Easy-Splice Heat Shrinkable End Cap These caps replace greases, tapes, epoxy, encapsulation, or dips. In most sizes, installation may be accomplished in less than one minute. Heat-shrinkable end caps provide for efficient and positive cable end sealing. Made of thermally stabilized polyolefin, the interior of the HSC is coated with a meltable sealant to assure a watertight seal, complete insulation, abrasion and corrosion resistance. Seals may be affected over lead, steel, aluminum, copper and all standard plastic and elastomeric insulating materials and conduit. HSC end sealing caps are qualified to ANSI C119.1-1986 and rated to ICEA electrical withstand test for 1,000 volts. HSC end sealing caps can be used as a live seal for cables carrying up to 1,000 volts. They can also be used as end seals for storing and pulling de-energized cable.

High Performance Cable Tie, Multiple Color Pack Nylon 6.6, Length of 140mm (5.5 Inches) for Bundle Diameter up to 35mm (1.38 Inches), Width of 3.6mm (0.14 Inch), Tensile Strength Rating of 178 Newtons (40 Pounds), Operating Temperature of -40 Degrees Celsius (-40 F) to 85 Degrees Celsius (185 F)

1/2 Inch, Straight, One-Piece Liquidtight Non-Metallic Fitting, CSA, UL E32447, Temperatures up to 60 Degrees C, PVC, Grey

High Performance Cable Tie, Multiple Color Pack Nylon 6.6, Length of 91mm (3.6 Inches) for Bundle Diameter up to 16mm (0.63 Inch), Width of 2.3mm (0.09 Inch), Tensile Strength Rating of 80 Newtons (18 Pounds), Operating Temperature of -40 Degrees Celsius (-40 F) to 85 Degrees Celsius (185 F)

Wall Plate Screw, #6-32 size, Oval head, 2 in. length, White Switch Plate head color, Slotted drive type, Steel, Zinc Plated finish, 100 per pack

Ground Lug

The radius intersection is sold in packages of two brackets, allowing you to build one (1) tee-intersection or two (2) 90-degree bends in the wire basket. It is intended to be used for 4" high basket. It comes in black powder-coated finish.

Copper One-Hole Lug, 45 Degree Bend Standard Barrel, Peep Hole, Max 35kV, Wire Size #1 AWG, 1/2 Inch Bolt Size, Silver Plated,Die Code 37, Die Color Code Green

High Speed Fuse Amp-Trap® A70Q 700VAC 650VDC 250A Bolted Blade

Male Terminal Apadpter, Size 1/2 Inch, Length 1.310 Inches, Outer Diameter 1.042 Inches, Material PVC, Color Gray, For use with Schedule 40 and 80 Conduit, Pack of 150

Copper One-Hole Lug, Standard Barrel - Bottom Stacking, Peep Hole, Max 35kV, Wire Size 350 Flex, 3/8 Inch Bolt Size, Tin Plated, Die Code 76, Die Color Code Blue

2 x 1-1/2 Inches Duct Spacer, High Impact Polystyrene Snap-Loc Base Spacer For Use With Nonmetallic Ducts