Showing 1765-1776 of 452,166 results

Contact for Pricing

NSI Industries · Polaris · Easy-Tap
IPCS4002
Insulation Piercing Connector 4/0 - 3 AWG Insulation piercing connectors are made for use with copper-copper, copper to aluminum and aluminum to aluminum applications. They are safe to use and are completely insulated, no need to strip wire. They can be installed on energized conductors with no contact at any point. No spacer required between connections. Exclusive "turbo spacer" keeps tap side open while main conductor is being tightened. Watertight and corrosion-free.
Contact for Pricing

Contact for Pricing

Contact for Pricing

MACHINERY DRIVE, Product Family: ACS850, Horsepower: 20 HP, Output Current: 28 A, Voltage: 480 VAC, Voltage Range: 380-500V, UL Type Open (IP20), Mounting: Cabinet-mounted (Side-by-Side) , Control Unit Cover with Drive Mount Control Panel, Ethernet IP/Modbus TCP/PROFInet IO RT Adapter, EMC/RFI Filter (2nd Envir), 3-Phase Input, 3-Phase Output, Frame: C, Product HxWxD: 22.3 in x 6.5 in x 11.8 in, Product Weight: 35 lbs
Contact for Pricing

ABB - Electrification · ABB
PLM3220R
PowerMark PRO convertible plug-on neutral load centers arrive as main lug but have the capability to have a main circuit breaker installed in the field. All ABB load centers are rated up to 60 degree/75 degree centigrade and suitable for use as service entrance equipment when installed in accordance with electrical code. The PLM3220R features space for 32 - 1" circuit breakers and 64 circuits, a 200-ampere bus rating, copper bus bars, and a gray NEMA 3R enclosure.
Contact for Pricing

Mencom Corporation · Mencom
MDC-4MFPX-20M
MDC, Cordset, 4 Pole, Male Straight / Female Straight, 20M, 18 awg, 4A, Yellow, PVC, Nickel Plated Brass
Contact for Pricing

CompleTech
CA450GP+
omnidirectional ground plane - Frequency range: 446-454 MHz - Gain: 6 dBi - Polarization: vertical - Connector: N-/TNC-female - VSWR: <1.5 - Radome: FG PU foam - Radiator material: copper - Mounting: 35-60 mm diameter pole - Wind load: 43 N
Contact for Pricing
Contact for Pricing

Contact for Pricing
Minimum Qty: 3
Multiplier: 3
*Contact for lower quantities*

Contact for Pricing

NSI Industries · Polaris · Polaris Black
IPL4-4
The Polaris IPL4-4 Multi-Tap Single Side Entry Connector features 4 ports sized for 4-14 AWG wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.
Contact for Pricing
Minimum Qty: 6
Multiplier: 6
*Contact for lower quantities*