Showing 2029-2040 of 452,166 results

Mini-ChangeĀ® C-Size Double-Ended Cordset, 19 Poles, Female (Straight) to Male (Straight), 5.0m Length
Contact for Pricing
Minimum Qty: 4
Multiplier: 1
*Contact for lower quantities*

Contact for Pricing
Minimum Qty: 4
Multiplier: 1
*Contact for lower quantities*

Contact for Pricing
Minimum Qty: 250
Multiplier: 250
*Contact for lower quantities*

Contact for Pricing

NSI Industries Ā· NSI Ā· Miniterms
MTK
NSi Industries Vinyl Insulated 493-Piece Miniterm Kit The NSi Industries Vinyl Insulated 493-Piece Miniterm Kit has been carefully designed to include the most popular NSi miniterm terminals. The cases are made of extremely durable polypropylene. They provide the ultimate in organization and convenience. Miniterms are clearly labeled on the inside lid for easy recognition. Convenient size for easy carrying and easy storing. Refillable and reusable. KIT CONTAINS: Quantity SKU Type Wire Size Stud/Tab Size Length Width 40 R22-6V Vinyl Insulated Ring Terminal 22-18 6 .831 .315 40 R22-10V Vinyl Insulated Ring Terminal 22-18 10 .827 .315 30 R16-6V Vinyl Insulated Ring Terminal 16-14 6 .717 .256 30 R16-10V Vinyl Insulated Ring Terminal 16-14 10 .846 .315 20 R12-8V Vinyl Insulated Ring Terminal 12-10 8 1.063 .374 20 R12-14V Vinyl Insulated Ring Terminal 12-10 1/4 1.201 .472 40 F22-250-3V Vinyl Insulated Female Disconnect 22-18 .250 x.032 - - 35 F16-250-3V Vinyl Insulated Female Disconnect 16-14 .250 x.032 - - 20 F12-250-3V Vinyl Insulated Female Disconnect 12-10 .250 x.032 - - 35 B22-V Vinyl Insulated Butt Connector 22-18 - 1.004 - 25 B16-V Vinyl Insulated Butt Connector 16-14 - 1.004 - 15 B12-V Vinyl Insulated Butt Connector 12-10 - 1.063 - 40 S22-6V Vinyl Insulated Spade Terminal 22-18 6 .896 .224 40 S22-10V Vinyl Insulated Spade Terminal 22-18 10 .906 .378 25 S16-6V Vinyl Insulated Spade Terminal 16-14 6 .839 .252 25 S16-10V Vinyl Insulated Spade Terminal 16-14 10 .846 .315 15 S12-8V Vinyl Insulated Spade Terminal 12-10 8 1.012 .354 12 S12-14V Vinyl Insulated Spade Terminal 12-10 1/4 1.287 .354
Contact for Pricing

NSI Industries Ā· NSI Ā· Polaris Black
ITO-4B
The Polaris ITO-4B Multi-Tap Offset Dual-Side Entry Connector features 2 ports sized for 4 - 14 AWG wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.
Contact for Pricing

NSI Industries Ā· Polaris Ā· Mechanical Connector
2-600L2
2 Port Panelboard Lug 600 MCM - 2 AWG Panelboard style for multi-conductor with NEMA mounting hole spacing for turn prevent and secureness. Made of 6061T-6 aluminum alloy. Electro-tin plated for low contact resistance. For use with copper or aluminum conductors. Rated 600 volts (2000V max per UL486B). UL 486A/B Listed. Temperature rating 90 degrees C. All hole spacing is NEMA standard of 1.750".
Contact for Pricing

Auger Bit, 7/8 in. bit diameter, 8 in. overall length, 7/16 in. shank diameter, Twist flute type, Hex shank type, Steel
Contact for Pricing

ABB - Electrification Ā· ABB
PSR6-600-70
The softstarter PSR6-600-70 has a rated maximum operational current of 6 A with an operating voltage span from 208...600 V AC. The rated control voltage is between 100...240 V AC at 50/60 Hz. PSR features a two-phase control soft start and stop through a voltage ramp. It has built-in bypass for easy installation and energy saving. A RUN signal is available from a relay output in NO (normally open state). The start/stop ramp and time is easy to set by three potentiometers on the front. PSR is often used in combination with a manual motor starter (MMS) from ABB, so mechanical connection kits are available. Another popular option is Fieldbus communication, which can be enabled by an external adaptor and a Fieldbus plug. The PSR range is our most compact softstarters with basic functionality and values. They are suitable for small three-phase motors with nominal currents from 3...105 A and can manage up to 100 starts per hour. Common applications are, for example, pumps, fans, compressors, and conveyors.
Contact for Pricing

Contact for Pricing

Contact for Pricing

Contact for Pricing