All Categories

Electrical Systems and Lighting and Components and Accessories and Supplies

Electrical Wire Management Devices And Accessories And Supplies

Wire Raceways Conduit and Busways

Subcategories

    Busway

    Busway Fitting And Accessories

    Cable Handler

    Cable Ladder

    Cable Tray

    Cable Tray Fitting And Accessories

    Electrical Conduit

    Electrical Conduit Coupling

    Electrical Conduit Elbow

    Electrical Conduit Fitting Body

    Electrical Conduit Nipple

    Electrical Wire Or Cable Raceway

    Wireway

    Wireway Fitting And Accessories

    Wiring Duct

    Wiring Duct Fitting And Accessories

    Wiring Trough

Showing 2845-2856 of 19,233 results

Panduit FRT4X4YL - The FiberRunner 4x4 Horizontal Tee attaches to the 4x4 channel and/or fittings to create a 90 horizontal branch from a straight horizontal run.
Panduit

FRT4X4YL


The FiberRunner 4x4 Horizontal Tee attaches to the 4x4 channel and/or fittings to create a 90 horizontal branch from a straight horizontal run.

Contact for Pricing

Panduit FRFWCSC4YL - Optional split cover for the four way cross fitting FRFWC4X4YL. Snap-on feature allows cover to be installed and removed with no tools required. Creates radiused 3/4 (19mm) opening for easy access to add or remove cables.
Panduit

FRFWCSC4YL


Optional split cover for the four way cross fitting FRFWC4X4YL. Snap-on feature allows cover to be installed and removed with no tools required. Creates radiused 3/4 (19mm) opening for easy access to add or remove cables.

Contact for Pricing

Panduit DCF5EI-X - The drop ceiling/entrance end fitting allows for running cable directly from the ceiling. It is designed to be used with the LD5 Surface raceway. It meets TIA/EIA, used in applications up to 50 V. It features a snap-on installation, is made of ABS plastic, and is Electric Ivory.
Panduit

DCF5EI-X


The drop ceiling/entrance end fitting allows for running cable directly from the ceiling. It is designed to be used with the LD5 Surface raceway. It meets TIA/EIA, used in applications up to 50 V. It features a snap-on installation, is made of ABS plastic, and is Electric Ivory.

Contact for Pricing

Minimum Qty: 50

Multiplier: 10

*Contact for lower quantities*

Panduit ECF10WH-X - The end cap fitting allows for closing off one end of the Surface Raceway when you no longer need to run cables. It is designed to be used with the LD10 Surface raceway. It meets TIA/EIA, used in applications up to 50 V. It features a snap-on installation, is made of ABS plastic, and is White.
Panduit

ECF10WH-X


The end cap fitting allows for closing off one end of the Surface Raceway when you no longer need to run cables. It is designed to be used with the LD10 Surface raceway. It meets TIA/EIA, used in applications up to 50 V. It features a snap-on installation, is made of ABS plastic, and is White.

Contact for Pricing

Minimum Qty: 50

Multiplier: 10

*Contact for lower quantities*

Panduit DCF10WH-X - The drop ceiling/entrance end fitting allows for running cable directly from the ceiling. It is designed to be used with the LD10 Surface raceway. It meets TIA/EIA, used in applications up to 50 V. It features a snap-on installation, is made of ABS plastic, and is White.
Panduit

DCF10WH-X


The drop ceiling/entrance end fitting allows for running cable directly from the ceiling. It is designed to be used with the LD10 Surface raceway. It meets TIA/EIA, used in applications up to 50 V. It features a snap-on installation, is made of ABS plastic, and is White.

Contact for Pricing

Minimum Qty: 50

Multiplier: 10

*Contact for lower quantities*

Panduit CF10IG-X - The coupler fitting is used to efficiently manage cable placement. It is designed to be used with LD10 Surface Raceway and is a 2 inch length. It meets TIA/EIA, used in applications up to 50 V. It features a snap-on installation, is made of ABS plastic, and is International Gray.
Panduit

CF10IG-X


The coupler fitting is used to efficiently manage cable placement. It is designed to be used with LD10 Surface Raceway and is a 2 inch length. It meets TIA/EIA, used in applications up to 50 V. It features a snap-on installation, is made of ABS plastic, and is International Gray.

Contact for Pricing

Minimum Qty: 50

Multiplier: 10

*Contact for lower quantities*

Panduit FR12TB58 - Used to support the 12x4 system by spanning two threaded rod drops that are 18in apart. Can be installed from above or below. Bracket is secured to each threaded rod with two nuts. The pre-assembled slide clamps enable fast assembly to channel. Use 7/16in nut driver on slide clamps, For 5/8in threaded rod.
Panduit

FR12TB58


Used to support the 12x4 system by spanning two threaded rod drops that are 18in apart. Can be installed from above or below. Bracket is secured to each threaded rod with two nuts. The pre-assembled slide clamps enable fast assembly to channel. Use 7/16in nut driver on slide clamps, For 5/8in threaded rod.

