Square Box Extension Ring, 21 Cubic Inches, 4 Inch Square x 1-1/2 Inch Deep, 1/2 Inch and 3/4 Inch Knockouts, Pre-Galvanized Steel, pack of 30, custom package

Square Box Surface Cover, 5 Cubic Inches, 4 Inch Square x 1/2 Inch Deep, Galvanized Steel, For use with Two Ground Fault Receptacles, pack of 10, for Retail

Non-Gangable Switch Box, 6.5 Cubic Inches, 3-3/4 Inch x 2 Inches x 1 Inch Deep. 2 Pry-Outs One End Knockouts, Pre-Galvanized Steel, Flat Bracket, For use with Conduit, pack of 6, for Retail

Gangable Switch Box, 14 Cubic Inches, 3 Inches Long x 2 Inches Wide x 2-3/4 Inches Deep, 1/2 Inch Knockouts, Pre-Galvanized Steel, Non-Metallic Cable Clamps (C-5) and CV Bracket Recessed 7/8 Inches, For use with Non-Metallic Sheathed Cable, pack of 25 for Retail

Flush Cover, Solid Aluminum with Black Powder Coated Finish, 1000 Pound Load Limit, For Flush Service Round Floor Box, 140 Cubic Inches, Opening Diameter 5-31/32 Inches, Base Diameter 8-1/8 Inches, Depth 6 Inches, 1 Inch and 1-1/2 Inch Conduit Hubs, Non-Metallic, Minimum Concrete Depth Flush 4 Inches Furniture Feed 3-1/2 Inches

Cable Tie, Heat Stabilized, Ultraviolet Resistant Black Polyamide (Nylon 6.6) for Temperatures up to 105 Degrees Celsius (221 F) for Indoor or Outdoor Applications, UL/EN/CSA62275 Type 21S Rated, Length of 360.68mm (14.2 Inches), Width of 4.8mm (0.19 Inch), Thickness of 1.27mm (0.05 Inch), Tensile Strength Rating of 222 Newtons (50 pounds), Bulk Pack

Copper Two-Way Splice Connector, Standard Barrel, Peep Hole, Max 35kV, Wire Size 350 kcmil, Plain Finish, Die Code 71, Die Color Code Red

T&B Method Traction Motor Disconnect Lug for Diesel-Electric Locomotives, Cable Size 325/24, Bolt Hole 5/16 Inch on 7/8 Inch Centers, Die Code 60

J-Line Accessory-Neoprene Cable Bushing .875 Inch

J-Line Accessories-Replacement For Female Interior, 60 Amp, 3 Pole 4 Wire, 600 Volts

Ground Clamp Repair kit for Safe Ground Static Clamp: item number SGC2

Bushing, Insulated Grounding, Trade Size 1/2 Inch, Grounding Lug Wire Size 14 AWG - 4 AWG, Zinc Die Cast, For use with Rigid/IMC Conduit.