This is a ship auger bit with a 1/2" bit diameter and 17" overall length. It is made of steel with a polished finish and a hex shank. The sheet notes it is heat treated and designed for drilling holes in base materials, with features including a self-feeding screw point and side lip.

Ship auger bit with a 1-1/2 in bit diameter and 17 in overall length. Made of steel with a 7/16 in hex shank. The sheet also lists a 12 in twist length and heat treated construction.

An auger bit extension with a double set screw lock. It has a 7/16" bit diameter and 7/16" round shank. The overall length is 9-1/2" and it is made of steel with a polished finish.

This is an auger bit extension with a double set screw lock. It is made of steel with a polished finish. The extension has an overall length of 18" and is for use with a ship auger bit.

Ship auger bit with a 15/16 in bit diameter and 6 in overall length. It is made of steel with a polished finish and a heat treated construction. The bit has a 1/2 in shank diameter, a round shank with 3 flats, and is used for drilling holes in base materials.

This is a ship auger bit with a 13/16 in bit diameter and 6 in overall length. It is made of steel with a polished finish and a heat treated construction. The bit has a 7/16 in hex shank, a 0.500 in shank diameter, and a 4.000 in twist length for drilling holes in base materials.

This is a ship auger bit with a 1" bit diameter and 6" overall length. It is made of steel with a polished finish and a heat-treated construction. The bit has a 7/16" hex shank and a round shank with 3 flats.

A ship auger bit for drilling holes in base materials. It is made of steel with a polished finish and a heat treated cutting design intended to cut through nails and other materials. The bit has a 1-3/8 in diameter, 6.000 in overall length, and a 7/16 in hex impact shank with a 4.000 in twist length.

This is a ship auger bit with a 1-1/4 in bit diameter and 6 in overall length. It is made of steel with a polished finish and a round shank with 3 flats. The bit has a 7/16 in hex shank, 4 in twist length, and is described as heat treated for cutting through nails and other materials.

Fishbit Steering Guide for drilling behind a wall or other hard-to-reach locations. It is made of steel with no additional finish. The shank diameter is 1/4 inch.

This is a 5/8 in. ship auger bit with a 6 in. overall length and a hex shank. It is made of steel with a polished finish and is heat treated for cutting through nails and other materials. The bit has a 4 in. twist length and a round shank with 3 flats.

A ship auger bit with a self-feed screw point for fast, effortless boring. It is made of steel with a polished finish and is described as super strong heat treated steel that cuts through nails and other materials. The bit has an 11/16 in diameter, 6.000 in overall length, and a 0.500 in shank diameter.