Contact for Pricing

Panduit FR12TB12 - The FiberRunner QuikLock Trapeze Bracket is used to support the 12x4 system by spanning two threaded rod drops that are 18 inches apart. It can be installed from above or below. It is used for a 0.5 inch threaded rod. The QuikLock Trapeze Bracket is secured to each threaded rod with two nuts. The pre-assembled slide clamps enable fast assembly to the channel.
Panduit

FR12TB12


The FiberRunner QuikLock Trapeze Bracket is used to support the 12x4 system by spanning two threaded rod drops that are 18 inches apart. It can be installed from above or below. It is used for a 0.5 inch threaded rod. The QuikLock Trapeze Bracket is secured to each threaded rod with two nuts. The pre-assembled slide clamps enable fast assembly to the channel.

Contact for Pricing

Minimum Qty: 10

Multiplier: 1

*Contact for lower quantities*

Panduit RAF3IW-E - The right angle fitting is a one-piece Surface Raceway fitting designed to transition your raceway around a corner while maintaining a 1" bend radius. It is made to be used with the LD3 raceway, in applications up to 50 V. It is a snap-on installation and measures 1.82 in length. It is constructed with ABS plastic, meets TIA/EIA, and is Off White.
Panduit

RAF3IW-E


The right angle fitting is a one-piece Surface Raceway fitting designed to transition your raceway around a corner while maintaining a 1" bend radius. It is made to be used with the LD3 raceway, in applications up to 50 V. It is a snap-on installation and measures 1.82 in length. It is constructed with ABS plastic, meets TIA/EIA, and is Off White.

Contact for Pricing

Minimum Qty: 100

Multiplier: 20

*Contact for lower quantities*

Panduit T45HEGBEI - The T-45 Electrical Bracket allows for one electrical outlet. Rectangular cut out and is Electric Ivory.
Panduit

T45HEGBEI


The T-45 Electrical Bracket allows for one electrical outlet. Rectangular cut out and is Electric Ivory.

Contact for Pricing

Minimum Qty: 10

Multiplier: 1

*Contact for lower quantities*

Panduit F1X3WH6-A - The F1X2WH6-A Panduct Lead-Free PVC Narrow Slot Adhesive Wiring Duct features a narrow slot/finger design that closely matches the spacing of high-density components. Upper and lower scorelines allow for easy finger/sidewall section removal. UL 94 flame class of V-0 with a UL recognized continuous-use temperature up to 122 F (50 C). Mounting holes provided. Lead-free PVC. 1" x 3" (25.4 mm x 76.2 mm) and 6' (1.83 m) long. Cover sold separately. Color White.
Panduit

F1X3WH6-A


The F1X2WH6-A Panduct Lead-Free PVC Narrow Slot Adhesive Wiring Duct features a narrow slot/finger design that closely matches the spacing of high-density components. Upper and lower scorelines allow for easy finger/sidewall section removal. UL 94 flame class of V-0 with a UL recognized continuous-use temperature up to 122 F (50 C). Mounting holes provided. Lead-free PVC. 1" x 3" (25.4 mm x 76.2 mm) and 6' (1.83 m) long. Cover sold separately. Color White.

Contact for Pricing

Minimum Qty: 120

Multiplier: 120

*Contact for lower quantities*

Panduit F1.5X3WH6-A - The F1.5X3WH6-A Panduct Lead-Free PVC Narrow Slot Adhesive Wiring Duct features a narrow slot/finger design that closely matches the spacing of high-density components. Upper and lower scorelines allow for easy finger/sidewall section removal. UL 94 flame class of V-0 with a UL recognized continuous-use temperature up to 122 F (50 C). Mounting holes provided. Lead-free PVC. 1.5" x 3" (38.1 mm x 76.2 mm) and 6' (1.83 m) long. Cover sold separately. Color White.

The F1.5X3WH6-A Panduct Lead-Free PVC Narrow Slot Adhesive Wiring Duct features a narrow slot/finger design that closely matches the spacing of high-density components. Upper and lower scorelines allow for easy finger/sidewall section removal. UL 94 flame class of V-0 with a UL recognized continuous-use temperature up to 122 F (50 C). Mounting holes provided. Lead-free PVC. 1.5" x 3" (38.1 mm x 76.2 mm) and 6' (1.83 m) long. Cover sold separately. Color White.

Contact for Pricing

Minimum Qty: 120

Multiplier: 120

*Contact for lower quantities*

Showing 2845-2856 of 19,233 results