Showing 4069-4080 of 452,163 results

Mencom Corporation · Mencom
MAC-4MR-4-SS
MAC, Receptacle, 4 Pole, Male Straight, 1Ft, 22awg, 4A, .25-NPT, Front Mount, Stainless Steel
Contact for Pricing

Mencom Corporation · Mencom
MAC-3MR-PG9-18
MAC, Receptacle, 3 Pole, Male Straight, 1Ft, 18awg, 4A, PG9, Front Mount, Nickel Plated Brass
Contact for Pricing

Contact for Pricing

Mencom Corporation · Mencom
MAC-5FR-2-2M
MAC, Receptacle, 5 Pole, Female Straight, 2m, 22awg, 4A, .5-NPT, Front Mount, Aluminum Clear Anodized
Contact for Pricing

Mencom Corporation · Mencom
MAC-6MFP-6M
MAC, Cordset, 6 Pole, Male Straight / Female Straight, 6M, 22awg, 4A, Yellow, PVC
Contact for Pricing

Mencom Corporation · Mencom
MDC-2FR-PG9
MDC, Receptacle, 2 Pole, Female Straight, 1Ft, 22awg, 4A, PG9, Front Mount, Nickel Plated Brass
Contact for Pricing

Mencom Corporation · Mencom
MDC-4MP-DP5
MDC, Accessory, 4 Pole, Male Straight, Dummy Plug, Pin 1 to Pin 3, Pin 2 to Pin 4
Contact for Pricing

Mencom Corporation · Mencom
MDC-4MP-DP4
MDC, Accessory, 4 Pole, Male Straight, Dummy Plug, Pin 1 to Pin 2, Pin 3 to Pin 4
Contact for Pricing

FUSE CLIP 22083. Circuit Board Mount Fuse Clips for 1/4” Diameter Fuses. 30A max.
Contact for Pricing
Minimum Qty: 1000
Multiplier: 1000
*Contact for lower quantities*

Littelfuse · E7800 Series
E7800.0640
Motorized Potentiometer24V DC,1turn 5k. The E7800 Motorized Potentiometer is typically used as an interface between increase/decrease relay contacts (or push buttons) and a device requiring control by an external potentiometer (e.g. the speed trim of an electronic governor). All three wires of the potentiometer are directly accessible on external connection terminals, thus providing the best possible flexibility for almost any application. A special version of the E7800 with DC voltage output is also available. The DC output voltage follows the position of the potentiometer. The design of the E7800 ensures that the potentiometer will “remember” its position although supply is lost
Contact for Pricing

Contact for Pricing
Minimum Qty: 10
Multiplier: 10
*Contact for lower quantities*

Mersen plug fuses are intended for industrial and residential applications. Non time-delay fuses are available for receptacle and lighting circuits and time-delay fuses for motor loads. For Canadian requirements, a type P fuse is used for non-motor loads and Type D, for electrical heating and cyclical load circuits. Both fuses have low melting-point temperature elements. Type S plug fuses are time-delay and tamper resistant. 125 Volts 15 Amps GP series. 125 Volts 20 Amps GT series.
Contact for Pricing
Minimum Qty: 4
Multiplier: 4
*Contact for lower quantities*