Showing 2293-2304 of 452,166 results

NSI Industries · Polaris · Easy-Splice
RSK-500
Easy-Splice Direct Burial Splice Kit with Rubber Cover 2/0 AWG - 500 MCM Direct Burial Splice Kits are dual-rated for use with copper and aluminum cable. These kits consist of an in-line mechanical set screw connector pre-filled with oxide inhibitor and an EPDM rubber insulating cover to ensure a watertight seal. Rated 600 Volts APPLICATIONS: Street lights, motor connection, irrigation systems, HVAC, outdoor lighting, and over wire nuts for a secure seal.
Contact for Pricing

Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*

NSI Industries · Polaris · Polaris Grey
IPLG3/0-3B
The Polaris IPLG3/0-3B Grey Multi-Tap Single Side Entry Connector features 3 ports sized for 3/0 - 4 AWG Class B, C or D wires or 2/0 - 2 AWG Class K, M or I wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each port is specially designed for fine-stranded copper wires with a pre-installed tin plated copper ferule that collapses as the screw is tightened to form a strong connection with fine-stranded wires. Removable access plugs cover the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing fine-stranded wire applications, including installation in cable trays, troughs, wire-ways, raceways, ducts and motor junction boxes.
Contact for Pricing

NSI Industries · Polaris · Polaris EDGE
ISPB350-4
The Polaris ISPB350-4 Multi-Tap Direct Burial Single-Sided Entry Connector features 4 ports sized for 350 MCM - 12 AWG wires. The body is made from aluminum alloy wrapped in a layer of high-dielectric strength rubber insulation. Each single-sided port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the radial-tipped set screws. Rated for temporary submersion, wet or damp locations and direct burial applications. Installs with a hex key and torque wrench, without any tape or additional supplies. Meets or exceeds ANSI C119.1 specifications for use in wet or damp locations and designed for use in a wide range of temporary submersal or burial splicing applications.
Contact for Pricing
Minimum Qty: 2
Multiplier: 2
*Contact for lower quantities*

Contact for Pricing

ABB - Electrification · ABB · Jokab Safety
2TLA030054R0100
Emergency stop button for panel mounting, 22.5 mm holes, 2 NC contacts, status LED in button, terminal blocks.
Contact for Pricing

ABB - Electrification · ABB
ST202M-K2
ST202M-K2 Miniature Circuit Breaker ST202M-K2 Miniature Circuit Breaker K-Char., 10kA, 2A, 2P
Contact for Pricing

ABB - Electrification · GE
THF3325A1
No matter the application, we’ve got you covered with a rugged, reliable and easy-to-install Spec-Setter safety switch. SW FUSED HD 400A 3P 240V N1 A
Contact for Pricing

ABB - Electrification · GE
TLMQ1412RCU
ReliaHome T-Series convertible load centers arrive as main lug, but have the capability to have a main breaker installed. All ABB load centers are rated up to 60 degree/75 degree centrigrade and is suitable for use with service entrance equipment when installed in accordance with electrical code. The TLMQ1412RCU features space for 12, 1" breakers, a 125 A bus ampere rating, a copper bus, and an outdoor suitable enclosure.
Contact for Pricing

Micro-Change® Molded Junction Box with Molded Cable, Side Mount, 8 Ports, PNP, 5.0m Cable Length
Contact for Pricing

Micro-Change® (1/2"-20 UNF) Single-Ended Cordset, 2 Poles, Male (Straight) to Pigtail, 2-22 AWG PVC Cable, 1.83m Length
Contact for Pricing
Minimum Qty: 4
Multiplier: 1
*Contact for lower quantities*

Contact for Pricing
Minimum Qty: 25
Multiplier: 25
*Contact for lower quantities*