Showing 3433-3444 of 452,163 results

NSI Industries · Platinum Tools
18111
The Telcom Splicing Connectors utilize an insulation displacement contact design for fast, simple, reliable terminations. No wire stripping is required and connectors will accept wire of different gauges. All connectors are Gel filled to provide moisture resistance and inhibit corrosion. For use with solid copper conductors only. Typical uses include Butt Splicing 2 or 3 wires of the same or different gauges. Perfect for pigtail and load coil splice applications. Use the UB connector for tapping onto an existing conductor with no service interruption. This eliminates cutting of cable pairs or opening cable pairs., 899740000841
Contact for Pricing

Contact for Pricing

NSI Industries · NSI
ITO-4CB
The Polaris ITO-4CB Multi-Tap Offset Dual-Side Entry Vision Tap Connector features 2 ports sized for 4 - 14 AWG wires. The clear body allows users to see their conductor placement and is wrapped in a layer of plastisol insulation. Each port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies, and comes packaged in a clear plastic bag with a mounting hole for hanging in retail displays. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.
Contact for Pricing

NSI Industries · Polaris
ITD-2/0
The Polaris ITD-2/0 Multi-Tap Dual-Sided Entry Vision Tap Connector features 2 ports sized for 2/0 - 14 AWG wires. The clear body allows users to see their conductor placement and is wrapped in a layer of plastisol insulation. Each dual-sided port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.
Contact for Pricing

NSI Industries · Polaris · Polaris Vision Tap
ITD-2/0C
The Polaris ITD-2/0C Multi-Tap Dual-Sided Entry Vision Tap Connector features 2 ports sized for 2/0 - 14 AWG wires. The clear body allows users to see their conductor placement and is wrapped in a layer of plastisol insulation. Each dual-sided port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.
Contact for Pricing

Square Nut, 1/2-13 in. size, 13/16 in. width, 7/16 in. height, Zinc Plated finish, 50 per pack
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*

Bolt, 3/8-16 in. size, 5 in. length, Hex head, Zinc, 50 per pack
Contact for Pricing
Minimum Qty: 50
Multiplier: 50
*Contact for lower quantities*

Contact for Pricing
Minimum Qty: 500
Multiplier: 500
*Contact for lower quantities*

6 x 3/8 Indented Hex (1/4) Hd Slot Tapping Screw Zinc u/m 500
Contact for Pricing
Minimum Qty: 500
Multiplier: 500
*Contact for lower quantities*

Contact for Pricing
Minimum Qty: 500
Multiplier: 500
*Contact for lower quantities*

#10 x 1 Hex Washer (5/16) Hd Drill Tip #3 Point Zinc u/m 500
Contact for Pricing
Minimum Qty: 500
Multiplier: 500
*Contact for lower quantities*

Contact for Pricing
Minimum Qty: 500
Multiplier: 500
*Contact for lower quantities*