Accessories

    Office Equipment and Accessories and Supplies

    Drives, Servos, and Motors

    Power Generation and Distribution Machinery and Accessories

    Structures, Building, and Construction

    Enclosures, Fans, and Environmental Controls

    Information Technology Broadcasting and Telecommunications

    Electronic Components And Supplies

    Safety Equipment and Supplies

    Tools and General Machinery

    Manufacturing Components and Supplies

    Distribution and Conditioning Systems and Equipment and Components

    Material Handling and Conditioning and Storage Machinery and their Accessories and Supplies

    Electrical Systems and Lighting and Components and Accessories and Supplies

    Laboratory and Measuring and Observing and Testing Equipment

    Industrial Manufacturing and Processing Machinery and Accessories

    Miscellaneous

Showing 3625-3636 of 452,166 results

ABB - Electrification NFZ31E-23 - NFZ contactor relays are used for switching auxiliary and control circuits. NFZ contactor relays include an electronic coil interface accepting a wide control voltage Uc min. ... Uc max. Only four coils cover control voltages between 24...250 V 50/60 Hz or 12...250 V DC. NF contactor relays can manage large control voltage variations. One coil can be used for different control voltages used worldwide without any coil change NFZ contactor relays allow direct control by PLC-output ⥠24 V DC 500 mA and obtain a reduced holding coil consumption. NFZ contactor relays withstand short voltage dips and voltage sags (SEMI F47-0706 compliance) between 24...250 V 50/60 Hz NFZ contactor relays have built-in surge protection and do not require additional surge suppressors - Poles: 4-pole contactor relays (mechanically-linked auxiliary contacts compliant with Annex L of IEC 60947-5-1 and including the "Mechanically Linked" symbol on the contactor relay side) - Control Circuit: AC or DC operated - Accessories: a wide range of Accessories is available.
ABB - Electrification · ABB

NFZ31E-23


NFZ contactor relays are used for switching auxiliary and control circuits. NFZ contactor relays include an electronic coil interface accepting a wide control voltage Uc min. ... Uc max. Only four coils cover control voltages between 24...250 V 50/60 Hz or 12...250 V DC. NF contactor relays can manage large control voltage variations. One coil can be used for different control voltages used worldwide without any coil change NFZ contactor relays allow direct control by PLC-output ⥠24 V DC 500 mA and obtain a reduced holding coil consumption. NFZ contactor relays withstand short voltage dips and voltage sags (SEMI F47-0706 compliance) between 24...250 V 50/60 Hz NFZ contactor relays have built-in surge protection and do not require additional surge suppressors - Poles: 4-pole contactor relays (mechanically-linked auxiliary contacts compliant with Annex L of IEC 60947-5-1 and including the "Mechanically Linked" symbol on the contactor relay side) - Control Circuit: AC or DC operated - Accessories: a wide range of Accessories is available.

Contact for Pricing

NSI Industries HSD12E - High-Speed Twist Drill, Bright finish, 4 in. overall length, 1/4 in. fractional size, 118 DEG tip angle
NSI Industries · Metallics

HSD12E

39812


High-Speed Twist Drill, Bright finish, 4 in. overall length, 1/4 in. fractional size, 118 DEG tip angle

Contact for Pricing

NSI Industries JTMP102 - 1/4-20 x 1-1/4 Truss Hd Phillips Machine Screw Zinc
NSI Industries · Metallics

JTMP102

63802


1/4-20 x 1-1/4 Truss Hd Phillips Machine Screw Zinc

Contact for Pricing

Minimum Qty: 100

Multiplier: 100

*Contact for lower quantities*

NSI Industries MHOK24C - Knock-On Beam Clamp, 1/8 -1/4 in. flange range, 1 hole, Black, Conduit to Drop Flange clip type, 1/4 in. mounting holes, Spring Steel, Ceiling mounting, For use with Jack Chain Ceiling Wire or 1/4 in. Bolt, 100 per pack
NSI Industries · Metallics

