All Categories

Electrical Systems and Lighting and Components and Accessories and Supplies

Electrical Equipment, Components, and Supplies

Electrical Lugs Plugs And Connectors

Subcategories

    Automatic Wire Or Cable Connector

    Backshell connectors

    Battery Terminal

    Cable Gland Connector

    Cable Joint

    Cable Or Wire Lug

    Circular Connectors

    Coaxial Connectors

    Connecting Leads or Wires

    Connector And Cable Seal

    Crab Joint

    Electrical Connector Assembly

    Electrical Extension Cable

    Electrical Metallic Tubing Emt Connectors

    Electrical Metallic Tubing Emt Elbow

    Electrical plug/receptacle adapter

    Electrical Plugs

    Electrical Receptacles

    Electrical Sleeves

    Electrical Taps

    Electrical Terminals

    Electrical Underground Bus Connector

    Electrodes

    Electronic Connector Caps

    Flex Connectors

    Flexible Braid

    Heavy Duty Connector Hood & Housing

    Heavy Duty Connector Insert & Contact

    Input Output Connector Cover

    Jack for Plug

    Jumper Bar

    Liquid Tight Connectors

    Locking Plug

    Mechanical Connector Lug and Cap

    Mechanical Connectors

    Panel Interface Connector

    Power Distribution Blocks

    Printed Circuit Board Pcb Press Fit Header Connector

    Rj Jack And Module

    Tap Off

    Telecommunication Connector

    Terminal Block Accessories

    Terminal Block Covers

    Terminal Block Markers and Marking Accessories

    Terminal Block Separator

    Terminal Blocks

    Terminal Strips

    Twist On Wire Connector

    Wire Connectors

    Wire Or Cable Compression Connector

    Wire Or Cable Compression Reducer

    Wire Or Cable Compression Splice

    Wire Terminal Connector Kit

    Wire Terminal Disconnect

    Wiring Taps

Showing 697-708 of 3,357 results

ABB - Installation Products SA 4 N 90 - Tin Plated Aluminum Compression Lug with 90 Degree Bend, #4 Stranded - Compressed - ACSR, Installing Dies TU, 52, BG, 243, 5/8, CSA 22. Length before Bending 5-1/8 inch. Pad 7/8 inch wide x 3 inch long x 7/32 inch thick. (2) 9/16 inch diameter holes on 1-3/4 inch center. Barrel 1-15/32 inch. Oxide Inhibitor. Orange Cap. Dual Rated for Aluminum and Copper Conductors
ABB - Installation Products · ABB

SA 4 N 90


Tin Plated Aluminum Compression Lug with 90 Degree Bend, #4 Stranded - Compressed - ACSR, Installing Dies TU, 52, BG, 243, 5/8, CSA 22. Length before Bending 5-1/8 inch. Pad 7/8 inch wide x 3 inch long x 7/32 inch thick. (2) 9/16 inch diameter holes on 1-3/4 inch center. Barrel 1-15/32 inch. Oxide Inhibitor. Orange Cap. Dual Rated for Aluminum and Copper Conductors

Contact for Pricing

ABB - Installation Products AAPT 1/0-90 - Aluminum Compression Pin Terminal 1/0 Stranded Aluminum - Copper, Dies TU, 52, BG, 243, 5/8. Oxide Inhibitor. Yellow Cap. 90 Degree Bend. 5 inches before bend. 3 inch overall length after Bend. 5/8 inch Outside Barrel Diameter. Pin Length 2 inch x 7/16 inch Diameter with slightly tapered tip. Barrel 1-3/4 inch long.
ABB - Installation Products · ABB

AAPT 1/0-90


Aluminum Compression Pin Terminal 1/0 Stranded Aluminum - Copper, Dies TU, 52, BG, 243, 5/8. Oxide Inhibitor. Yellow Cap. 90 Degree Bend. 5 inches before bend. 3 inch overall length after Bend. 5/8 inch Outside Barrel Diameter. Pin Length 2 inch x 7/16 inch Diameter with slightly tapered tip. Barrel 1-3/4 inch long.

