Showing 2593-2604 of 452,163 results

Braking Resistor, 3.6 OHMS, 17640 WATTS, GCE24 Enclosure, 28W x 13D x 10H in, 82 lbs
Contact for Pricing

Contact for Pricing

Contact for Pricing

ABB - Installation Products · STEEL CITY
MBP
Masonry Box Partition, 3-3/4 Inches Wide x 3-1/2 Inches Deep, Galvanized Steel, Low Voltage, Drilled and Tapped for Mounting, Furnished with Two 8/32 Screws
Contact for Pricing

DCS880 DC Drive, 3-400-525 In, 300, 490A, Type OPEN, 1.1 overload, Local or Remote Mounted LCD Display and Keypad, HxWxD 18.11x10.63x12.48 in, Wall, DDCS communication 3
Contact for Pricing

ABB - Installation Products · Ocal
EZD311-G
PVC Coated Sealing Fitting for Hazardous Locations, EZD Series, Pipe Size 1 Inch/27 Metric, Gray
Contact for Pricing

ABB - Installation Products · Steel City
OWC
Old Work Box Support Clip. Clips Lock Old-Work Steel Switch Boxes Tightly To Wall Plaster, Dry Wall, Concrete Block, Brick Or Concrete. Adapts To Any Wall Thickness Up To 3/4 Inch
Contact for Pricing
Minimum Qty: 250
Multiplier: 250
*Contact for lower quantities*

ABB - Installation Products · SUPERSTRUT
B1400S 10
Channel, 14 Gauge, 1-5/8 Inch x 13/16 Inch, Length 10 Feet, Slotted Steel with 7/16 Inch x 3 Inch Slots on 4 Inch Centers
Contact for Pricing
Minimum Qty: 500
Multiplier: 500
*Contact for lower quantities*

CompleTech
CA420Y++
directional yagi - Frequency range: 405-440 MHz - Gain: 10 dBi - Polarization: vertical/horizontal - Connector: N-/ TNC-/ 7/16-female - VSWR: <1.5 - Radome: ABS/FG PU foam - Radiator material: copper - Mounting: 35-60 mm diameter pole - Wind load: 92 N
Contact for Pricing

CompleTech
CA430GP+
omnidirectional ground plane - Frequency range: 426-434 MHz - Gain: 6 dBi - Polarization: vertical - Connector: N-/TNC-female - VSWR: <1.5 - Radome: FG PU foam - Radiator material: copper - Mounting: 35-60 mm diameter pole - Wind load: 44 N
Contact for Pricing

Contact for Pricing
Minimum Qty: 10
Multiplier: 10
*Contact for lower quantities*

FSPDBs introduce a new level of safety and ease for installing power distribution blocks. An IP20 level of finger safe protection is achieved using the FSPDBs and thus eliminates the need for special covers or custom Plexiglas sheets to protect your panels. FSPDBs (sizes 1 to 4) simply snap onto 35mm DIN rail to provide the quickest installation. And since they are modular, you can form any number of poles desired. If multi-pole panel mounting is desired, multiple-pole assembly pins are available. FSPDBs provide a safe, convenient way of splicing cables, splitting primary power into a variety of secondary circuits or providing a fixed junction tap-off point. size 2 cap .
Contact for Pricing
Minimum Qty: 10
Multiplier: 10
*Contact for lower quantities*