Showing 2569-2580 of 452,163 results

Contact for Pricing

Contact for Pricing

Contact for Pricing

ABB - Electrification · ABB
MP4-11Y
Modular Pushbutton - Maintained - Extended - Yellow - Illuminated - Black plastic - No contact block
Contact for Pricing

ABB - Electrification · GE · GE Industrial Solution
AF76SLW
General Electric Lighting Panelboards. A-Series Fronts 6SLW6231
Contact for Pricing

ABB - Electrification · GE
AF64S
A-Series Panel boards. Pro-Stock, Unassembled Lighting Panels. Standard. Select a front of the correct height. F64S A-SERIES FRONT
Contact for Pricing

NSI Industries · Polaris · Polaris Grey
SITG-1
The Polaris SITG-1 10-Pack of Replacement Sleeves fit Polaris Grey Multi-Tap Connectors sized for 1 – 10 AWG wires. The sleeves are made from tin plated copper and rated for up to 600V charges. The set screws in Polaris Grey connectors crimp the internal sleeve when tightened, ensuring a strong connection with fine-stranded copper wires. These replacement sleeves allow connectors to be re-used like brand new. Use these connectors in a wide range of splicing fine-stranded wire applications, including installation in cable trays, troughs, wire-ways, raceways, ducts and motor junction boxes.
Contact for Pricing

NSI Industries · TORK · Digital Time Controls
LC200
Tork 2 Zone SPDT Lighting Control Use to control two different outdoor lighting circuits utilizing one photocell. Sign lighting can turn ON at one ambient light level while parking lot lighting turns ON at a different light level. APPLICATIONS: 24 Hour Convenience Stores Open Wall Parking Structures Large Canopies Building Perimeters Atriums FEATURES: INPUT VOLTAGE: 120/240/277VAC, 50/60Hz OUTPUT CONTACTS: SPDT NO. OF ZONES: 2 Zones TERMINAL RANGE: Relay #12AWG- input power terminals #14-#22AWG- TOD/sensor terminals accept #18-#22AWG. POWER CONSUMPTION: 5VA Maximum OPERATING TEMPERATURE: - 40 degrees to +140 degrees F (-40 degrees C to +60 degrees C) PHOTOSENSOR INPUT: EPC1 Included. DUAL OUTPUTS: With independent turn-ON adjustment for Stage 1 and Stage 2. LIGHT LEVEL ACTIVATION: Turn ON is user settable from 2 to 100 footcandle- Independent light level adjustment for each zone. Turn OFF is a maximum of 2 times turn ON level. Built-in delay ON of 30 seconds to avoid reaction to lightning or headlights. SWITCHED INPUT: Can be used with a time switch for photocell ON of two different lighting circuits at different ambient light levels, then time-of-day OFF. ENCLOSURE: Metal Indoor NEMA 1 with lockable hasp. MANUFACTURER: Tork, UPC: 786261821119 CONTACT RATINGS: GENERAL PURPOSE: 120/240 VAC NO: 20A NC: 10A 277 VAC NO: 12A BALLAST: 120 VAC NO: 20A NC: 10A 240/277 VAC NO: 6A NC: 3A TUNGSTEN: 120/240/277 VAC NO: 5A NC: 3A PILOT DUTY: 120/240 VAC NO: 470VA NC: 275VA 277 VAC NO: 690VA
Contact for Pricing

Contact for Pricing

NSI Industries · WarriorWrap
WW-VMR-40
WarriorWrap WW-VMR-40 Gray Insulating Vinyl Mastic Tape is strong enough for professional environments and gets the job done right the first time, every time. This tape is 1.33in thick, 4 inch wide, 10ft long and is made from temperature-stable materials. The self-bonding design conforms to irregular shapes with a mastic adhesive that forms a secure and moisture-resistant bond for outdoor use. Top breaking strength, elongation and elasticity make WarriorWrap an excellent choice for protecting buried low voltage connections and devices, terminations, overhead connectors, duct seal or cable end seals in outdoor environments.
Contact for Pricing

NSI Industries · Polaris · Grounding
GRC-100H
We built the NSI GRC-100H Heavy Duty Silicon Bronze 1" Ground Clamp for demanding applications including direct burial, where the simple mechanical design and reliable clamping power of the screw outperform other options. GRC-family clamps with the -SB suffix have a body and screw made from silicon bronze for maximum strength, and the clamp is UL-listed for direct burial in earth or concrete. Stock products you can rely on—stock NSI.
Contact for Pricing

NSI Industries · Polaris · Compression
ISE66
Pre-Insulated Service Entry Sleeves 3-4 Str -6 Sol Pre-insulated service entry sleeves are used for fast and easy installation with standard tools. For combinations of aluminum-aluminum and aluminum-copper conductors. Meets the requirements of ANSI C119.4. Rated 600 Volts.
Contact for Pricing