Showing 2005-2016 of 452,163 results

The three phase field supply converters DCS800-S01 and -S02 drives need a separate active over voltage protection for proper operation on the inductive load of a motor field. This unit will protect the drive against inadmissible high voltages. The DCF506-0140 is to be used with -0020-05 through -0140-05 units.
Contact for Pricing

CABINET DRIVE ULTRA LOW HARMONIC, Product Family: ACS800, Horsepower: 450 HP, Output Current: 571 A, Voltage: 480 VAC, Voltage Range: 380-500V, NEMA 1 / UL Type 1 (IP21), Floor-mounted, Local or Remote Mounted LCD Display and Keypad, 0510 KVA, 3-Phase Input, 3-Phase Output, Frame: R8i, Product HxWxD: 91.1 in x 48.4 in x 25.4 in, Product Weight: 2090 lbs
Contact for Pricing

CompleTech
CA420Y+++++
directional yagi - Frequency range: 405-440 MHz - Gain: 13 dBi - Polarization: vertical/horizontal - Connector: N-/ TNC-/ 7/16-female - VSWR: <1.5 - Radome: ABS/FG PU foam - Radiator material: copper - Mounting: 35-60 mm diameter pole - Wind load: 173 N
Contact for Pricing

Externally mounted, half controlled 3-phase field exciter, with single quadrant operation. This field supply is current regulated with a max output current of 35 amps. With 1-phase input, an autotransformer is recommended for voltage adaptation. An input line reactor is required when supply voltage is over 400 Vac. Fuses are always required. DSL communication cable is required. Communication to the converter unit is required via the SDC-DSL-4 board, standard in D5-D7 and all drives 600 Vdc or greater, otherwise optional.
Contact for Pricing
IOL-3300/TRX-1D-13-MM-SC-BIDI-A Transceiver/24V/1xDI/1xDO/TX/RX/MM/SC
Contact for Pricing

Perfect for use in lighting systems, this 300 VAC time delay fuse is designed to handle ballast transformer in-rush currents.
Contact for Pricing
Minimum Qty: 5
Multiplier: 5
*Contact for lower quantities*

WALL-MOUNTED DRIVE ULTRA LOW HARMONIC , Product Family: ACS800, Horsepower: 125 HP, Output Current: 156 A, Voltage: 480 VAC, Voltage Range: 380-500V, NEMA 1 / UL Type 1 (IP21), Wall-mounted, Local or Remote Mounted LCD Display and Keypad, ProfiNet IO Adapter, 3-Phase Input, 3-Phase Output, Frame: R6, Product HxWxD: 38.19 in x 11.81 in x 17.28 in, Product Weight: 221 lbs
Contact for Pricing

MODULE DRIVE 2-QUADRANT (NON-REVERSING), Product Family: DCS800, Horsepower: 1500 HP, Output Current: 1850 A, Voltage: 700 VAC/690 VDC, UL TYPE OPEN (IP00), Mounting: Wall-mount, 3-Phase Input, Frame: D5, Product HxWxD: 37.2 in x 20.1 in x 15.7 in, Product Weight: 240 lbs
Contact for Pricing

ABB - Electrification · ABB
PAM1610
ABB ReliaHome makes homes reliable, with ease. We designed our ReliaHome load centers to be installed as fast as possible – and reliable so your customers can leave a job with confidence. They work seamlessly with all our residential circuit breakers, optimizing your stock.
Contact for Pricing

NSI Industries · Polaris · Polaris Black
IPL3/0-3
The Polaris IPL3/0-3 Multi-Tap Single Side Entry Connector features 3 ports sized for 3/0-6 AWG wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.
Contact for Pricing
Minimum Qty: 6
Multiplier: 6
*Contact for lower quantities*

NSI Industries · Polaris · Polaris Black
IT-250
The Polaris IT-250 Multi-Tap Dual-Side Entry Connector features 2 ports sized for 250 MCM to 6 AWG wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Dual rated for use with copper or aluminum cables. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.
Contact for Pricing
Minimum Qty: 6
Multiplier: 6
*Contact for lower quantities*

NSI Industries · Polaris · Polaris Black
IPLD250-3B
The Polaris IPLD250-3B Multi-Tap Dual-Sided Entry Black Connector features 3 ports sized for 250 MCM - 6 AWG wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each dual-sided port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies, and comes packaged in a clear plastic bag with a mounting hole for hanging in retail displays. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.
Contact for Pricing