires and pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing fine-stranded wire applications, including installation in cable trays, troughs, wire-ways, raceways, ducts and motor junction boxes.
Contact for Pricing
Minimum Qty: 6
Multiplier: 6
*Contact for lower quantities*

NSI Industries · Polaris · Polaris Black
ISR-600
The Polaris ISR-600 Multi-Tap In-Line Entry Connector features 2 ports sized for 600 MCM - 6 AWG wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.
Contact for Pricing
Minimum Qty: 2
Multiplier: 2
*Contact for lower quantities*

Contact for Pricing

NSI Industries · NSI · Tools
KA12-750
U-Type Crimping Die 750 MCM Aluminum - Yellow U-Shaped Crimping Dies are for use with the N1240 Crimping Tool and Other Tools.
Contact for Pricing

NSI Industries · Polaris · Copper Compression
L2048P
1 Hole Long Barrel Copper Compression Lug with Peep Hole 2/0 AWG - 1/2" Bolt Long Barrel Copper Compression Lugs are produced from high conductivity copper tubing. They are tin-plated to provide corrosion low contact resistance. Marked with die index and color coded for easy reference. Listed for 35KV maximum when properly installed and to cable manufacturer instructions. Temperature rating 90 degrees C. .
Contact for Pricing

Prestige Safety Glasses, Silver frame color, Smoke lens color, Uncoated lens, Polycarbonate lens material, Rubber Tipped Temple, 99.9 UV protection
Contact for Pricing

Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*