Showing 3061-3072 of 452,163 results
Contact for Pricing

Hewlett Packard Enterprise HPE
JW122A
HPE Aruba Networking PC-AC-JPN 125V/12A 1.8m C13 to JISC 8303 (JP) AC Power Cord
Contact for Pricing

TelCom Telephone Extension Ringer Device, Bell Signals Incoming Calls - Available in 120VAC. Activated by ringing voltage (analog telephone only). Type 1 enclosure. 98 dBa signal at 10 feet (108 dBa at 1 meter). CSA Certified. UL Listed for indoor use.
Contact for Pricing

Contact for Pricing

CompleTech
CA340Y+++
directional yagi - Frequency range: 326-353 MHz - Gain: 11 dBi - Polarization: vertical/horizontal - Connector: N-/ TNC-/ 7/16-female - VSWR: <1.5 - Radome: ABS/FG PU foam - Radiator material: copper - Mounting: 35-60 mm diameter pole - Wind load: 145 N
Contact for Pricing

CompleTech
CA350S2++++
directional stacked yagi array - Frequency range: 336-364 MHz - Gain: 14 dBi - Polarization: vertical/horizontal - Connector: N-/TNC-female - VSWR: <1.5 - Radome: ABS/FG PU foam - Radiator material: copper - Mounting: 35-60 mm diameter pole - Wind load: 348 N
Contact for Pricing

CompleTech
CA420F2++++
directional end fire yagi array - Frequency range: 405-440 MHz - Gain: 11 dBi - Polarization: vertical/horizontal - Connector: N-/TNC-female - VSWR: <1.5 - Radome: ABS/FG PU foam - Radiator material: copper - Mounting: 35-60 mm diameter pole - Wind load: 292 N
Contact for Pricing

CompleTech
CA930S2++++
directional stacked yagi array - Frequency range: 880-960 MHz - Gain: 14 dBi - Polarization: vertical/horizontal - Connector: N-female - VSWR: <1.5 - Radome: ABS/FG PU foam - Radiator material: copper - Mounting: 35-60 mm diameter pole - Wind load: 146 N
Contact for Pricing

Hammond Power · HPS · Distribution Accessories
NMP7
Distribution Transformer Accessories - Vibration Isolation Kit, 3451 to 4690 lbs
Contact for Pricing

ER-72KV is a sensing resistor accessory used on systems up to 72 kV (non-continuous duty) to monitor the continuity of a neutral-grounding resistor. It is an accessory for SE-330HV.
Contact for Pricing

Littelfuse · M1000 Series
M1000.0080
Alarm Annunciator12-24V DCIP54. The M1000 is an Alarm Monitor capable of surveying the state of up to 10 potential free contacts. The inputs of the M1000 can be used to monitor both normally open (NO) and normally closed (NC) contacts. Each contact can be sourced to a positive or negative reference. The M1000 includes a total of 10 inputs. Each input controls two bright red LEDs and an open collector output. A built-in relay provides audible alarm through control of an external siren. The first incoming alarm is indicated with a quick flashing light, following alarms are indicated with slow flashing light. LEDs will keep flashing until the alarms are acknowledged, even though the input signal has been deactivated. Pressing the RESET pushbutton will acknowledge all new alarms whereby all flashing LEDs will change to steady light, provided that the related inputs are still active. Pressing the RESET push button will also silence the siren. The reset sequence is programmable.
Contact for Pricing

For use with Littelfuse FLNR_ID/FLSR_ID, IDSR, LLNRK/LLSRK and KLNR/KLSR series fuses.
Contact for Pricing