Accessories

    Office Equipment and Accessories and Supplies

    Drives, Servos, and Motors

    Power Generation and Distribution Machinery and Accessories

    Structures, Building, and Construction

    Enclosures, Fans, and Environmental Controls

    Information Technology Broadcasting and Telecommunications

    Electronic Components And Supplies

    Safety Equipment and Supplies

    Tools and General Machinery

    Manufacturing Components and Supplies

    Distribution and Conditioning Systems and Equipment and Components

    Material Handling and Conditioning and Storage Machinery and their Accessories and Supplies

    Electrical Systems and Lighting and Components and Accessories and Supplies

    Laboratory and Measuring and Observing and Testing Equipment

    Industrial Manufacturing and Processing Machinery and Accessories

    Miscellaneous

Showing 7765-7776 of 452,171 results

Mencom Corporation FFDC-4MPX-2M-SS - Foundation Fieldbus, Cordset, Shielded Cable, Not shielded to coupling nut, 4 Pole, M12 Male Straight, 2M, 18awg, 4A, Orange, PVC
Mencom Corporation · Mencom

FFDC-4MPX-2M-SS


Foundation Fieldbus, Cordset, Shielded Cable, Not shielded to coupling nut, 4 Pole, M12 Male Straight, 2M, 18awg, 4A, Orange, PVC

Contact for Pricing

Mencom Corporation EP-DB9-RJ45-32 - Panel Interface Connector with Continental European outlet, DB9, RJ45, in a 32 housing
Mencom Corporation · Mencom

EP-DB9-RJ45-32


Panel Interface Connector with Continental European outlet, DB9, RJ45, in a 32 housing

Contact for Pricing

Mencom Corporation GF-NR-32 - Panel Interface Connector with GFCI Duplex outlet, in a 32 housing
Mencom Corporation · Mencom

GF-NR-32


Panel Interface Connector with GFCI Duplex outlet, in a 32 housing

Contact for Pricing

Mencom Corporation GF-DB9-32 - Panel Interface Connector with GFCI Duplex outlet, and DB9, in a 32 housing
Mencom Corporation · Mencom

GF-DB9-32


Panel Interface Connector with GFCI Duplex outlet, and DB9, in a 32 housing

Contact for Pricing

Mencom Corporation GF-DB9-RJ45-BNC-32 - Panel Interface Connector with GFCI outlet, 9 pin D-sub, RJ45, BNC, in a 32 housing
Mencom Corporation · Mencom

GF-DB9-RJ45-BNC-32


Panel Interface Connector with GFCI outlet, 9 pin D-sub, RJ45, BNC, in a 32 housing

Contact for Pricing

Mencom Corporation GF-6M-R-32 - Panel Interface Connector with GFCI Duplex outlet, 6M, in a 32 housing
Mencom Corporation · Mencom

GF-6M-R-32


Panel Interface Connector with GFCI Duplex outlet, 6M, in a 32 housing

Contact for Pricing

Mencom Corporation GFDP1-RJ45-10R-32 - Panel Interface Connector with y, RJ45, and a 10amp reset, in a 32 housing
Mencom Corporation · Mencom

GFDP1-RJ45-10R-32


Panel Interface Connector with y, RJ45, and a 10amp reset, in a 32 housing

Contact for Pricing

Mencom Corporation IRCL-06NM-140-010 - Pre-wired Male Rectangular Receptacles, 6 Pole, Single Latch, 14 awg, 1M, Squich Spring
Mencom Corporation · Mencom

IRCL-06NM-140-010


Pre-wired Male Rectangular Receptacles, 6 Pole, Single Latch, 14 awg, 1M, Squich Spring

Contact for Pricing

Littelfuse LDFJ100.V - LDFJ100 is a Class J fuse with an ampere rating of 100.
Littelfuse · LDFJ Series

LDFJ100.V

LDFJ100.V


LDFJ100 is a Class J fuse with an ampere rating of 100.