Contact for Pricing

Minimum Qty: 1000

Multiplier: 1000

*Contact for lower quantities*

ABB - Installation Products AL 1-14 TN - Tin-Plated Aluminum Compression Lug, One-Hole NEMA Pad, Bolt Hole 17/64 inch Diameter. #1 Stranded AL9CU, Length 2-5/8, Barrel 59/64 inch, Pad 1 inch x 3/4 inch wide x 5/32 inch thick. Oxide Inhibitor. Gold Cap. Dies TQ, 45, 348, 163, 1/2, 6A. UL listed.
ABB - Installation Products · ABB

AL 1-14 TN


Tin-Plated Aluminum Compression Lug, One-Hole NEMA Pad, Bolt Hole 17/64 inch Diameter. #1 Stranded AL9CU, Length 2-5/8, Barrel 59/64 inch, Pad 1 inch x 3/4 inch wide x 5/32 inch thick. Oxide Inhibitor. Gold Cap. Dies TQ, 45, 348, 163, 1/2, 6A. UL listed.

Contact for Pricing

ABB - Installation Products AL 500-58 TN - Tin Plated Aluminum One-Hole NEMA Lugs, 500 kcmil AL9CU, 477 kcmil, compact 600 kcmil, ACSR 397.5 (26/7) and 477 (18/1), bolt size 5/8, installing dies 106A, 300, 317, 1 5/16, 14A. Length 5-7/16 inch. Pad 1-3/4 inch wide x 1-1/2 inch long x 29/64 inch thick. (1) 9/16 inch diameter hole. Barrel 2-15/16 inch long x 1-5/16 inch outside Diameter. Oxide Inhibitor. Pink Cap.
ABB - Installation Products · ABB

AL 500-58 TN


Tin Plated Aluminum One-Hole NEMA Lugs, 500 kcmil AL9CU, 477 kcmil, compact 600 kcmil, ACSR 397.5 (26/7) and 477 (18/1), bolt size 5/8, installing dies 106A, 300, 317, 1 5/16, 14A. Length 5-7/16 inch. Pad 1-3/4 inch wide x 1-1/2 inch long x 29/64 inch thick. (1) 9/16 inch diameter hole. Barrel 2-15/16 inch long x 1-5/16 inch outside Diameter. Oxide Inhibitor. Pink Cap.

Contact for Pricing

Minimum Qty: 100

Multiplier: 100

*Contact for lower quantities*

ABB - Installation Products AL 400 N 90 - Aluminum Two-Hole NEMA Lugs - 90 Degree Bend, 397.5 - 400 kcmil AL-CU, ACSR 336.4 (26/7) and 397.5 (18/1), installing dies 96, 472, 655, 1 1/8-1, 1 1/8-2, 705, 316, 13A. Length 6-7/8 inch before bending. Pad 1-5/8 inch wide x 3 inch minimum long x 13/32 inch thick. (2) 9/16 inch diameter holes on 1-3/4 inch centers. Barrel 2-7/16 inch long x 1-3/16 inch Outside Diameter. Oxide Inhibitor. Green Cap.
ABB - Installation Products · ABB

AL 400 N 90


Aluminum Two-Hole NEMA Lugs - 90 Degree Bend, 397.5 - 400 kcmil AL-CU, ACSR 336.4 (26/7) and 397.5 (18/1), installing dies 96, 472, 655, 1 1/8-1, 1 1/8-2, 705, 316, 13A. Length 6-7/8 inch before bending. Pad 1-5/8 inch wide x 3 inch minimum long x 13/32 inch thick. (2) 9/16 inch diameter holes on 1-3/4 inch centers. Barrel 2-7/16 inch long x 1-3/16 inch Outside Diameter. Oxide Inhibitor. Green Cap.

