Showing 3733-3744 of 452,163 results

NSI Industries · Easy-Twist
WWC-B-C
The Easy-Twist WWC-B-C 100-Count Bag of Blue Winged Wire Connectors are designed for use on copper wires in the 14-6 AWG size range. They’re made of flame-retardant thermoplastic rated for a maximum temperature of 105Ëš Celsius (221Ëš Fahrenheit). The quick-grip square spring design grips in fewer twists and can dead-end a single wire, while the ergonomic swept-back wing design and ribbed texture makes them easy to twist. Their compact design is useful for applications in tight areas or anywhere else you need to connect wires.Â
Contact for Pricing
Minimum Qty: 50
Multiplier: 50
*Contact for lower quantities*

NSI Industries · Polaris · Polaris EDGE
ISPBS350
The Polaris ISPBS350 Multi-Tap Direct Burial Submersible In-Line Port Connector features 2 in-line ports sized for 350 MCM - 12 AWG wires. The body is made from aluminum alloy wrapped in a layer of high-dielectric strength rubber insulation. Each port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the radial-tipped set screws. Installs with a hex key and torque wrench, without any tape or additional supplies. Meets or exceeds UL486D and ANSI C119.1 specifications for use in wet or damp locations and designed for use in a wide range of temporary submersal or burial splicing applications.
Contact for Pricing
Minimum Qty: 3
Multiplier: 3
*Contact for lower quantities*

Contact for Pricing
Minimum Qty: 1000
Multiplier: 1000
*Contact for lower quantities*

Contact for Pricing
Minimum Qty: 250
Multiplier: 250
*Contact for lower quantities*

Contact for Pricing
Minimum Qty: 1000
Multiplier: 1000
*Contact for lower quantities*

Contact for Pricing
Minimum Qty: 500
Multiplier: 500
*Contact for lower quantities*

NSI Industries · Platinum Tools
18111
The Telcom Splicing Connectors utilize an insulation displacement contact design for fast, simple, reliable terminations. No wire stripping is required and connectors will accept wire of different gauges. All connectors are Gel filled to provide moisture resistance and inhibit corrosion. For use with solid copper conductors only. Typical uses include Butt Splicing 2 or 3 wires of the same or different gauges. Perfect for pigtail and load coil splice applications. Use the UB connector for tapping onto an existing conductor with no service interruption. This eliminates cutting of cable pairs or opening cable pairs., 899740000841
Contact for Pricing

Bolt, 1/2-13 in. size, 2-1/4 in. length, Hex head, Zinc, 50 per pack
Contact for Pricing
Minimum Qty: 50
Multiplier: 50
*Contact for lower quantities*

Self-Drilling & Tapping Drywall Screw, Steel material, #8 Size, 1 in. length, Fine thread type, Wafer head, Zinc finish, Phillips drive, Self Drill Point, 1000 per pack, Jar, including a(n) Power Bit. For use with 12 Gauge Steel Stud.
Contact for Pricing
Minimum Qty: 1000
Multiplier: 1000
*Contact for lower quantities*

Two Nail Staple, #14-2 or #12-2 AWG cable size, Non Metallic Cable type, 1/2 in. staple size, White, Plastic insulation, 100 per pack
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*

Hands Free Swivel Fixture, 2 hole(s), 4 in. Square, Round Electrical Boxes, 3/4 in. Pipe, Includes Reduced Bushing for 1/2 in. Pipe fits, 50 lb. load capacity, Single Electrician installation, 1 per pack, Rugged Hinge construction. For use with 4 in. Round Box, 3/4 in. Pipe, 1/2 in. Pipe.
Contact for Pricing

Eye Bolt with Hex Nut, 3/8-16 in. size, 5 in. length, 3 in. thread length, 1 in. eye diameter, Steel, Zinc Chromate finish, 25 per pack
Contact for Pricing
Minimum Qty: 25
Multiplier: 25
*Contact for lower quantities*