Showing 3325-3336 of 452,163 results

Contact for Pricing

ABB - Installation Products · OCAL
RS12-W
PVC Coated 4 Inch Square Box Surface Cover, 1/2 Inch Deep, 5 Cubic Inch for use with One Duplex Flush Receptacle, White
Contact for Pricing

Contact for Pricing

ABB - Installation Products · Steel City
CWN-25
Gangable Switch Box, 14 Cubic Inches, 3 Inches Long x 2 Inches Wide x 2-3/4 Inches Deep, 1/2 Inch Knockouts, Pre-Galvanized Steel, Non-Metallic Cable Clamps (C-5) and Ears Flush, For use with Non-Metallic Sheathed Cable
Contact for Pricing
Minimum Qty: 25
Multiplier: 25
*Contact for lower quantities*

ABB - Installation Products · Color-Keyed
MDBOOT-3
KUBE 600kV Insulator Boot for Disconnect Series MD-M and MD-F, Insulates Body Size 3, Black Thermoplastic Rubber
Contact for Pricing

GENERAL PURPOSE PACKAGED DRIVE W/ DISCONNECT SWITCH AND FUSES, Product Family: ACS550, Horsepower: 7.5 HP, Output Current: 11.9 A, Voltage: 480 VAC , Voltage Range: 380-480V, NEMA 1 / UL Type 1 (IP21), Mounting: Wall-mounted, Advanced Control Panel, 3-Phase Input, 3-Phase Output, Frame: R1, Product HxWxD: 28.7 in x 7.8 in x 11.2 in, Product Weight: 33 lbs
Contact for Pricing

MODULE DRIVE 4-QUADRANT (REVERSING), Product Family: DCS800, Horsepower: 200 HP @ 230 VAC / 500 HP @ 460 VAC, Output Current: 780 A @ 240 VDC / 806 A @ 500 VDC, Voltage: 230 VAC/240 VDC & 460 VAC/500 VDC, UL TYPE OPEN (IP00), Mounting: Wall-mount, DDCS Communications Board, 120 VAC Fan Voltage, 3-Phase Input, Frame: D4, Product HxWxD: 25.4 in x 10.6 in x 13.6 in, Product Weight: 84 lbs
Contact for Pricing

The RDCO-01 module includes the connectors for fiber optic DDCS channels CH0, CH1, CH2 and CH3. The usage of these channels is determined by the application but are normally assigned to the following: CH0 – overriding system (e.g. fieldbus adapter) - 10 MBd. CH1 – I/O extensions - 5MBd. CH2 – Master/Follower link - 10 MBd. CH3 – PC tools (such as DriveWare) - 10 MBd.
Contact for Pricing

The three phase field supply converters DCS800-S01 and -S02 drives need a separate active over voltage protection for proper operation on the inductive load of a motor field. This unit will protect the drive against inadmissible high voltages. The DCF506-0520 is to be used with -0200-05 through -0520-05 units.
Contact for Pricing

Braking Resistor, 200 OHMS, 600 WATTS, GCE2 Enclosure, ABB, 12W x 7D x 5H in, 10 lbs
Contact for Pricing

Braking Resistor, 22 OHMS, 3168 WATTS, GCE8 Enclosure, 19W x 13D x 5H in, 25 lbs
Contact for Pricing

Contact for Pricing