All Categories

Electrical Systems and Lighting and Components and Accessories and Supplies

Electrical Wire Management Devices And Accessories And Supplies

Wire Raceways Conduit and Busways

Subcategories

    Busway

    Busway Fitting And Accessories

    Cable Handler

    Cable Ladder

    Cable Tray

    Cable Tray Fitting And Accessories

    Electrical Conduit

    Electrical Conduit Coupling

    Electrical Conduit Elbow

    Electrical Conduit Fitting Body

    Electrical Conduit Nipple

    Electrical Wire Or Cable Raceway

    Wireway

    Wireway Fitting And Accessories

    Wiring Duct

    Wiring Duct Fitting And Accessories

    Wiring Trough

Showing 1237-1248 of 19,233 results

Panduit FIVRA2X2LYL - The FiberRunner 2x2 Inside Vertical attaches to a channel to create a 90 upward angle from a straight horizontal run. It is used with outside vertical 90 angle fitting FOVRA2X2LYL to change level of a straight horizontal run.
Panduit

FIVRA2X2LYL


The FiberRunner 2x2 Inside Vertical attaches to a channel to create a 90 upward angle from a straight horizontal run. It is used with outside vertical 90 angle fitting FOVRA2X2LYL to change level of a straight horizontal run.

Contact for Pricing

Panduit FRH4524X4LYL - The FiberRunner 24x4 Horizontal Fitting attaches to a 24x4 channel and/or fittings to create a 45 horizontal turn from a straight horizontal run.

The FiberRunner 24x4 Horizontal Fitting attaches to a 24x4 channel and/or fittings to create a 45 horizontal turn from a straight horizontal run.

Contact for Pricing

Minimum Qty: 5

Multiplier: 1

*Contact for lower quantities*

Panduit FRIDT6X4LYL - The FiberRunner 3-Port Spillout is used with a 6x4 fitting. The spillout is used to route cable into three separate 1.5 inch (3.8mm) diameter split corrugated tubing.

The FiberRunner 3-Port Spillout is used with a 6x4 fitting. The spillout is used to route cable into three separate 1.5 inch (3.8mm) diameter split corrugated tubing.

Contact for Pricing

Minimum Qty: 5

Multiplier: 1

*Contact for lower quantities*

Panduit FRSTRCBL - The Strut Clip Kit allows the FiberRunner Channel or Wyr-Grid Pathway to be attached directly to a standard 1.625 inch W strut structure. The kit contains two clips the hardware for assembly.
Panduit

FRSTRCBL


The Strut Clip Kit allows the FiberRunner Channel or Wyr-Grid Pathway to be attached directly to a standard 1.625 inch W strut structure. The kit contains two clips the hardware for assembly.

Contact for Pricing

Panduit T70BEI8 - The T-70 raceway Base provides solutions for routing low voltage, fiber optic, and/or power cabling along perimeter walls. The T-70 raceway is supplied with pre-punched mounting holes and is tamper resistant. It is 8 ft and Electric Ivory.
Panduit

T70BEI8


The T-70 raceway Base provides solutions for routing low voltage, fiber optic, and/or power cabling along perimeter walls. The T-70 raceway is supplied with pre-punched mounting holes and is tamper resistant. It is 8 ft and Electric Ivory.

Contact for Pricing

Minimum Qty: 48

Multiplier: 48

*Contact for lower quantities*

Panduit LDPH10EI8-A - The LDPH10 power rated Surface Raceway is a two-piece latching raceway with cover suitable for applications up to 600 V. It features pre-punched mounting holes and factory-applied adhesive backing for fast mounting. It is 8 feet in length and is 1.52 inches wide by 0.86 inches deep. It meets TIA/EIA Standards, is UL5A Listed, and is UL Compliant. It is Electric Ivory.

The LDPH10 power rated Surface Raceway is a two-piece latching raceway with cover suitable for applications up to 600 V. It features pre-punched mounting holes and factory-applied adhesive backing for fast mounting. It is 8 feet in length and is 1.52 inches wide by 0.86 inches deep. It meets TIA/EIA Standards, is UL5A Listed, and is UL Compliant. It is Electric Ivory.