Contact for Pricing

Littelfuse PLM9405 - The PLM Series is a 3-phase voltage monitor that continuously monitors each of the three phases. Monitors both delta and wye systems and no connection to neutral is required. The microcontroller circuit design protects against undervoltage, voltage unbalance, phase loss and phase reversal. Protection is assured when regenerated voltages are present. Operation: The output relay is energized and the LED glows green when all voltages are acceptable and the phase sequence is correct. Under and unbalanced voltages must be sensed for a continuous trip delay period before the relay de-energizes. Reset is automatic upon correction of the fault condition. The output relay will not energize if a fault condition is sensed as power is applied. The LED flashes red during the trip delay, then glows red when the output de-energizes. The LED flashes green/red if phase reversal is sensed. Field Adjustment: Set voltage adjustment knob at the desired operating line voltage for the equipment. This adjustment automatically sets the undervoltage trip point. Apply power. If the PLM fails to energize, (LED glows red) check wiring of all 3 phases, voltage, and phase sequence. If phase sequence is incorrect, the LED flashes green/red. To correct this, swap any two line voltage connections at the mounting socket. No further adjustment should be required.
Littelfuse · SSAC

PLM9405

PLM9405


The PLM Series is a 3-phase voltage monitor that continuously monitors each of the three phases. Monitors both delta and wye systems and no connection to neutral is required. The microcontroller circuit design protects against undervoltage, voltage unbalance, phase loss and phase reversal. Protection is assured when regenerated voltages are present. Operation: The output relay is energized and the LED glows green when all voltages are acceptable and the phase sequence is correct. Under and unbalanced voltages must be sensed for a continuous trip delay period before the relay de-energizes. Reset is automatic upon correction of the fault condition. The output relay will not energize if a fault condition is sensed as power is applied. The LED flashes red during the trip delay, then glows red when the output de-energizes. The LED flashes green/red if phase reversal is sensed. Field Adjustment: Set voltage adjustment knob at the desired operating line voltage for the equipment. This adjustment automatically sets the undervoltage trip point. Apply power. If the PLM fails to energize, (LED glows red) check wiring of all 3 phases, voltage, and phase sequence. If phase sequence is incorrect, the LED flashes green/red. To correct this, swap any two line voltage connections at the mounting socket. No further adjustment should be required.

Contact for Pricing

Littelfuse 201-575-AU - The 201A-AU is a 3-phase, auto-ranging, dual-range voltage monitor that protects 190-480VAC, 50/60Hz motors regardless of size. Has user adjustable 1-30 second trip delay, manual or 1-500 second restart delay, and 2-8% voltage unbalance trip point. The product also provides a user selectable nominal voltage setpoint and the voltage monitor automatically selects between the 200V and 400V range. The Model 201A-AU includes advanced single LED diagnostics, where five different light patterns distinguish between faults and normal conditions. This unique microcontroller-based voltage and phase-sensing device constantly monitors the 3-phase voltages to detect harmful power line conditions. When a harmful condition is detected, the 201A-AU's output relay is deactivated after a specified trip delay. The output relay reactivates after power line conditions return to acceptable levels.
Littelfuse · Symcom

201-575-AU

201575-AU


The 201A-AU is a 3-phase, auto-ranging, dual-range voltage monitor that protects 190-480VAC, 50/60Hz motors regardless of size. Has user adjustable 1-30 second trip delay, manual or 1-500 second restart delay, and 2-8% voltage unbalance trip point. The product also provides a user selectable nominal voltage setpoint and the voltage monitor automatically selects between the 200V and 400V range. The Model 201A-AU includes advanced single LED diagnostics, where five different light patterns distinguish between faults and normal conditions. This unique microcontroller-based voltage and phase-sensing device constantly monitors the 3-phase voltages to detect harmful power line conditions. When a harmful condition is detected, the 201A-AU's output relay is deactivated after a specified trip delay. The output relay reactivates after power line conditions return to acceptable levels.

Contact for Pricing

Littelfuse SPD2-PV11-3P0-R - Surge protection devices (SPDs) provide equipment protection from transient overvoltage events lasting micro-seconds. By limiting the overvoltage to the equipment during these events, costly damage and downtime can be mitigated. The surge protection devices for the 1+0 configuration are available for 60 V to 600 V nominal voltage sub-distribution board applications.
Littelfuse · SPD2 Series

SPD2-PV11-3P0-R

SPD2-PV11-3P0-R


Surge protection devices (SPDs) provide equipment protection from transient overvoltage events lasting micro-seconds. By limiting the overvoltage to the equipment during these events, costly damage and downtime can be mitigated. The surge protection devices for the 1+0 configuration are available for 60 V to 600 V nominal voltage sub-distribution board applications.

Contact for Pricing

Showing 7765-7776 of 452,171 results