Showing 1765-1776 of 452,166 results

ABB - Electrification · ABB
PLM3220R
PowerMark PRO convertible plug-on neutral load centers arrive as main lug but have the capability to have a main circuit breaker installed in the field. All ABB load centers are rated up to 60 degree/75 degree centigrade and suitable for use as service entrance equipment when installed in accordance with electrical code. The PLM3220R features space for 32 - 1" circuit breakers and 64 circuits, a 200-ampere bus rating, copper bus bars, and a gray NEMA 3R enclosure.
Contact for Pricing

MACHINERY DRIVE, Product Family: ACS850, Horsepower: 20 HP, Output Current: 28 A, Voltage: 480 VAC, Voltage Range: 380-500V, UL Type Open (IP20), Mounting: Cabinet-mounted (Side-by-Side) , Control Unit Cover with Drive Mount Control Panel, Ethernet IP/Modbus TCP/PROFInet IO RT Adapter, EMC/RFI Filter (2nd Envir), 3-Phase Input, 3-Phase Output, Frame: C, Product HxWxD: 22.3 in x 6.5 in x 11.8 in, Product Weight: 35 lbs
Contact for Pricing

Contact for Pricing

Contact for Pricing

Contact for Pricing
Minimum Qty: 3
Multiplier: 3
*Contact for lower quantities*
Contact for Pricing

Mencom Corporation · Mencom
MDC-4MFPX-20M
MDC, Cordset, 4 Pole, Male Straight / Female Straight, 20M, 18 awg, 4A, Yellow, PVC, Nickel Plated Brass
Contact for Pricing

CompleTech
CA450GP+
omnidirectional ground plane - Frequency range: 446-454 MHz - Gain: 6 dBi - Polarization: vertical - Connector: N-/TNC-female - VSWR: <1.5 - Radome: FG PU foam - Radiator material: copper - Mounting: 35-60 mm diameter pole - Wind load: 43 N
Contact for Pricing

Mini-Change® A-Size Single-Ended Cordset, 2 Poles, Female (90°) to Pigtail, 3.66m Length
Contact for Pricing
Minimum Qty: 4
Multiplier: 1
*Contact for lower quantities*

NSI Industries · Polaris · Polaris Black
IPL4-4
The Polaris IPL4-4 Multi-Tap Single Side Entry Connector features 4 ports sized for 4-14 AWG wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.
Contact for Pricing
Minimum Qty: 6
Multiplier: 6
*Contact for lower quantities*

Contact for Pricing

Contact for Pricing