Accessories

    Office Equipment and Accessories and Supplies

    Drives, Servos, and Motors

    Power Generation and Distribution Machinery and Accessories

    Structures, Building, and Construction

    Enclosures, Fans, and Environmental Controls

    Information Technology Broadcasting and Telecommunications

    Electronic Components And Supplies

    Safety Equipment and Supplies

    Tools and General Machinery

    Manufacturing Components and Supplies

    Distribution and Conditioning Systems and Equipment and Components

    Material Handling and Conditioning and Storage Machinery and their Accessories and Supplies

    Electrical Systems and Lighting and Components and Accessories and Supplies

    Laboratory and Measuring and Observing and Testing Equipment

    Industrial Manufacturing and Processing Machinery and Accessories

    Miscellaneous

Showing 2881-2892 of 452,163 results

nVent BPP50 - Bottom Profile, BPP, 483x35x13mm, Galvanized, Mild Steel
nVent · nVent HOFFMAN

BPP50


Bottom Profile, BPP, 483x35x13mm, Galvanized, Mild Steel

Contact for Pricing

NSI Industries 202015J - This Cat5e Combo Pack includes 50 of Platinum's RJ45 8-pin/8-position registered jack connectors used to connect computers onto Cat5e data networks and are recommended for data applicationsrated to 1 Gb. It simplifies twisted pair terminations by allowing the wires to be inserted through the connector and out the front. This allows the technician to easily verify the proper wiring order. In addition, it includes 50 pieces of Platinum's EZ-Strain Cat5e Strain Relief which is designed specifically to be crimped with the EZ-RJ45® connector. The primary strain relief of the plug locks the snag proof strain relief in place so they will not pull off, creating one, integral assembly. Once crimped, this design allows the plug's primary strain relief to relax slightly, preventing the cable pairs from being over compressed.
NSI Industries · Platinum Tools

202015J


This Cat5e Combo Pack includes 50 of Platinum's RJ45 8-pin/8-position registered jack connectors used to connect computers onto Cat5e data networks and are recommended for data applicationsrated to 1 Gb. It simplifies twisted pair terminations by allowing the wires to be inserted through the connector and out the front. This allows the technician to easily verify the proper wiring order. In addition, it includes 50 pieces of Platinum's EZ-Strain Cat5e Strain Relief which is designed specifically to be crimped with the EZ-RJ45® connector. The primary strain relief of the plug locks the snag proof strain relief in place so they will not pull off, creating one, integral assembly. Once crimped, this design allows the plug's primary strain relief to relax slightly, preventing the cable pairs from being over compressed.

Contact for Pricing

NSI Industries EWDT-RED - Easy-Wrap Red Duct Tape 1.88 x 60
NSI Industries · NSI · Easy-Wrap

EWDT-RED


Easy-Wrap Red Duct Tape 1.88 x 60

Contact for Pricing

NSI Industries WW-HR-20 - WarriorWrap WW-HR-20 Black High-Voltage Linerless Rubber Splicing Tape is strong enough for professional environments and gets the job done right the first time, every time. This tape is 30mil thick, 2 inches wide, 30ft long and has an ethylene rubber-based design. The self-bonding adhesive helps stick to uneven surfaces and easily conforms to irregular shapes. Top breaking strength and elasticity make WarriorWrap an excellent choice for insulating, jacketing of splices on power cables, jacketing terminations or for building stress cones.
NSI Industries · WarriorWrap

WW-HR-20


WarriorWrap WW-HR-20 Black High-Voltage Linerless Rubber Splicing Tape is strong enough for professional environments and gets the job done right the first time, every time. This tape is 30mil thick, 2 inches wide, 30ft long and has an ethylene rubber-based design. The self-bonding adhesive helps stick to uneven surfaces and easily conforms to irregular shapes. Top breaking strength and elasticity make WarriorWrap an excellent choice for insulating, jacketing of splices on power cables, jacketing terminations or for building stress cones.

