Showing 2041-2052 of 19,233 results

Contact for Pricing
Minimum Qty: 5
Multiplier: 5
*Contact for lower quantities*

Contact for Pricing
Minimum Qty: 25
Multiplier: 25
*Contact for lower quantities*

NSI Industries · Bridgeport
LB-40CG
EMT Conduit Body, Type LB, Set Screw, Aluminum, Size 4 Inch w/Cover and Gasket
Contact for Pricing

NSI Industries · Bridgeport
LB-38CG
EMT Conduit Body, Type LB, Set Screw, Aluminum, Size 3 Inch w/Cover and Gasket
Contact for Pricing

Contact for Pricing
Minimum Qty: 25
Multiplier: 25
*Contact for lower quantities*

Panduit
FR12TB2412
Used to support the 12x4 system by spanning two threaded rod drops that are 24in apart. Ideal for supporting trapeze bracket from 24in wide ladder rack or 24in wide cable tray. Can be installed from above or below. Bracket is secured to each threaded rod with two nuts. The pre-assembled slide clamps enable fast assembly to channel. Use 7/16in nut driver on slide clamps, For 1/2in threaded rod.
Contact for Pricing

Panduit
DRD44LG6
The DRD44LG6 Panduct PanelMax DIN Rail Wiring Duct is a wire management solution that positions DIN rail and components off the panel directly above an integrated wire management channel for up to a 30% smaller footprint; up to 25% material cost savings; and up to 50% faster installation. Compatible with common DIN rail/mount components. Lead-free PVC. 4.12" (104.8 mm) x 8.23" (209 mm) and 6' (1.8 m) long. Includes base, covers, and DIN rail fasteners. Color Light Gray.
Contact for Pricing
Minimum Qty: 6
Multiplier: 6
*Contact for lower quantities*

Panduit
JBP1FSEI
The single gang power rated two-piece snap together outlet box accepts Pan-Way Snap-On Faceplates. For use with Pan-Way T-45 or LD, LDP, LDPH, LDS profile raceways. 5.00"L x 3.26"W x 1.62"H (127.1mm x 82.7mm x 41.1mm). Breakouts for 1/2", 3/4", or 1" diameter conduit, Electric Ivory.
Contact for Pricing
Minimum Qty: 10
Multiplier: 1
*Contact for lower quantities*

Panduit
FRSPJ2X2BL
The FiberRunner 2x2 Spill-Over Junction Fitting is used in cable routing systems. It assembles onto 4x4, 6x4, 12x4, or 24x4 FiberRunner Channels. It mounts directly to the existing installation with no alteration required. The spill-over junction fitting includes mounting hardware.
Contact for Pricing

Panduit
WGWMTB1830BL
The black powder coated wall bracket is 2.44" (61.98 mm) high, 6.05" (153.67 mm), long, 3.12" (79.25 mm) wide, and 6.05" (153.67 mm) deep. It is used to support the end of the 18" (457.2 mm), 24" (609.6 mm), or 30" (762 mm) Wyr-Grid Pathway against a wall. The package contains two components that are required to support the wider pathway sections. The mounting hardware for attaching the bracket to the wall is not included. The wall mount bracket comes in standard packages of one.
Contact for Pricing

Panduit
WGHRDWKTBL
The Wyr-Grid Hardware Kit is used to quickly and easily bend the straight Wyr-Grid Pathway into a wide-radius 90-degree angle. The 12in (305mm) pathway requires 6 kits, the 18in (457mm) pathway requires 9 kits, the 24in (610mm) pathway requires 12 kits, and the 30in (762mm) pathway requires 15 kits. Black powder coated, 1pc.
Contact for Pricing

Panduit
FRTBWG30BL
FiberRunner QuikLock Threaded Rod Trapeze Bracket for Wyr-Grid 30" (762mm) width. Used to support FiberRunner 4x4, 6x4, 12x4, and 24x4 Channel above or below the Wyr-Grid 30" Pathway using the same 1/2" or 12mm threaded rod used to support the WGTB30BL bracket. Quick mount clips, FRQMC24-X are not included for installing the 24x4 channel. These must be purchased separately. Hardware for attaching to threaded rod sold separately. Available in black powder coat only.
Contact for Pricing
Minimum Qty: 10
Multiplier: 1
*Contact for lower quantities*