Showing 3901-3912 of 452,166 results

NSI Industries · NSI · Security - Worklights
RS200
Rotatable Socket for Short Term Lighting allows you to re-position the socket to direct the light to where it is needed while helping to keep the cords tidy and out of the way. Rated for up to 200 Watts.
Contact for Pricing

NSI Industries · Polaris · Polaris Grey
ITG-1
The Polaris ITG-1 Grey Multi-Tap Single Side Entry Connector features 2 ports sized for 1 - 10 AWG Class B, C or D wires or 2 - 10 AWG Class K, M or I wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each port is specially designed for fine-stranded copper wires and pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing fine-stranded wire applications, including installation in cable trays, troughs, wire-ways, raceways, ducts and motor junction boxes.
Contact for Pricing
Minimum Qty: 6
Multiplier: 6
*Contact for lower quantities*

NSI Industries · Polaris · Polaris Black
ISR-600
The Polaris ISR-600 Multi-Tap In-Line Entry Connector features 2 ports sized for 600 MCM - 6 AWG wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.
Contact for Pricing
Minimum Qty: 2
Multiplier: 2
*Contact for lower quantities*

Contact for Pricing

NSI Industries · NSI · Tools
KA12-750
U-Type Crimping Die 750 MCM Aluminum - Yellow U-Shaped Crimping Dies are for use with the N1240 Crimping Tool and Other Tools.
Contact for Pricing

NSI Industries · Polaris · Copper Compression
L2048P
1 Hole Long Barrel Copper Compression Lug with Peep Hole 2/0 AWG - 1/2" Bolt Long Barrel Copper Compression Lugs are produced from high conductivity copper tubing. They are tin-plated to provide corrosion low contact resistance. Marked with die index and color coded for easy reference. Listed for 35KV maximum when properly installed and to cable manufacturer instructions. Temperature rating 90 degrees C. .
Contact for Pricing

Bolt, 1/2-13 in. size, 2-1/4 in. length, Hex head, Zinc, 50 per pack
Contact for Pricing
Minimum Qty: 50
Multiplier: 50
*Contact for lower quantities*

Self-Drilling & Tapping Drywall Screw, Steel material, #8 Size, 1 in. length, Fine thread type, Wafer head, Zinc finish, Phillips drive, Self Drill Point, 1000 per pack, Jar, including a(n) Power Bit. For use with 12 Gauge Steel Stud.
Contact for Pricing
Minimum Qty: 1000
Multiplier: 1000
*Contact for lower quantities*

Two Nail Staple, #14-2 or #12-2 AWG cable size, Non Metallic Cable type, 1/2 in. staple size, White, Plastic insulation, 100 per pack
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*

Hands Free Swivel Fixture, 2 hole(s), 4 in. Square, Round Electrical Boxes, 3/4 in. Pipe, Includes Reduced Bushing for 1/2 in. Pipe fits, 50 lb. load capacity, Single Electrician installation, 1 per pack, Rugged Hinge construction. For use with 4 in. Round Box, 3/4 in. Pipe, 1/2 in. Pipe.
Contact for Pricing

Eye Bolt with Hex Nut, 3/8-16 in. size, 5 in. length, 3 in. thread length, 1 in. eye diameter, Steel, Zinc Chromate finish, 25 per pack
Contact for Pricing
Minimum Qty: 25
Multiplier: 25
*Contact for lower quantities*

Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*