Showing 9013-9024 of 451,803 results

NSI Industries · RHINO Safety
SH-200Y
The RHINO Safety SH-200Y Full-Brim Safety Helmet made from durable polypropylene is impact and penetration resistant for use on demanding jobsites. The 4-point ratcheting assembly is fully adjustable to fit most heads, with a removable brow pad for increased comfort. This professional-grade hard hat meets CE0086 EN397: 2012 + A1 2012 certification, as well as ANSI Z89.1 – 2014, Type 1 – Class E certification for performance.
Contact for Pricing

NSI Industries · PowerGRP
GRP-11500
The PowerGRP GRP-11500 100-Count Resealable Pack of Type 21S AH-2 Black-Colored General-Purpose Cable Ties are 11†long, with 50lb of tensile strength for professional applications. They’re made from polyamide 6,6 nylon, resulting in a high mechanical strength and a wide temperature range (-40 F to 185 F). Fasten these 11†cables ties around a wide range of equipment with a bundle diameter between .08†(2mm) to 2.99†(76mm), using the bent tips and serrated locking mechanism to form an effortless and secure grip. Designed for cable management in industrial applications and use in plenum spaces.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*

Contact for Pricing
Minimum Qty: 500
Multiplier: 500
*Contact for lower quantities*

NSI Industries · Polaris · Polaris Black
IPLD750-3B
The Polaris IPLD750-3B Multi-Tap Dual-Sided Entry Connector features 3 ports sized for 750 - 250 MCM wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each dual-sided port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.
Contact for Pricing

NSI Industries · Polaris · Polaris Black
IPLD750-4B
The Polaris IPLD750-4B Multi-Tap Dual-Sided Entry Connector features 4 ports sized for 750 - 250 MCM wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each dual-sided port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.
Contact for Pricing

NSI Industries · Polaris · Polaris Black
IPLD750-14
The Polaris IPLD750-14 Multi-Tap Dual-Sided Entry Connector features 14 ports sized for 750 - 250 MCM wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each dual-sided port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.
Contact for Pricing

Contact for Pricing

NSI Industries · Polaris · Polaris Vision Tap
IPL4-3CB
The Polaris IPL4-3CB Multi-Tap Single Side Entry Vision Tap Connector features 3 ports sized for 4 - 14 AWG wires. The clear body allows users to see their conductor placement and is wrapped in a layer of plastisol insulation. Each port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.
Contact for Pricing

NSI Industries · Polaris · Polaris Vision Tap
IPLD600-3CB
The Polaris IPLD600-3CB Multi-Tap Dual-Sided Entry Vision Tap Connector features 3 ports sized for 600 MCM - 6 AWG wires. The clear body allows users to see their conductor placement and is wrapped in a layer of plastisol insulation. Each dual-sided port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies, and comes packaged in a clear plastic bag with a mounting hole for hanging in retail displays. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.
Contact for Pricing

NSI Industries · Polaris · Polaris Vision Tap
IPLD750-3CB
The Polaris IPLD750-3CB Multi-Tap Dual-Sided Entry Vision Tap Connector features 3 ports sized for 750 - 250 MCM wires. The clear body allows users to see their conductor placement and is wrapped in a layer of plastisol insulation. Each dual-sided port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies, and comes packaged in a clear plastic bag with a mounting hole for hanging in retail displays. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.
Contact for Pricing

Contact for Pricing

Contact for Pricing