Showing 4513-4524 of 452,163 results

Contact for Pricing

Contact for Pricing

Super-Safeway™ Rubber Hand Lamp with 100W Open End Reflector Guard with Switch and Receptacle
Contact for Pricing

Watertite® Wet Location Incandescent Hand Lamp, 100W with TEFLON® Globe, Cord Type 16/2 SOOW, 15.24m (50.0' ) Cord Length
Contact for Pricing

Watertite® Wet Location Incandescent Hand Lamp, 100W for use with Low Voltage Workstation with Screw Release TEFLON Guard, Cord Type 14/2 SOOW, 15.24m (50.0' ) Cord Length
Contact for Pricing

Haztex® Incandescent Hazardous and Wet Location Hand Lamp, 100W, 16/3 SOOW Cord Type, Cord Length 7.62m (25.0' )
Contact for Pricing

The 50R single-phase voltage monitor has a voltage-sensing circuit which constantly monitors the single-phase power for a low voltage condition. Single-phase motors on fans, compressors, air conditioners, heat pumps, well pumps, sump pumps and small conveyor motors are all applicable to the Model 50R. When a harmful condition is detected, the output relay is deactivated after a specified trip delay. The output relay reactivates after power line conditions return to an acceptable level and a specified amount of time has elapsed (restart delay). The trip delay prevents nuisance tripping due to rapidly fluctuating power line conditions.
Contact for Pricing

Contact for Pricing
Minimum Qty: 10
Multiplier: 10
*Contact for lower quantities*

Amp-Trap 2000 time-delay AJT fuses provide IEC Type "2" (No Damage) protection to main, feeder, and branch-circuits, for all types of loads - yet, they require only half the mounting space needed for 600V UL Class RK fuses. Time-delay characteristics handle motor in-rush currents without nuisance trips. Its current-limiting ability and wide range of ratings provide excellent overcurrent protection for all your applications. An optional mechanical blown fuse indicator and Microswitch is available on blade-type (70 to 600A) fuses for visual and/or remote blown fuse indication. 600 Volts 1 amps .
Contact for Pricing
Minimum Qty: 19
Multiplier: 10
*Contact for lower quantities*

Mersen GPM-G panel mount fuse holders will accommodate 1/4"x1-1/4" fuses most are approved by U.L. and CSA. Cap and body material is bakelite or polycarbonate and function as a screw-in or bayonet style closure. Finger-grip or screwdriver slots are available. All holders are rated for up to 250 volts with amp ratings ranging from 3A to 15A. 250 Volts 15 Amps screwdriver cap 3/16 QC/solder series.
Contact for Pricing

Medium Voltage E-Rated Fuse 38000VAC 15A Ferrule, Series: FPK Visual Indicator
Contact for Pricing

Fuse TR-R - Class RK5 - Time-Delay 250VAC 250VDC 300A Blade SmartSpot® Tri-Onic®
Contact for Pricing