Contact for Pricing

NSI Industries R8-14N-BULK - 1/2" REBAR CLAMP
NSI Industries · NSI

R8-14N-BULK


1/2" REBAR CLAMP

Contact for Pricing

Minimum Qty: 100

Multiplier: 100

*Contact for lower quantities*

NSI Industries SDLC3 - Double Loop Chain, #3, 0.080 in. diameter, 18-8 Stainless Steel 100 feet per box
NSI Industries · Metallics

SDLC3

21570


Double Loop Chain, #3, 0.080 in. diameter, 18-8 Stainless Steel 100 feet per box

Contact for Pricing

NSI Industries WDS2B - Self-Drilling & Tapping Drywall Screw, Steel material, #8 Size, 3/4 in. length, Fine thread type, Wafer head, Zinc finish, Phillips drive, Self Drill Point, 10000 per pack, Carton, including a(n) 3 Power Bits. For use with 12 Gauge Steel Stud.
NSI Industries · Metallics

WDS2B

27096


Self-Drilling & Tapping Drywall Screw, Steel material, #8 Size, 3/4 in. length, Fine thread type, Wafer head, Zinc finish, Phillips drive, Self Drill Point, 10000 per pack, Carton, including a(n) 3 Power Bits. For use with 12 Gauge Steel Stud.

Contact for Pricing

Minimum Qty: 10000

Multiplier: 10000

*Contact for lower quantities*

NSI Industries WMC-33 - Wire Marker Cards (#33) vinyl impregnated cloth markers 1.5" long
NSI Industries · NSI · Wire Management

WMC-33


Wire Marker Cards (#33) vinyl impregnated cloth markers 1.5" long

Contact for Pricing

NSI Industries ATC-3R - 10 Amp Battery Clip W/ Molded Vinyl Boot-Red
NSI Industries · NSI · Miniterms

ATC-3R


10 Amp Battery Clip W/ Molded Vinyl Boot-Red

Contact for Pricing

NSI Industries IT-1/0 - The Polaris IT-1/0 Multi-Tap Single-Side Entry Connector features 2 ports sized for 1/0 AWG to 6 AWG wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Dual rated for use with copper or aluminum cables. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.
NSI Industries · Polaris · Polaris Black

IT-1/0


The Polaris IT-1/0 Multi-Tap Single-Side Entry Connector features 2 ports sized for 1/0 AWG to 6 AWG wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Dual rated for use with copper or aluminum cables. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.

Contact for Pricing

Minimum Qty: 6

Multiplier: 6

*Contact for lower quantities*

NSI Industries ISR-500 - The Polaris ISR-500 Multi-Tap In-Line Entry Connector features 2 ports sized for 500 MCM - 4 AWG wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.
NSI Industries · Polaris · Polaris Black

ISR-500


The Polaris ISR-500 Multi-Tap In-Line Entry Connector features 2 ports sized for 500 MCM - 4 AWG wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.

Contact for Pricing

Minimum Qty: 2

Multiplier: 2

*Contact for lower quantities*

NSI Industries DLC400BP - The TORK DLC400BP SunSet 365-Day Astronomic Digital Timer is designed for providing total control over 4 different output channels in indoor or outdoor applications. Automate your home or office to save energy and money using the intuitive programming interface and light sensitive activation to activate lights or signage when the ambient light level drops below a customizable threshold. Features four output channel, different settings for holidays and seasons and a 6-month battery backup. Designed for commercial applications including lighting, HVAC equipment, signage, store windows and security or parking lot lights.
NSI Industries · TORK · Digital Time Controls

DLC400BP


The TORK DLC400BP SunSet 365-Day Astronomic Digital Timer is designed for providing total control over 4 different output channels in indoor or outdoor applications. Automate your home or office to save energy and money using the intuitive programming interface and light sensitive activation to activate lights or signage when the ambient light level drops below a customizable threshold. Features four output channel, different settings for holidays and seasons and a 6-month battery backup. Designed for commercial applications including lighting, HVAC equipment, signage, store windows and security or parking lot lights.

Contact for Pricing

Showing 2881-2892 of 452,163 results