MHOK24C

81923


Knock-On Beam Clamp, 1/8 -1/4 in. flange range, 1 hole, Black, Conduit to Drop Flange clip type, 1/4 in. mounting holes, Spring Steel, Ceiling mounting, For use with Jack Chain Ceiling Wire or 1/4 in. Bolt, 100 per pack

Contact for Pricing

Minimum Qty: 100

Multiplier: 100

*Contact for lower quantities*

NSI Industries DT2ER - 2 x 1000' Detectable Red - Underground Electric Line Below
NSI Industries · Metallics

DT2ER

81095


2 x 1000' Detectable Red - Underground Electric Line Below

Contact for Pricing

ABB - Electrification CA4-11MRT - For clipping onto the right- and/or left-hand side of the contactors. The auxiliary contact blocks are equipped with screw type connecting terminals delivered open, protected against accidental direct contact and bear the corresponding function marking.
ABB - Electrification · ABB

CA4-11MRT


For clipping onto the right- and/or left-hand side of the contactors. The auxiliary contact blocks are equipped with screw type connecting terminals delivered open, protected against accidental direct contact and bear the corresponding function marking.

Contact for Pricing

ABB - Electrification OHBS2 - OHBS2 HANDLE
ABB - Electrification · ABB

OHBS2


OHBS2 HANDLE

Contact for Pricing

ABB - Electrification A2N200TW - A2N 250 TMF 200-2000 3P F F UL
ABB - Electrification · ABB

A2N200TW


A2N 250 TMF 200-2000 3P F F UL

Contact for Pricing

ABB - Electrification A1N100TW-2 - A1N 100 TMF 100-1000 2P F F UL
ABB - Electrification · ABB

A1N100TW-2


A1N 100 TMF 100-1000 2P F F UL

Contact for Pricing

ABB - Electrification KXT6CUAL2X500K-3PC - FRONT TERMINALS FOR CABLES IN COPPER-ALUMINIUM 2x 250-500 kcmil 3pcs XT6 UL/CSA
ABB - Electrification · ABB

KXT6CUAL2X500K-3PC


FRONT TERMINALS FOR CABLES IN COPPER-ALUMINIUM 2x 250-500 kcmil 3pcs XT6 UL/CSA

Contact for Pricing

Panduit SLCT-WH - The SLCT-WH Self-Laminating Cable Marker Holder Label is a durable tag designed to mark a wide range of cables and cable bundles. It can be used with printer generated labels or hand-written. A clear overlaminate protects the legend. The Marker Holder can be applied as a wrap-around marker or flag marker. Self-Laminating Vinyl. 3" x 1.31" (76.20 mm x 33.30 mm). Color White. 25 tags per package.
Panduit

SLCT-WH


The SLCT-WH Self-Laminating Cable Marker Holder Label is a durable tag designed to mark a wide range of cables and cable bundles. It can be used with printer generated labels or hand-written. A clear overlaminate protects the legend. The Marker Holder can be applied as a wrap-around marker or flag marker. Self-Laminating Vinyl. 3" x 1.31" (76.20 mm x 33.30 mm). Color White. 25 tags per package.

Contact for Pricing

Minimum Qty: 4

Multiplier: 1

*Contact for lower quantities*

SolaHD EE5H15 - SolaHD, Ventilated Distribution Transformer, DOE 10 Cfr P431 - DOE 2016 Compliant, Ul Listed E25872, 15 KVA, Primary Voltage 480 V, Secondary Voltage 240 V, 60 HZ, 3 Phase, Number Of Taps 7, Temperature Rating 150 Degrees C, Connection Delta-Delta W/ Ct, Winding Aluminium, Enclosure Nema Type 1
SolaHD

EE5H15


SolaHD, Ventilated Distribution Transformer, DOE 10 Cfr P431 - DOE 2016 Compliant, Ul Listed E25872, 15 KVA, Primary Voltage 480 V, Secondary Voltage 240 V, 60 HZ, 3 Phase, Number Of Taps 7, Temperature Rating 150 Degrees C, Connection Delta-Delta W/ Ct, Winding Aluminium, Enclosure Nema Type 1

Contact for Pricing

Showing 3625-3636 of 452,166 results