Showing 5953-5964 of 452,163 results

NSI Industries · Polaris · Grounding
G-83
The NSI G-83 Ground Clamp for Rigid Conduit with Flexible Wire Strap, grips on pipes between 1/2" to 1" in diameter and features a 1" adapter hub connected to the clamp by a flexible copper strap. The wire strap and adapter both swing 360 degrees, making alignment simple. The copper strap provides additional flexibility during grounding and helps to protect the conduit system from results of vibrations in the water system. The zinc-plated steel screws and bronze clamp body are made of economical, high-quality metals that provide durable performance in a range of applications. Use this clamp to attach ground wires from rigid conduit to water pipes in indoor environments. UL Listed 467 for Grounding and Bonding. Stock products you can rely on—stock NSI.
Contact for Pricing

NSI Industries · Polaris · Grounding
GRC-34
We built the NSI GRC-34 Standard Duty Silicon Bronze Grounding Rod Clamp for demanding applications including direct burial, where the simple mechanical design and reliable clamping power of the screw outperform other options. The GRC-34 Grounding Rod Clamp fits grounding rod with a diameter of 3/4" and rebar with a diameter of 5/8" with room to tighten the clamping screw onto a range of 10 AWG solid to 1 AWG stranded conductors. GRC-family clamps with the -SB suffix have a body and screw made from silicon bronze for maximum strength, and the clamp is UL-listed for direct burial in earth or concrete. Stock products you can rely on—stock NSI.
Contact for Pricing

NSI Industries · NSI · Easy-Splice
HHK
Easy-Splice Heavy Wall Heat Shrink Kit Kits have been carefully constructed to include the four most common sizes of heavy wall heat shrink 6" lengths. Sealant included. The cases are made of extremely durable polypropylene and have heat sealed hinges. They provide the ultimate in organization and convenience and are clearly labeled on the inside lid for easy recognition. KIT CONTAINS: GENERAL USE RANGE Quantity SKU SEALABLE WIRE RANGE LENGTH RECOVERED EXPANDED MAX. CONDUCTOR O.D. MIN. SEAL LENGTH PER SIDE 9 HWHS-8-2-6 8-2 AWG 6" 0.170 0.550 0.410 2.000 3 HWHS-6-40-6 6-4/0 AWG 6" 0.250 0.860 0.690 2.000 3 HWHS-2-500-6 2 AWG- 500 MCM 6" 0.350 1.220 1.060 2.000 3 HWHS-20-750-6 2/0 AWG - 750 MCM 6" 0.510 1.730 1.300 2.000 MANUFACTURER:
Contact for Pricing

NSI Industries · Polaris · Compression
CAL40-48
Cast Aluminum Meter Socket Lug 4/0 AWG - 1/2 Bolt Made of dead-soft EC grade aluminum. 840 common dies- one die installs on all sizes. For aluminum or copper conductors. Pre-filled with oxide inhibitor. Installing dies (color red): .840, 18, 324, TX, 76, 11A, 249.
Contact for Pricing

NSI Industries · Polaris · Aluminum Compression
ASC4T
Dual Rated Aluminum Splice 4 AWG Dual Rated Aluminum Splices are a type of aluminum compression connector that is produced from high conductivity aluminum tubing. Center stop assures proper cable installation. Electro-tin plated for corrosion resistance. Color coded and marked with die index information. Pre-filled with oxide inhibitor and capped with color coded cap.
Contact for Pricing

NSI Industries · Polaris · Compression
ISE68
Pre-Insulated Service Entry Sleeves 3-4 Str - 4 Sol Pre-insulated service entry sleeves are used for fast and easy installation with standard tools. For combinations of aluminum-aluminum and aluminum-copper conductors. Meets the requirements of ANSI C119.4. Rated 600 Volts.
Contact for Pricing

NSI Industries · Polaris · Pin Terminals
PTS6
Solid Pin Terminal for Copper and Aluminum Conductors 6 AWG All-aluminum Pin Terminals is designed for termination of both aluminum and copper conductors. The solid pin is made of aluminum and is tin-plated and pre-filled with oxide inhibitor. A cover is provided for quick installation. Rated 600 Volts.
Contact for Pricing

ABB - Electrification · ABB
AF12-30-22-14
AF12 contactors are used for controlling power circuits up to 690 V AC and 220 V DC. They are mainly used for controlling 3-phase motors, non-inductive or slightly inductive loads. AF... contactors include an electronic coil interface accepting a wide control voltage Uc min. ... Uc max. Only four coils cover control voltages between 24...500 V 50/60 Hz or 20...500 V DC. AF contactors can manage large control voltage variations. One coil can be used for different control voltages used worldwide without any coil change. AF contactors have built-in surge protection and do not require additional surge suppressors. The AF... series 2-stack 3-pole contactors are of the block type design. - Main poles and auxiliary contact blocks: 3 main poles with a non-removable front-mounted 2 N.O. + 2 N.C. auxiliary contact block, side-mounted add-on auxiliary contact blocks (mechanically-linked auxiliary contacts compliant with Annex L of IEC 60947-5-1 including the "Mechanically Linked" symbol on the contactor side. N.C. mirror contacts compliant with Annex F of IEC 60947-4-1) - Control circuit: AC or DC operated - Accessories: a wide range of accessories is available. Note: 2-stack contactors available in some countries: please consult your ABB representative.
Contact for Pricing

Contact for Pricing

ABB - Electrification · ABB
KXT3F-3PC
XT3 Breaker Replacement Terminal Screw Kit (One kit required per breaker)
Contact for Pricing

Contact for Pricing

Contact for Pricing