All Categories

Electrical Systems and Lighting and Components and Accessories and Supplies

Electrical Wire Management Devices And Accessories And Supplies

Wire Raceways Conduit and Busways

Subcategories

    Busway

    Busway Fitting And Accessories

    Cable Handler

    Cable Ladder

    Cable Tray

    Cable Tray Fitting And Accessories

    Electrical Conduit

    Electrical Conduit Coupling

    Electrical Conduit Elbow

    Electrical Conduit Fitting Body

    Electrical Conduit Nipple

    Electrical Wire Or Cable Raceway

    Wireway

    Wireway Fitting And Accessories

    Wiring Duct

    Wiring Duct Fitting And Accessories

    Wiring Trough

Showing 2869-2880 of 19,233 results

Panduit WGSW4BL - The Wyr-Grid Snap-On Sidewall Bracket is used in cable routing systems to retain cables and can be attached anywhere along the pathway. The 4 inch snap-on sidewall bracket is 6.9 inches H x 1.2 inches L x 3.71 inches W (175.3mm x 30.5mm x 94.2mm).
Panduit

WGSW4BL


The Wyr-Grid Snap-On Sidewall Bracket is used in cable routing systems to retain cables and can be attached anywhere along the pathway. The 4 inch snap-on sidewall bracket is 6.9 inches H x 1.2 inches L x 3.71 inches W (175.3mm x 30.5mm x 94.2mm).

Contact for Pricing

ABB - Electrification TCU30 - Universal Raintight Hub: 3" Diameter
ABB - Electrification · GE

TCU30


Universal Raintight Hub: 3" Diameter

Contact for Pricing

Panduit FR12TB2412 - Used to support the 12x4 system by spanning two threaded rod drops that are 24in apart. Ideal for supporting trapeze bracket from 24in wide ladder rack or 24in wide cable tray. Can be installed from above or below. Bracket is secured to each threaded rod with two nuts. The pre-assembled slide clamps enable fast assembly to channel. Use 7/16in nut driver on slide clamps, For 1/2in threaded rod.
Panduit

FR12TB2412


Used to support the 12x4 system by spanning two threaded rod drops that are 24in apart. Ideal for supporting trapeze bracket from 24in wide ladder rack or 24in wide cable tray. Can be installed from above or below. Bracket is secured to each threaded rod with two nuts. The pre-assembled slide clamps enable fast assembly to channel. Use 7/16in nut driver on slide clamps, For 1/2in threaded rod.

Contact for Pricing

Panduit DRD44LG6 - The DRD44LG6 Panduct PanelMax DIN Rail Wiring Duct is a wire management solution that positions DIN rail and components off the panel directly above an integrated wire management channel for up to a 30% smaller footprint; up to 25% material cost savings; and up to 50% faster installation. Compatible with common DIN rail/mount components. Lead-free PVC. 4.12" (104.8 mm) x 8.23" (209 mm) and 6' (1.8 m) long. Includes base, covers, and DIN rail fasteners. Color Light Gray.
Panduit

DRD44LG6


The DRD44LG6 Panduct PanelMax DIN Rail Wiring Duct is a wire management solution that positions DIN rail and components off the panel directly above an integrated wire management channel for up to a 30% smaller footprint; up to 25% material cost savings; and up to 50% faster installation. Compatible with common DIN rail/mount components. Lead-free PVC. 4.12" (104.8 mm) x 8.23" (209 mm) and 6' (1.8 m) long. Includes base, covers, and DIN rail fasteners. Color Light Gray.

Contact for Pricing

Minimum Qty: 6

Multiplier: 6

*Contact for lower quantities*

Panduit JBP1FSEI - The single gang power rated two-piece snap together outlet box accepts Pan-Way Snap-On Faceplates. For use with Pan-Way T-45 or LD, LDP, LDPH, LDS profile raceways. 5.00"L x 3.26"W x 1.62"H (127.1mm x 82.7mm x 41.1mm). Breakouts for 1/2", 3/4", or 1" diameter conduit, Electric Ivory.
Panduit

JBP1FSEI


The single gang power rated two-piece snap together outlet box accepts Pan-Way Snap-On Faceplates. For use with Pan-Way T-45 or LD, LDP, LDPH, LDS profile raceways. 5.00"L x 3.26"W x 1.62"H (127.1mm x 82.7mm x 41.1mm). Breakouts for 1/2", 3/4", or 1" diameter conduit, Electric Ivory.

Contact for Pricing

Minimum Qty: 10

Multiplier: 1

*Contact for lower quantities*

Panduit FRSPJ2X2BL - The FiberRunner 2x2 Spill-Over Junction Fitting is used in cable routing systems. It assembles onto 4x4, 6x4, 12x4, or 24x4 FiberRunner Channels. It mounts directly to the existing installation with no alteration required. The spill-over junction fitting includes mounting hardware.
Panduit

FRSPJ2X2BL


The FiberRunner 2x2 Spill-Over Junction Fitting is used in cable routing systems. It assembles onto 4x4, 6x4, 12x4, or 24x4 FiberRunner Channels. It mounts directly to the existing installation with no alteration required. The spill-over junction fitting includes mounting hardware.

