Showing 1609-1620 of 19,233 results

Panduit
D2X2LG6
The D2X2LG6 Panduct Lead-Free PVC Round Hole Wiring Duct is designed with multiple rows of holes to retain and support wire at variable heights and positions. UL 94 flame class of V-0 with a UL recognized continuous-use temperature up to 122 F (50 C). Mounting holes provided. Lead-free PVC. 2" x 2" (50.8 mm x 50.8 mm) and 6' (1.83 m) long. Cover sold separately. Color Light Gray.
Contact for Pricing
Minimum Qty: 120
Multiplier: 120
*Contact for lower quantities*

Panduit
FRHC12YL2
The FiberRunner Snap-On Hinged Cover is designed to be used in a cable routing system that uses the 12x4 channel. This snap-on hinged cover features a hinge that enables the positioning of the cover at angles between 30 and 90 .
Contact for Pricing
Minimum Qty: 4
Multiplier: 4
*Contact for lower quantities*

Panduit
FRT12X4OR
Attaches to 12x4 channel and/or fittings to create a 90 horizontal branch with a 12x4 exit from straight horizontal run. Accepts optional split cover FRTSC12OR.
Contact for Pricing

Panduit
FRTR4X4YL
The FiberRunner 3-Sided Trumpet Spillout is used in cable routing systems to limit the bend radius of the cable to 2 inches (50.8mm) when exiting from the 4x4 channel or horizontal tee.
Contact for Pricing

Panduit
ECF5WH-E
The end cap fitting allows for closing off one end of the Surface Raceway when you no longer need to run cables. It is designed to be used with the LD5 Surface raceway. It meets TIA/EIA, used in applications up to 50 V. It features a snap-on installation, is made of ABS plastic, and is White.
Contact for Pricing
Minimum Qty: 100
Multiplier: 20
*Contact for lower quantities*

Panduit
RAF5EI-E
The right angle fitting is a one-piece Surface Raceway fitting designed to transition your raceway around a corner while maintaining a 1" bend radius. It is made to be used with the LD5 raceway, in applications up to 50 V. It is a snap-on installation and measures 2.5 in length. It is constructed with ABS plastic, meets TIA/EIA, and is Electric Ivory.
Contact for Pricing
Minimum Qty: 100
Multiplier: 20
*Contact for lower quantities*

Panduit
ICF5EI-E
The inside corner fitting is used to efficiently run cables along an inside corner. It has a 90 angle and is designed to be used with the LD5 or LDPH5 raceway and features a snap-on installation. Electric Ivory.
Contact for Pricing
Minimum Qty: 100
Multiplier: 20
*Contact for lower quantities*

Panduit
OCF5EI-E
The outside corner fitting is a Surface Raceway fitting designed to transition your raceway around an outside corner while maintaining a 1 inch bend radius. It is designed to be used with the LD5 raceway and features a snap-on installation. . It meets TIA/EIA Standards, is UL Listed and Compliant. It is Electric Ivory.
Contact for Pricing
Minimum Qty: 100
Multiplier: 20
*Contact for lower quantities*

Panduit
RAF10EI-X
The right angle fitting is a one-piece Surface Raceway fitting designed to transition your raceway around a corner while maintaining a 1" bend radius. It is made to be used with the LD10 raceway, in applications up to 50 V. It is a snap-on installation and measures 2.5 in length. It is constructed with ABS plastic, meets TIA/EIA, and is Electric Ivory.
Contact for Pricing
Minimum Qty: 50
Multiplier: 10
*Contact for lower quantities*

Panduit
OCF3EI-E
The outside corner fitting is a Surface Raceway fitting designed to transition your raceway around an outside corner while maintaining a 1 inch bend radius. It is designed to be used with the LD3 raceway and features a snap-on installation. It meets TIA/EIA, used in applications up to 50 V, and is Electric Ivory.
Contact for Pricing
Minimum Qty: 100
Multiplier: 20
*Contact for lower quantities*

Panduit
DCF10EI-X
The drop ceiling/entrance end fitting allows for running cable directly from the ceiling. It is designed to be used with the LD10 Surface raceway. It meets TIA/EIA, used in applications up to 50 V. It features a snap-on installation, is made of ABS plastic, and is Electric Ivory.
Contact for Pricing
Minimum Qty: 50
Multiplier: 10
*Contact for lower quantities*

Panduit
ECF10IG-X
The end cap fitting allows for closing off one end of the Surface Raceway when you no longer need to run cables. It is designed to be used with the LD10 Surface raceway. It meets TIA/EIA, used in applications up to 50 V. It features a snap-on installation, is made of ABS plastic, and is International Gray.
Contact for Pricing
Minimum Qty: 50
Multiplier: 10
*Contact for lower quantities*