Accessories

    Office Equipment and Accessories and Supplies

    Drives, Servos, and Motors

    Power Generation and Distribution Machinery and Accessories

    Structures, Building, and Construction

    Enclosures, Fans, and Environmental Controls

    Information Technology Broadcasting and Telecommunications

    Electronic Components And Supplies

    Safety Equipment and Supplies

    Tools and General Machinery

    Manufacturing Components and Supplies

    Distribution and Conditioning Systems and Equipment and Components

    Material Handling and Conditioning and Storage Machinery and their Accessories and Supplies

    Electrical Systems and Lighting and Components and Accessories and Supplies

    Laboratory and Measuring and Observing and Testing Equipment

    Industrial Manufacturing and Processing Machinery and Accessories

    Miscellaneous

Showing 3421-3432 of 452,163 results

Mersen RF35 - Fuse RF - Class H - Fast-Acting 250VAC 35A Ferrule
Mersen

RF35

RF35


Fuse RF - Class H - Fast-Acting 250VAC 35A Ferrule

Contact for Pricing

Mersen GSF-V1 - Miniature fuse GSF-V - Time-Delay 250VAC 1A Size 5x20 Soldered connection
Mersen

GSF-V1

GSF-V1


Miniature fuse GSF-V - Time-Delay 250VAC 1A Size 5x20 Soldered connection

Contact for Pricing

Minimum Qty: 10

Multiplier: 10

*Contact for lower quantities*

Mersen MRF2.5 - Fast-Acting Microfuse 250 Volts 2.5 amps MRF series.
Mersen · Ferraz Shawmut

MRF2.5

782001284558


Fast-Acting Microfuse 250 Volts 2.5 amps MRF series.

Contact for Pricing

Minimum Qty: 5

Multiplier: 5

*Contact for lower quantities*

Mersen GGA-V6/10 - Miniature fuse GGA-V - Time-Delay 250VAC 0.6A Size 5x20 Soldered connection
Mersen

GGA-V6/10

GGA-V6/10


Miniature fuse GGA-V - Time-Delay 250VAC 0.6A Size 5x20 Soldered connection

Contact for Pricing

Minimum Qty: 10

Multiplier: 10

*Contact for lower quantities*

Federal Signal K2005328A-01 - LED Array, Unistat Quad-Color
Federal Signal

K2005328A-01

K2005328A-01


LED Array, Unistat Quad-Color

Contact for Pricing

Federal Signal K8595172A - Bracket, Mounting, Slotted
Federal Signal

K8595172A

K8595172A


Bracket, Mounting, Slotted

Contact for Pricing

Littelfuse LEBJJ - 1POLE INLINE FUSEHLDR W/COPPER SET SCR. The Littelfuse 600 V in-line watertight fuse holders are the ideal answer for all high humidity and corrosive environments where fuses are required. Available in both breakaway and non-breakaway, single and double pole versions, these fuse holders allow maximum flexibility for any application. Applications: Street, alley, and parking lot lighting. Security and perimeter lighting. Traffic signals. Outdoor illuminated signs. Sports lighting. Boat electrical circuits. Tractors and yard equipment. General outdoor circuit protection. Benefits: Safety-Permits individual fixture or device to be disconnected from circuit for servicing. Eliminates possibility of shock. Individual fixture fusing-Prevents loss of one fixture through accident, vandalism, or end of life from darkening the entire circuit. Simplifies maintenance- Being able to immediately identify the one faulted fixture eliminates testing the entire circuit, speeds repair and permits servicing the individual unit while the rest of the circuit is functioning. Reduces damage from fault-Can prevent faulted ballast or other failure from severely damaging fixture or device, reducing necessary repair or need of replacement. Features: Watertight-Internal O-ring provides watertight seal. Superior terminal seeds-Ultrasonically-welded terminals provide maximum strength and eliminate leaking at terminals. Break-Resistant- Fiberglass –reinforced polymer body resists damage from dropping or impact much better than phenolic look-alikes. Flexible terminations-Accommodates a wide range of stranded or solid copper conductors, with either crimp or screw terminals. One-pole and two-pole models- available to accommodate all system voltages up to 600v.
Littelfuse · LEB Series

LEBJJ

0LEB00JJX


1POLE INLINE FUSEHLDR W/COPPER SET SCR. The Littelfuse 600 V in-line watertight fuse holders are the ideal answer for all high humidity and corrosive environments where fuses are required. Available in both breakaway and non-breakaway, single and double pole versions, these fuse holders allow maximum flexibility for any application. Applications: Street, alley, and parking lot lighting. Security and perimeter lighting. Traffic signals. Outdoor illuminated signs. Sports lighting. Boat electrical circuits. Tractors and yard equipment. General outdoor circuit protection. Benefits: Safety-Permits individual fixture or device to be disconnected from circuit for servicing. Eliminates possibility of shock. Individual fixture fusing-Prevents loss of one fixture through accident, vandalism, or end of life from darkening the entire circuit. Simplifies maintenance- Being able to immediately identify the one faulted fixture eliminates testing the entire circuit, speeds repair and permits servicing the individual unit while the rest of the circuit is functioning. Reduces damage from fault-Can prevent faulted ballast or other failure from severely damaging fixture or device, reducing necessary repair or need of replacement. Features: Watertight-Internal O-ring provides watertight seal. Superior terminal seeds-Ultrasonically-welded terminals provide maximum strength and eliminate leaking at terminals. Break-Resistant- Fiberglass –reinforced polymer body resists damage from dropping or impact much better than phenolic look-alikes. Flexible terminations-Accommodates a wide range of stranded or solid copper conductors, with either crimp or screw terminals. One-pole and two-pole models- available to accommodate all system voltages up to 600v.

