Showing 8773-8784 of 452,163 results

Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*

NSI Industries · NSI · Wire Management
ULTD-643
Caution Buried Communication Line Below - Detectable Tape - 6" x 1000' Consists of a minimum 5 mil overall thickness with no less than a 35 gauge solid aluminum foil core, which allows for easy detection of underground utilities. Specially formulated to resist degradation by elements normally encountered in soil. All printing is encased to avoid ink rub-off with environmentally safe ink.
Contact for Pricing

NSI Industries · Polaris · Connector Blocks
AL-R2-H12
Power Distribution Block (2) 500 MCM-4 AWG Primary (12) 4-14 AWG Secondary Power Distribution Blocks are made of high strength, high-conductivity aluminum alloy and are mounted in a high-strength glass-filled polyester base. Each block can stand alone or combine with other blocks to form a multi-block set.
Contact for Pricing

NSI Industries · NSI · Wire Management
VM-C-48
Voltage Marker Card Danger High Voltage, 12ea. .5x2.25"
Contact for Pricing

Contact for Pricing

NSI Industries · Polaris · Connector Blocks
CL
Large Power Distribution Block Cover Large power distribution block covers are see through, clear acrylic covers to permit visual inspection. Snaps easily into place. For use with connector blocks series with prefix AL.
Contact for Pricing

NSI Industries · NSI · Tools
CD2
U-Type Compression Die - Blue 6 AWG Copper - 8 AWG Aluminum U-Shaped Compression Dies are for use with the NSi-12 Compression Tool and Other Tools. See Cross-Reference Chart below.
Contact for Pricing

Contact for Pricing
Minimum Qty: 50
Multiplier: 50
*Contact for lower quantities*

NSI Industries · Polaris · Polaris Black
IPL750-4
POLARIS 750 Multi-Tap Black Insulated Connector with 4 Conductors and One Side Wire Entry. Rated for 750-250 MCM, 90 degree C and 600V.
Contact for Pricing
Minimum Qty: 2
Multiplier: 2
*Contact for lower quantities*

NSI Industries · NSI · Switches
79200MS
NSI's NO/NC SPDT Magnetic Reed Switch is a Single-Pole, Double-Throw switch. It draws no power while in the closed position, but when the magnet is applied, the common reed swings from the normally closed state to the normally open contact. When the magnet is removed, the reed contact moves back to the normally closed contact.
Contact for Pricing

NSI Industries · Polaris · Polaris Black
IPLD500-6
The Polaris IPLD500-6 Multi-Tap Dual-Sided Entry Connector features 6 ports sized for 500 MCM - 4 AWG wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each dual-sided port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.
Contact for Pricing
Minimum Qty: 2
Multiplier: 2
*Contact for lower quantities*

NSI Industries · Polaris · Polaris Black
ISR-1/0
The Polaris ISR-1/0 Multi-Tap In-Line Entry Connector features 2 ports sized for 1/0 - 14 AWG wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.
Contact for Pricing
Minimum Qty: 4
Multiplier: 4
*Contact for lower quantities*