Showing 2305-2316 of 452,166 results

NSI Industries · Polaris · Connector Blocks
AL-R1-K6
Power Distribution Block (1) 500 MCM-4 AWG Primary (6) 2/0-14 AWG Secondary Power Distribution Blocks are made of high strength, high-conductivity aluminum alloy and are mounted in a high-strength glass-filled polyester base. Each block can stand alone or combine with other blocks to form a multi-block set.
Contact for Pricing

NSI Industries · Polaris · Easy-Splice
RSK-500
Easy-Splice Direct Burial Splice Kit with Rubber Cover 2/0 AWG - 500 MCM Direct Burial Splice Kits are dual-rated for use with copper and aluminum cable. These kits consist of an in-line mechanical set screw connector pre-filled with oxide inhibitor and an EPDM rubber insulating cover to ensure a watertight seal. Rated 600 Volts APPLICATIONS: Street lights, motor connection, irrigation systems, HVAC, outdoor lighting, and over wire nuts for a secure seal.
Contact for Pricing

Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*

NSI Industries · Polaris · Polaris Grey
IPLG3/0-3B
The Polaris IPLG3/0-3B Grey Multi-Tap Single Side Entry Connector features 3 ports sized for 3/0 - 4 AWG Class B, C or D wires or 2/0 - 2 AWG Class K, M or I wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each port is specially designed for fine-stranded copper wires with a pre-installed tin plated copper ferule that collapses as the screw is tightened to form a strong connection with fine-stranded wires. Removable access plugs cover the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing fine-stranded wire applications, including installation in cable trays, troughs, wire-ways, raceways, ducts and motor junction boxes.
Contact for Pricing

NSI Industries · Polaris · Polaris EDGE
ISPB350-4
The Polaris ISPB350-4 Multi-Tap Direct Burial Single-Sided Entry Connector features 4 ports sized for 350 MCM - 12 AWG wires. The body is made from aluminum alloy wrapped in a layer of high-dielectric strength rubber insulation. Each single-sided port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the radial-tipped set screws. Rated for temporary submersion, wet or damp locations and direct burial applications. Installs with a hex key and torque wrench, without any tape or additional supplies. Meets or exceeds ANSI C119.1 specifications for use in wet or damp locations and designed for use in a wide range of temporary submersal or burial splicing applications.
Contact for Pricing
Minimum Qty: 2
Multiplier: 2
*Contact for lower quantities*

NSI Industries · Polaris · Split Bolts
SPM-9L
Service Post Connector - One Wire Type 4/0 AWG Service Post Connectors is used for connecting one or two conductors. Made from high copper content hard-drawn rod. Lay-in feature makes them excellent for continuous loop grounding and bonding. Used to ground to bar or plate. Suitable for direct burial in earth or concrete.
Contact for Pricing

ABB - Electrification · GE · E150
TED113050
The E150 product line consists of Thermal Magnetic Circuit Breakers, Magnetic Circuit Breakers, and Molded-Case Switches rated up to 150 Amps and 600 Volts AC. Catalog numbers include the complete breaker or switch. The WL catalog number suffix indicates that the devices come with Cu/Al line and load lugs. TED 1 POLE 277/480V 14K IC 50 AMP
Contact for Pricing

ACS380 AC Drive, 3-200-240V In, 10HP, 30.8A, Type OPEN, 1.5 overload, Integrated, HxWxD 6.69x10.24x7.52 in, Module
SALE
Contact for Pricing
READY TO SHIP NOW

ABB - Installation Products · PMA
SVNV-G000
VN Straight Connector, GS Thread for IP68 Static Conduit - Thread GAS 1/4 Inch, Fits to Conduit Size NW/Metric 10/12, Color Gray
Contact for Pricing
Minimum Qty: 1500
Multiplier: 1500
*Contact for lower quantities*

ACS880 AC Drive, 3-380-500V In, 50HP, 74A, Type OPEN, 1.1 overload, Bluetooth, HxWxD 18.39x8.78x12.44 in, Module, Functional safety module 1
Contact for Pricing

The ABB DCS880 Demo Unit for single-phase drives is a versatile solution designed for industrial automation and motor control applications. This unit showcases ABB's advanced drive technology, offering reliable performance and precise control for single-phase motor systems. Ideal for training, demonstrations, and testing, the DCS880 Demo Unit ensures seamless integration with existing industrial setups. With its robust construction and user-friendly interface, it provides an efficient way to explore ABB's low-voltage drive capabilities. Whether for educational purposes or operational testing, this demo unit delivers the performance and reliability expected from ABB's renowned low-voltage drives.
Contact for Pricing

ABB - Installation Products · PMA
SGB-07
PMAFIX Galvanized Steel Tube Clamp, Fit to COFLEX Conduit Size NW - 07
Contact for Pricing