Showing 3469-3480 of 452,163 results

Contact for Pricing
Minimum Qty: 10
Multiplier: 10
*Contact for lower quantities*

Panduit
SLCT-WH
The SLCT-WH Self-Laminating Cable Marker Holder Label is a durable tag designed to mark a wide range of cables and cable bundles. It can be used with printer generated labels or hand-written. A clear overlaminate protects the legend. The Marker Holder can be applied as a wrap-around marker or flag marker. Self-Laminating Vinyl. 3" x 1.31" (76.20 mm x 33.30 mm). Color White. 25 tags per package.
Contact for Pricing
Minimum Qty: 4
Multiplier: 1
*Contact for lower quantities*

Panduit
FIDT2X2LBL
The FiberRunner 1-Port Spillout is used with a 2x2 fitting. The spillout is used to route cable into three separate 1.5 inch (3.8mm) diameter split corrugated tubing.
Contact for Pricing

Panduit
FZ2RPU1U1ONM6.5
OM4 duplex fiber patch cord with a 2.0mm cable jacket. Plenum rated, features LC Uniboot pull-boot connectors, and has Optimized insertion loss, 6.5 meters in length
Contact for Pricing
Minimum Qty: 10
Multiplier: 1
*Contact for lower quantities*

Contact for Pricing

Contact for Pricing

Panduit
FD1W12BUDLCZ
The fiber drawer is pre-loaded with 12 blue singlemode duplex LC adapters with zirconia sleeves. It is black powdered coated steel and measures 1.73 inches H x 17.5 inches W x 12.1 inches D (44mm x 445mm x 308mm)
Contact for Pricing

Contact for Pricing

Hitachi Energy
L99M656100D
SSVT-650 Outdoor Oil-Filled Station Service Voltage Transformer, Nominal System Voltage=138kV, BIL=650kV, Operating Frequency=60Hz, Ratio=Power Winding & 700/1200:1, Accuracy=0.15 Z, Thermal Rating=100kVA, Primary Voltage=80500V, Secondary Voltage=120/240V and one metering output, Bushings=1, Bushing Creep/Strike=149.8/48.5"min, Rated Altitude=3300Ft, Bushing Material=Porcelain
Contact for Pricing

Contact for Pricing

ABB - Electrification · ABB
2TLA050001R0100
Mechanical Safety interlock switch, rugged polyester housing and head, 12N holding force. 2NC+1NO (actuator inserted). 3x M20 conduit entries. Delivered with no key.
Contact for Pricing

ABB - Electrification · ABB
NFZ31E-23
NFZ contactor relays are used for switching auxiliary and control circuits. NFZ contactor relays include an electronic coil interface accepting a wide control voltage Uc min. ... Uc max. Only four coils cover control voltages between 24...250 V 50/60 Hz or 12...250 V DC. NF contactor relays can manage large control voltage variations. One coil can be used for different control voltages used worldwide without any coil change NFZ contactor relays allow direct control by PLC-output ⥠24 V DC 500 mA and obtain a reduced holding coil consumption. NFZ contactor relays withstand short voltage dips and voltage sags (SEMI F47-0706 compliance) between 24...250 V 50/60 Hz NFZ contactor relays have built-in surge protection and do not require additional surge suppressors - Poles: 4-pole contactor relays (mechanically-linked auxiliary contacts compliant with Annex L of IEC 60947-5-1 and including the "Mechanically Linked" symbol on the contactor relay side) - Control Circuit: AC or DC operated - Accessories: a wide range of Accessories is available.
Contact for Pricing