Copper Split Bolt Connector 1000 MCM Copper Split Bolt Connectors are high-strength solderless service connectors made of high-copper alloy for copper and copperweld wires. Type for two maximum wire sizes.

Service Post Connector - One Wire Type 1/0 AWG Service Post Connectors is used for connecting one or two conductors. Made from high copper content hard-drawn rod. Lay-in feature makes them excellent for continuous loop grounding and bonding. Used to ground to bar or plate. Suitable for direct burial in earth or concrete.

Service Post Connector - One Wire Type 2/0 AWG Service Post Connectors is used for connecting one or two conductors. Made from high copper content hard-drawn rod. Lay-in feature makes them excellent for continuous loop grounding and bonding. Used to ground to bar or plate. Suitable for direct burial in earth or concrete.

Service Post Connector - Two Wire Type 10 SOL - 7 STR Service Post Connectors is used for connecting one or two conductors. Made from high copper content hard-drawn rod. Lay-in feature makes them excellent for continuous loop grounding and bonding. Used to ground to bar or plate. Suitable for direct burial in earth or concrete.

Copper Split Bolt Connector 2/0 AWG Copper Split Bolt Connectors are high-strength solderless service connectors made of high-copper alloy for copper and copperweld wires. Type for two maximum wire sizes.

Pre-Insulated Service Entry Sleeves 1-2 Str - 4 Sol Pre-insulated service entry sleeves are used for fast and easy installation with standard tools. For combinations of aluminum-aluminum and aluminum-copper conductors. Meets the requirements of ANSI C119.4. Rated 600 Volts.

Stranded Bi-Metallic Pin Terminal 750 MCM Stranded Bi-Metallic Pin Terminals is designed to facilitate termination of aluminum conductors. Tin-plated stranded copper pin. Connector bores are coated with oxide inhibitor. Supplied with EPDM insulating cover. UL 486B listed. Rated 600 volts.

#9 x 2 Bugle Head Square Drive Type 17 Point Deck Screw All Weather Coating Zinc u/m 100

Rubber Tarp Strap, S-Hooks and Rubber Strap construction, 35 in. length, Black, 31 in. strap length

Light Duty Wall Anchor Kit, 3/16 in. Size, 201 piece(s), Plastic, Red, including a(n) (100) #8 x 1 in. Pan Combo Screws and (100) 3/16 in. Red Plastic Anchors and (1) 3/16 in. Masonry Drill

Installation tool, Steel construction, 1.01 lb. weight per package, Sleeve Bit Receiver, Hex Wrench and 25/64 in. Drill Bit included

Stud Anchor, 1/2 in. diameter, 4-1/4 in. length, 2-1/4 in. minimum embedment depth, 1-1/4 in. thread length, 1/2 in. drill size, Hex head, Steel material, Zinc Chromate finish, 25 per pack