Showing 2533-2544 of 452,171 results

Schlegel Elektrokontakt
RKUV28
Travel: 3 mm Release: twist right or leftProduct Dimension: � 28 mm (1.1 inches) Panel Cutout: � 16.2 mmBezel Color: Yellow Color Actuator: RedIllumination: No Labeling Option: No
Contact for Pricing

Schlegel Elektrokontakt
BZO
Switching Function: Momentary Travel: 3 mmContact Type: Faston Terminal 2.8 x 0.8 mm Contact Equipment: 1 x NCContact Material: AgNi Protection Class: II (protective insulation)Illumination: No Labeling Option: No
Contact for Pricing

Strobe Light, Hazardous Location, UL and cUL CID2, Pipe Mount, 240VAC, Red
Contact for Pricing

Radiant Wiring Module, Multifunctional, UL and cUL, 120-240VAC, Black
Contact for Pricing

Contact for Pricing

Super-Safeway® GFCI Multiple Outlet Box with Ground Continuity Monitor, Open Neutral Relay, (2) NEMA 5-15 Duplex with Flip Lids, 15.24m (50.0' ) Cord Length, 12/3 SOOW Cord, NEMA 5-15 Plug
Contact for Pricing

Contact for Pricing

DRIVE CFW500D24P0T4DB20G2 WEG specifications: Power supply 380-480 V; Input phases Three-phase; Configuration With options; Rated current (HD) 24 A; RFI filter Without filter; Enclosure IP20; Dynamic braking Standard with braking; Safety Stop Prepared to install the accessory CFW500-SFY2
Contact for Pricing

The RDCO-02 module includes the connectors for fiber optic DDCS channels CH0, CH1, CH2 and CH3. The usage of these channels is determined by the application but are normally assigned to the following: CH0 – overriding system (e.g. fieldbus adapter) - 5 MBd. CH1 – I/O extensions - 5MBd. CH2 – Master/Follower link - 10 MBd. CH3 – PC tools (such as DriveWare) - 10 MBd.
Contact for Pricing

Braking Resistor, 3.6 OHMS, 17640 WATTS, GCE24 Enclosure, 28W x 13D x 10H in, 82 lbs
Contact for Pricing

ABB - Installation Products · Ocal
EZD311-G
PVC Coated Sealing Fitting for Hazardous Locations, EZD Series, Pipe Size 1 Inch/27 Metric, Gray
Contact for Pricing

Mersen GPM-G panel mount fuse holders will accommodate 1/4"x1-1/4" fuses most are approved by U.L. and CSA. Cap and body material is bakelite or polycarbonate and function as a screw-in or bayonet style closure. Finger-grip or screwdriver slots are available. All holders are rated for up to 250 volts with amp ratings ranging from 3A to 15A. 250 Volts 10 Amps finger grip or screw cap 3/16 solder/QC terminal BULK PKG series.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*