Contact for Pricing

Panduit T70PWH - The snap-on single gang 106 duplex electrical/communication faceplate is used to cover one NEMA standard 106 duplex electrical outlet. In communication applications, covers one standard 106 duplex communication module frame, White.
Panduit

T70PWH


The snap-on single gang 106 duplex electrical/communication faceplate is used to cover one NEMA standard 106 duplex electrical outlet. In communication applications, covers one standard 106 duplex communication module frame, White.

Contact for Pricing

Minimum Qty: 10

Multiplier: 1

*Contact for lower quantities*

Panduit T70CEI8 - The T-70 Power Rated Raceway Cover is designed to snap on to the base to create a tamper resistant cable routing solution along perimeter walls. It is 8 ft and Electric Ivory
Panduit

T70CEI8


The T-70 Power Rated Raceway Cover is designed to snap on to the base to create a tamper resistant cable routing solution along perimeter walls. It is 8 ft and Electric Ivory

Contact for Pricing

Minimum Qty: 96

Multiplier: 96

*Contact for lower quantities*

Panduit T702BWH10 - Twin-70 raceway base, 10 foot length. Supplied with pre-punched mounting holes. 2' of cover needed for every 1' of Twin-70 base.
Panduit

T702BWH10


Twin-70 raceway base, 10 foot length. Supplied with pre-punched mounting holes. 2' of cover needed for every 1' of Twin-70 base.

Contact for Pricing

Minimum Qty: 30

Multiplier: 30

*Contact for lower quantities*

Panduit MC25X50IG2 - The MC25X50IG2 Panduct Lead-Free PVC Narrow Slot Wiring Duct is 24.6 mm x 47.8 mm (0.97" x 1.88"). It features a narrow slot/finger design that closely matches the spacing of high-density components. Upper and lower scorelines allow for easy finger/sidewall section removal. UL 94 flame class of V-0 with a UL recognized continuous-use temperature up to 122 F (50 C). Mounting holes provided. Lead-free PVC. Cover included. Color - International Gray. 20 Meters (10 sticks each) - Bases & Covers per package.
Panduit

MC25X50IG2


The MC25X50IG2 Panduct Lead-Free PVC Narrow Slot Wiring Duct is 24.6 mm x 47.8 mm (0.97" x 1.88"). It features a narrow slot/finger design that closely matches the spacing of high-density components. Upper and lower scorelines allow for easy finger/sidewall section removal. UL 94 flame class of V-0 with a UL recognized continuous-use temperature up to 122 F (50 C). Mounting holes provided. Lead-free PVC. Cover included. Color - International Gray. 20 Meters (10 sticks each) - Bases & Covers per package.

Contact for Pricing

Minimum Qty: 20

Multiplier: 20

*Contact for lower quantities*

Panduit LDPH3EI6-A - The LDPH3 power rated Surface Raceway is a two-piece latching raceway with cover suitable for applications up to 600 V. It features pre-punched mounting holes and factory-applied adhesive backing for fast mounting. It is 6 feet in length and is 0.75 inches wide by 0.41 inches deep. It meets TIA/EIA Standards, is UL5A Listed, and is UL Compliant. It is Electric Ivory.
Panduit

LDPH3EI6-A


The LDPH3 power rated Surface Raceway is a two-piece latching raceway with cover suitable for applications up to 600 V. It features pre-punched mounting holes and factory-applied adhesive backing for fast mounting. It is 6 feet in length and is 0.75 inches wide by 0.41 inches deep. It meets TIA/EIA Standards, is UL5A Listed, and is UL Compliant. It is Electric Ivory.

Contact for Pricing

Minimum Qty: 120

Multiplier: 6

*Contact for lower quantities*

Panduit LDPH3IW8-A - The LDPH3 power rated Surface Raceway is a two-piece latching raceway with cover suitable for applications up to 600 V. It features pre-punched mounting holes and factory-applied adhesive backing for fast mounting. It is 8 feet in length and is 0.75 inches wide by 0.41 inches deep. It meets TIA/EIA Standards, is UL5A Listed, and is UL Compliant. It is Off White.
Panduit

LDPH3IW8-A


The LDPH3 power rated Surface Raceway is a two-piece latching raceway with cover suitable for applications up to 600 V. It features pre-punched mounting holes and factory-applied adhesive backing for fast mounting. It is 8 feet in length and is 0.75 inches wide by 0.41 inches deep. It meets TIA/EIA Standards, is UL5A Listed, and is UL Compliant. It is Off White.

Contact for Pricing

Minimum Qty: 160

Multiplier: 160

*Contact for lower quantities*

Showing 2869-2880 of 19,233 results