Showing 2365-2376 of 452,163 results

Contact for Pricing

Contact for Pricing

Safeway® Phenolic Hand Lamp with 100W Screw Release Guard Switch and Receptacle
Contact for Pricing

Mersen GPM-G panel mount fuse holders will accommodate 1/4"x1-1/4" fuses most are approved by U.L. and CSA. Cap and body material is bakelite or polycarbonate and function as a screw-in or bayonet style closure. Finger-grip or screwdriver slots are available. All holders are rated for up to 250 volts with amp ratings ranging from 3A to 15A. 250 Volts 10 Amps finger grip or screw cap 3/16 solder/QC terminal series.
Contact for Pricing

Contact for Pricing

Contact for Pricing
Minimum Qty: 10
Multiplier: 10
*Contact for lower quantities*

FSPDB Series UL 1059 Finger-Safe Power Distribution Block 1500V 175A - 175A Tin-plated Aluminum 1-Pole 1 - 4 openings; 2/0 - #14 --- #2 - #14
Contact for Pricing
Minimum Qty: 3
Multiplier: 3
*Contact for lower quantities*

Contact for Pricing
Minimum Qty: 10
Multiplier: 10
*Contact for lower quantities*

The ISS-105 is a “smart” five-channel intrinsically safe relay and pump controller. The ISS-105 can be configured for a wide variety of applications including alternating or non-alternating duplex, duplex separate pump stop (SPS), triplex and quadplex applications. It can be set up for pump-up or pump-down applications or can be used as a five-channel relay. The ISS-105 has a long list of features that are needed for multiple pump applications. The ISS-105 can indicate low, high and out-of-sequence alarms. If an out-of-sequence alarm occurs, the skipped pump(s) will be started as intended. The Model ISS-105 can be set up to do non-alternating control, alternating control and alternating control with one non-alternating pump. The non-alternating pump is intended for use with an emergency or jockey pump. The ISS-105 can start an emergency pump once every 50 cycles to keep it working freely. Using the built-in DIP switches, individual pumps can be disabled when taken out of service for repair or maintenance.
Contact for Pricing

The Littelfuse 600 V in-line watertight fuse holders are the ideal answer for all high humidity and corrosive environments where fuses are required. Available in both breakaway and non-breakaway, single and double pole versions, these fuse holders allow maximum flexibility for any application.
Contact for Pricing
Minimum Qty: 10
Multiplier: 10
*Contact for lower quantities*

Meltric
31-38015-E525
DS3 INLET POLY BLUE | Size 3 IP 54 1P+N+G | 50A 230 VAC 50 Hz ENGINEERED CUSTOM ASSEMBLY
Contact for Pricing

SolaHD
SCD30S24-DN
Encapsulated DC toDC Converter, 30 Watt, Switching DC Power Supply, 24 Volts, Output Voltage 24 Vdc, 1.3 A
Contact for Pricing