Showing 3649-3660 of 452,163 results

ABB - Installation Products · COLOR-KEYED
54158
Copper One-Hole Lug, Standard Barrel, Peep Hole, Max 35kV, Wire Size 2/0 AWG, 5/16 Inch Bolt Size, Tin Plated, Die Code 45, Die Color Code Black
Contact for Pricing
Minimum Qty: 10
Multiplier: 10
*Contact for lower quantities*

ABB - Installation Products · COLOR-KEYED
DX-1
Duct Seal Compound, 1 pound package. To Seal openings from air, dust or water around EMT or rigid conduit raceway. Not to be used for electrical insulation applications.
Contact for Pricing
Minimum Qty: 50
Multiplier: 50
*Contact for lower quantities*

ABB - Installation Products · COLOR-KEYED
31007-CK
Locktite Copper One-Hole Lug for Conductor Range #4 - #1 AWG or 50 - 75 NAVY. Length 1-5/8 inch, Width 5/8 inch, Pad Thickness 7/32 inch. Pad Length 13/16 inch. Bolt Size 1/4 inch, Height 1 inch.
Contact for Pricing

ABB - Installation Products · Color-Keyed
54168
Copper One-Hole Lug, Standard Barrel, Max 35kV, Wire Size 4/0 AWG, 5/16 Inch Bolt Size, Tin Plated, Die Code 54, Die Color Code Purple
Contact for Pricing
Minimum Qty: 10
Multiplier: 10
*Contact for lower quantities*

ABB - Installation Products · Carlon
UA9DF
Schedule 40 Elbow, Size 1 Inch, Bend Radius 24 Inches, Bend Angle 90 Degrees, Material PVC
Contact for Pricing

ABB - Installation Products · STEEL CITY
XC 274
Connector, Straight Squeeze-Type, Size 1-1/4 Inch, Clamping Range 1.48 Inch - 1.65 Inch, Length 1.91 Inch, Die Cast Zinc
Contact for Pricing
Minimum Qty: 10
Multiplier: 10
*Contact for lower quantities*

ABB - Installation Products · COLOR-KEYED
54908BE06PH
Copper One-Hole Lug, Long Barrel, Peep Hole, Max 35kV, Wire Size #4 AWG, 3/8 Inch Bolt Size, Tin Plated, Die Code 29, Die Color Code Gray
Contact for Pricing
Minimum Qty: 10
Multiplier: 10
*Contact for lower quantities*

Contact for Pricing

ABB - Electrification · ABB
2TLA050001R0100
Mechanical Safety interlock switch, rugged polyester housing and head, 12N holding force. 2NC+1NO (actuator inserted). 3x M20 conduit entries. Delivered with no key.
Contact for Pricing

ABB - Electrification · ABB
NFZ31E-23
NFZ contactor relays are used for switching auxiliary and control circuits. NFZ contactor relays include an electronic coil interface accepting a wide control voltage Uc min. ... Uc max. Only four coils cover control voltages between 24...250 V 50/60 Hz or 12...250 V DC. NF contactor relays can manage large control voltage variations. One coil can be used for different control voltages used worldwide without any coil change NFZ contactor relays allow direct control by PLC-output ⥠24 V DC 500 mA and obtain a reduced holding coil consumption. NFZ contactor relays withstand short voltage dips and voltage sags (SEMI F47-0706 compliance) between 24...250 V 50/60 Hz NFZ contactor relays have built-in surge protection and do not require additional surge suppressors - Poles: 4-pole contactor relays (mechanically-linked auxiliary contacts compliant with Annex L of IEC 60947-5-1 and including the "Mechanically Linked" symbol on the contactor relay side) - Control Circuit: AC or DC operated - Accessories: a wide range of Accessories is available.
Contact for Pricing

ABB - Electrification · ABB
CA4-11MRT
For clipping onto the right- and/or left-hand side of the contactors. The auxiliary contact blocks are equipped with screw type connecting terminals delivered open, protected against accidental direct contact and bear the corresponding function marking.
Contact for Pricing

Contact for Pricing