Braking Resistor, 2 OHMS, 3600 WATTS, GCE6 Enclosure, 19W x 10D x 5H in, 23 lbs

ACS550 AC Drive, 3-380-480V In, 10HP, 15.4A, Type 1/IP21, 1.1 overload, Advanced, 18.5 x 4.9 x 8.7 in, Wall, DeviceNet, Pulse encoder

Braking Resistor, 22.32 OHMS, 4823 WATTS, GCE9 Enclosure, 26.5W x 10D x 5H in, 23 lbs

Braking Resistor, 4.3 OHMS, 43000 WATTS, ED3 Enclosure, 30W x 18D x 24H in, 205 lbs

WALL-MOUNTED DRIVE ULTRA LOW HARMONIC , Product Family: ACS800, Horsepower: 60 HP, Output Current: 78 A, Voltage: 480 VAC, Voltage Range: 380-500V, NEMA 1 / UL Type 1 (IP21), Wall-mounted, Local or Remote Mounted LCD Display and Keypad, ModBus Adapter, Analog I/O Extension Module, Digital I/O Extension Module, Pump Control software, 0060 KVA, 3-Phase Input, 3-Phase Output, Frame: R5, Product HxWxD: 32.12 in x 10.43 in x 15.35 in, Product Weight: 144 lbs

MODULE DRIVE 4-QUADRANT (REVERSING), Product Family: DCS800, Horsepower: 5 HP @ 230 VAC / 10 HP @ 460 VAC, Output Current: 23 A @ 240 VDC / 23 A @ 500 VDC, Voltage: 230 VAC/240 VDC & 460 VAC/500 VDC, UL TYPE OPEN (IP00), Mounting: Wall-mount, DDCS Communications Board, Drive-to-drive Communication Board, 3-Phase Input, Frame: D1, Product HxWxD: 14.6 in x 10.6 in x 7.9 in, Product Weight: 24 lbs

CABINET DRIVE ULTRA LOW HARMONIC, Product Family: ACS800, Horsepower: 550 HP, Output Current: 672 A, Voltage: 480 VAC, Voltage Range: 380-500V, NEMA 1 / UL Type 1 (IP21), Mounting: Floor-mounted, Local or Remote Mounted LCD Display and Keypad, 3-Phase Input, 3-Phase Output, Frame: R8i, Product HxWxD: 91.1 in x 48.4 in x 25.4 in, Product Weight: 2090 lbs

GENERAL PURPOSE PACKAGED DRIVE W/ DISCONNECT SWITCH AND FUSES, Product Family: ACS550, Horsepower: 7.5 HP, Output Current: 11.9 A, Voltage: 480 VAC , Voltage Range: 380-480V, NEMA 1 / UL Type 1 (IP21), Mounting: Wall-mounted, Advanced Control Panel, Relay Output Extention, 115/230V Digital Input Interface, 3-Phase Input, 3-Phase Output, Frame: R1, Product HxWxD: 28.7 in x 7.8 in x 11.2 in, Product Weight: 33 lbs

WALL-MOUNTED DRIVE REGENERATIVE, Product Family: ACS800, Horsepower: 20 HP, Output Current: 29 A, Voltage: 480 VAC , Voltage Range: 380-500V, NEMA 1 / UL Type 1 (IP21), Wall-mounted, Local or Remote Mounted LCD Display and Keypad, ProfiBus-DP Adapter, 3-Phase Input, 3-Phase Output, Frame: R5, Product HxWxD: 32.12 in x 10.43 in x 15.35 in, Product Weight: 144 lbs

Braking Chopper, Nominal AC Line Voltage 380-480V, Minimum 2.19 OHM, RMS Continuous Load Current 115 A

MACHINERY DRIVE, Product Family: ACS850, Horsepower: 40 HP, Output Current: 57 A, Voltage: 480 VAC, Voltage Range: 380-500V, UL TYPE OPEN (IP20), Mounting: Cabinet-mounted (Side-by-Side), Cabinet Mount Control Panel, 3-Phase Input, 3-Phase Output, Frame: D, Product HxWxD: 22.3 in x 8.7 in x 10.9 in, Product Weight: 51 lbs

The DeviceNet network uses a linear bus topology. Terminating resistors are required on each end of the trunk line. Drop lines as long as 6 meters (20 feet) each are permitted, allowing one or more nodes to be attached. DeviceNet allows branching structures only on drop lines.