Contact for Pricing

Minimum Qty: 160

Multiplier: 160

*Contact for lower quantities*

Panduit LDPH3WH10-A - The LDPH3 power rated Surface Raceway is a two-piece latching raceway with cover suitable for applications up to 600 V. It features pre-punched mounting holes and factory-applied adhesive backing for fast mounting. It is 10 feet in length and is 0.75 inches wide by 0.41 inches deep. It meets TIA/EIA Standards, is UL5A Listed, and is UL Compliant. It is White.

The LDPH3 power rated Surface Raceway is a two-piece latching raceway with cover suitable for applications up to 600 V. It features pre-punched mounting holes and factory-applied adhesive backing for fast mounting. It is 10 feet in length and is 0.75 inches wide by 0.41 inches deep. It meets TIA/EIA Standards, is UL5A Listed, and is UL Compliant. It is White.

Contact for Pricing

Minimum Qty: 200

Multiplier: 200

*Contact for lower quantities*

Panduit LDPH10IW8-A - The LDPH10 power rated Surface Raceway is a two-piece latching raceway with cover suitable for applications up to 600 V. It features pre-punched mounting holes and factory-applied adhesive backing for fast mounting. It is 8 feet in length and is 1.52 inches wide by 0.86 inches deep. It meets TIA/EIA Standards, is UL5A Listed, and is UL Compliant. It is Off White.

The LDPH10 power rated Surface Raceway is a two-piece latching raceway with cover suitable for applications up to 600 V. It features pre-punched mounting holes and factory-applied adhesive backing for fast mounting. It is 8 feet in length and is 1.52 inches wide by 0.86 inches deep. It meets TIA/EIA Standards, is UL5A Listed, and is UL Compliant. It is Off White.

Contact for Pricing

Minimum Qty: 160

Multiplier: 160

*Contact for lower quantities*

Panduit LDPH10WH8-A - The LDPH10 power rated Surface Raceway is a two-piece latching raceway with cover suitable for applications up to 600 V. It features pre-punched mounting holes and factory-applied adhesive backing for fast mounting. It is 8 feet in length and is 1.52 inches wide by 0.86 inches deep. It meets TIA/EIA Standards, is UL5A Listed, and is UL Compliant. It is White.

The LDPH10 power rated Surface Raceway is a two-piece latching raceway with cover suitable for applications up to 600 V. It features pre-punched mounting holes and factory-applied adhesive backing for fast mounting. It is 8 feet in length and is 1.52 inches wide by 0.86 inches deep. It meets TIA/EIA Standards, is UL5A Listed, and is UL Compliant. It is White.

Contact for Pricing

Minimum Qty: 160

Multiplier: 160

*Contact for lower quantities*

Panduit H3X4WH6 - The H3X4WH6 PVC Hinged-Cover Wide Slot Wiring Duct features a hinged cover and wide finger/slot design that provides greater rigidity and allows for use with a range of wire/bundle sizes. Upper and lower scorelines allow for easy finger/sidewall section removal. UL 94 flame class of V-0 with UL recognized continuous-use temperature up to 122 F (50 C). Mounting holes provided. Lead-Free PVC. 4" x 3.25" (101.6mm x 82.6mm) and 6' (1.83m) long. Cover sold separately. White.
Panduit

H3X4WH6


The H3X4WH6 PVC Hinged-Cover Wide Slot Wiring Duct features a hinged cover and wide finger/slot design that provides greater rigidity and allows for use with a range of wire/bundle sizes. Upper and lower scorelines allow for easy finger/sidewall section removal. UL 94 flame class of V-0 with UL recognized continuous-use temperature up to 122 F (50 C). Mounting holes provided. Lead-Free PVC. 4" x 3.25" (101.6mm x 82.6mm) and 6' (1.83m) long. Cover sold separately. White.

Contact for Pricing

Minimum Qty: 6

Multiplier: 6

*Contact for lower quantities*

Panduit HS1.5X2LG6NM - Solid hinged duct, 1.5 W x 2 H, 6' length, PVC, light gray, no mounting holes.

Solid hinged duct, 1.5 W x 2 H, 6' length, PVC, light gray, no mounting holes.

Contact for Pricing

Minimum Qty: 6

Multiplier: 6

*Contact for lower quantities*

ABB - Electrification TMPCCVR03 - REPLACEMNT WIREWAY (C) COVR
ABB - Electrification · GE · GE Industrial Solution

TMPCCVR03


REPLACEMNT WIREWAY (C) COVR

Contact for Pricing

Showing 1237-1248 of 19,233 results