Contact for Pricing

Littelfuse SPD2-PV15-3P0 - Surge protection devices (SPDs) provide equipment protection from transient overvoltage events lasting micro-seconds. By limiting the overvoltage to the equipment during these events, costly damage and downtime can be mitigated. The surge protection devices for the 1+0 configuration are available for 60 V to 600 V nominal voltage sub-distribution board applications.
Littelfuse · SPD2 Series

SPD2-PV15-3P0

SPD2-PV15-3P0


Surge protection devices (SPDs) provide equipment protection from transient overvoltage events lasting micro-seconds. By limiting the overvoltage to the equipment during these events, costly damage and downtime can be mitigated. The surge protection devices for the 1+0 configuration are available for 60 V to 600 V nominal voltage sub-distribution board applications.

Contact for Pricing

Mersen STP230TNM - Surge-Trap® Pluggable SPD provides advanced overvoltage protection. Utilizing Mersen's patented TPMOV® design, which does not require fuses, a fuse holder or additional wiring in meeting the UL 1449 Third Edition standards thus providing substantial cost savings and reduced installation times. It also features a visual indicator, easy installation, fail-safe design, mechanical coding and remote monitoring. The Surge-Trap Pluggable SPD base is designed to be mounted on 35mm DIN-rail while plugs are easily replaceable upon failure without touching the base or the hassle of rewiring. 230 Volts TN system type .
Mersen · Surge-Trap

STP230TNM

782001410896


Surge-Trap® Pluggable SPD provides advanced overvoltage protection. Utilizing Mersen's patented TPMOV® design, which does not require fuses, a fuse holder or additional wiring in meeting the UL 1449 Third Edition standards thus providing substantial cost savings and reduced installation times. It also features a visual indicator, easy installation, fail-safe design, mechanical coding and remote monitoring. The Surge-Trap Pluggable SPD base is designed to be mounted on 35mm DIN-rail while plugs are easily replaceable upon failure without touching the base or the hassle of rewiring. 230 Volts TN system type .

Contact for Pricing

Minimum Qty: 3

Multiplier: 3

*Contact for lower quantities*

Mersen SP550U - Surge-Trap® Pluggable SPD provides advanced overvoltage protection. Utilizing Mersen's patented TPMOV® design, which does not require fuses, a fuse holder or additional wiring in meeting the UL 1449 Third Edition standards thus providing substantial cost savings and reduced installation times. It also features a visual indicator, easy installation, fail-safe design, mechanical coding and remote monitoring. The Surge-Trap Pluggable SPD base is designed to be mounted on 35mm DIN-rail while plugs are easily replaceable upon failure without touching the base or the hassle of rewiring. 550 Volts, UL Plug .
Mersen · Surge-Trap

SP550U

782001417406


Surge-Trap® Pluggable SPD provides advanced overvoltage protection. Utilizing Mersen's patented TPMOV® design, which does not require fuses, a fuse holder or additional wiring in meeting the UL 1449 Third Edition standards thus providing substantial cost savings and reduced installation times. It also features a visual indicator, easy installation, fail-safe design, mechanical coding and remote monitoring. The Surge-Trap Pluggable SPD base is designed to be mounted on 35mm DIN-rail while plugs are easily replaceable upon failure without touching the base or the hassle of rewiring. 550 Volts, UL Plug .

Contact for Pricing

Hammond Manufacturing 1585H15B1S - 48" VERTCIAL STRIP WITH SURGE
Hammond Manufacturing · Hammond Mfg. · 1585-6-7-8-S Series

1585H15B1S


48" VERTCIAL STRIP WITH SURGE

Contact for Pricing

Mersen HDF30 - Mersen’s wide range of handles for our Low Voltage Disconnect switches includes direct-mount, selector-style, and pistol-style in different lengths. Many of these handles have locking capabilities and are available in different colors and IP and NEMA ratings. We also have metal handles and special handles for flange-mounting. Direct mounted for 30 amp FDS series.
Mersen · Ferraz Shawmut

HDF30

3605340558883


Mersen’s wide range of handles for our Low Voltage Disconnect switches includes direct-mount, selector-style, and pistol-style in different lengths. Many of these handles have locking capabilities and are available in different colors and IP and NEMA ratings. We also have metal handles and special handles for flange-mounting. Direct mounted for 30 amp FDS series.

Contact for Pricing

Showing 3421-3432 of 452,163 results