Showing 8341-8352 of 452,171 results

NSI Industries · Polaris · Grounding
GLC-12RDB
NSI GLC-12RDB Heavy Duty Direct Burial Ground Clamps grip on pipes between 1/2" to 1" in diameter and are the ultimate ground clamps for securing just about any size ground wire in just about any application. The bronze body and pre-assembled 304 stainless steel screws are made of economical, high-quality metals that provide durable performance in a range of applications. The lay-in lug design of these clamps provides ultimate flexibility when securing large conductors and can accommodate wires in the range of 10 to 2 STR running in a perpendicular direction to the pipe or rod. Use this heavy-duty ground clamp to secure ground wire to copper water pipes, tubing, rebar and ground rods up to 1" in diameter. UL Listed for direct burial in both earth and concrete. UL Listed 467 for grounding and bonding. Stock products you can rely on—stock NSI.
Contact for Pricing

NSI Industries · Polaris · Grounding
GRC-3834
The NSI GRC-3834 Heavy Duty Silicon Bronze Range Taking Rod Clamp is the ultimate solution for flexible grounding to ground rods and rebar in direct burial applications. The heavy-duty silicon bronze construction enables the rod clamp to handle large ground wires up to 1/0 AWG. The special design of this clamp makes it compatible with 3/8", 1/2", 5/8" and 3/4" rebar and ground rods. Available with silicon bronze screws by adding suffix –SB, the GRC-3834 offers durable performance in tough environments. Ground rod clamp is UL Listed for direct burial in both earth and concrete. Stock products you can rely on—stock NSI.
Contact for Pricing

NSI Industries · NSI · Cable Ties
TFZ850
Tefzel Cable Ties, 7.50", 50Lb Min Min. Tensile STRength, UL 94V-O Approved, Plenum Rated, 100
Contact for Pricing

NSI Industries · Polaris · Easy-Splice
ROS-600
Easy-Splice Direct Burial Roll-On Splice Sleeve for 250 - 600 MCM Easy "roll-on" way to insulate and seal cable connections up to 1,000 volts. The gripping force of the EPDM elastomer combines with high performance sealant to form a water resistant, UV resistant insulating sleeve appropriate for direct burial application over in-line compression connectors. Ideal for use where gas or electric heating devices are not approved. RUS accepted as a secondary tap or splice cover. Each kit includes one Easy-Splice sleeve and sealant strips. Qualified to ANSI C119.1-1986. CSA certified to C22.2 No. 198.2. UL 486D listed, suitable for direct burial. APPLICATION: For use on standard poly or elastomeric-insulated cables. Insulates and seals in-line compression connectors or terminal lugs. Cable can be energized immediately.
Contact for Pricing

Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*

NSI Industries · Easy-Twist
WWC-N2-B
The Easy-Twist WWC-N2-B 500-Count Bag of N-Type Red Wire Connectors are designed for use on copper wires in the 22-6 AWG size range. They’re made of flame-retardant thermoplastic rated for a maximum temperature of 105˚ Celsius (221˚ Fahrenheit). The quick-grip square spring design grips in fewer twists and can dead-end a single wire, while the ergonomic swept-back wing design and ribbed texture makes them easy to twist. Their compact design is useful for applications in tight areas or anywhere else you need to connect wires.
Contact for Pricing
Minimum Qty: 500
Multiplier: 500
*Contact for lower quantities*

NSI Industries · Polaris · Polaris Black
IPLD600-12
The Polaris IPLD600-12 Multi-Tap Dual-Sided Entry Connector features 12 ports sized for 600 MCM - 6 AWG wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each dual-sided port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.
Contact for Pricing

NSI Industries · TORK · Mechanical Time Controls
8601
6 Minute Cycle Timer 20A 120V SPDT Indoor Metal Enclosure
Contact for Pricing

NSI Industries · TORK · In Wall Timers
A512H
The TORK A512H 12-Hour Spring-Wound In-Wall Twist Timer is designed to control a variety of indoor appliances and lights. Automate your home or office to save energy and money using the simple twist knob and reliable mechanical timekeeping. Features a time range of 30 minutes to 12 hours, plus it fits into a standard electrical box for in-wall mounting. Designed for indoor loads such as lights, whole house fans, air compressors, water heaters or motors.
Contact for Pricing

NSI Industries · TORK · Digital Time Controls
DG180A
The TORK DG180A 24-Hour/7-Day Multipurpose Digital Timer is designed for 20 amp / 120-277 volt loads and has a plastic enclosure for indoor/outdoor use. Automate your home or office to save energy and money, using the intuitive programming interface to set different on/off times each day or to cycle loads on various days. Designed for commercial applications in the home, office, factory, church or school, including indoor/outdoor lighting, heaters, air conditioners, water heaters, warning signs or traffic lights
Contact for Pricing

Contact for Pricing

NSI Industries · TORK · Digital Time Controls
DGUM100A
The TORK DGUM100A 24-Hour/7-Day Astronomic Digital Timer is designed for 20 amp / 120-277 volt loads and has a plastic enclosure for outdoor use. Automate your home or office to save energy and money using the intuitive programming interface and light sensitive activation to activate lights or signage when the ambient light level drops below a customizable threshold. Features holiday input and one momentary output channel with automatic voltage detection and a photo/override switch. Designed for commercial applications including signage, window lights, security or parking lot lights and warehouses.
Contact for Pricing