Contact for Pricing

ABB - Installation Products AL 3/0-48 - Aluminum One-Hole NEMA Lugs, concentric 3/0 Stranded AL-CU, bolt size 1/2, installing dies TV, 66, 167, 467, 10A. Length 3-7/16 inch. Pad 1 inch wide x 1-9/32 inch long x 1/4 inch thick. (1) 17/32 inch Diameter Hole. Barrel 1-1/2 inch long x 3/4 inch Outside Diameter. Oxide Inhibitor. Black Cap.
ABB - Installation Products · ABB

AL 3/0-48


Aluminum One-Hole NEMA Lugs, concentric 3/0 Stranded AL-CU, bolt size 1/2, installing dies TV, 66, 167, 467, 10A. Length 3-7/16 inch. Pad 1 inch wide x 1-9/32 inch long x 1/4 inch thick. (1) 17/32 inch Diameter Hole. Barrel 1-1/2 inch long x 3/4 inch Outside Diameter. Oxide Inhibitor. Black Cap.

Contact for Pricing

Minimum Qty: 100

Multiplier: 100

*Contact for lower quantities*

ABB - Installation Products AL 250-48 - Aluminum One-Hole NEMA Lugs, concentric 250 kcmil and 4/0 Stranded, ACSR 4/0 AL-CU, 120 MM2, bolt size 1/2, installing dies TX, 76, 249, 840, 11A. Length 3-5/8 inch. Pad 1-15/64 inch wide x 1-5/16 inch long x 19/64 inch thick. Barrel 1-9/16 inch long x 29/32 inch Outside Diameter. Oxide Inhibitor. Red Cap.
ABB - Installation Products · ABB

AL 250-48


Aluminum One-Hole NEMA Lugs, concentric 250 kcmil and 4/0 Stranded, ACSR 4/0 AL-CU, 120 MM2, bolt size 1/2, installing dies TX, 76, 249, 840, 11A. Length 3-5/8 inch. Pad 1-15/64 inch wide x 1-5/16 inch long x 19/64 inch thick. Barrel 1-9/16 inch long x 29/32 inch Outside Diameter. Oxide Inhibitor. Red Cap.

Contact for Pricing

Minimum Qty: 100

Multiplier: 100

*Contact for lower quantities*

ABB - Installation Products AL 750 NTN - Tin Plated Aluminum Two-Hole NEMA Lugs - straight lug, 750 kcmil AL9CU UL listed, installing dies 140H, 301, 342, 1 1/2. Using Die 1 1/2H 700 kcmil, 750 Compact, 900 Compact, 636(24/7), 636(26/7) ACSR, 721(18/1) 721(30/7) ACAR, 740.8 AAAC. Length 8-1/4 inch. Pad 1-3/4 inch wide x 3-3/4 inch long x 37/64 inch Minimum Thick. (2) 9/16 inch holes on 1-3/4 inch centers. Barrel 3-5/16 inch long x 1-19/32 inch outside diameter. Oxide Inhibitor. Red Cap.
ABB - Installation Products · ABB

AL 750 NTN


Tin Plated Aluminum Two-Hole NEMA Lugs - straight lug, 750 kcmil AL9CU UL listed, installing dies 140H, 301, 342, 1 1/2. Using Die 1 1/2H 700 kcmil, 750 Compact, 900 Compact, 636(24/7), 636(26/7) ACSR, 721(18/1) 721(30/7) ACAR, 740.8 AAAC. Length 8-1/4 inch. Pad 1-3/4 inch wide x 3-3/4 inch long x 37/64 inch Minimum Thick. (2) 9/16 inch holes on 1-3/4 inch centers. Barrel 3-5/16 inch long x 1-19/32 inch outside diameter. Oxide Inhibitor. Red Cap.

Contact for Pricing

Minimum Qty: 25

Multiplier: 25

*Contact for lower quantities*

ABB - Installation Products L 350 N - Tin Plated Copper Two-Hole Straight NEMA Lugs. wire size 350 kcmil CU. Installing Dies 71, 840, 18. Length 5-3/4 inch. Pad 1-5/16 inch wide x 3-1/8 inch long x 5/32 inch thick. (2) 9/16 inch holes on 1-3/4 inch center. Barrel 1-53/64 inch. CSA. UL listed.
ABB - Installation Products · ABB

L 350 N


Tin Plated Copper Two-Hole Straight NEMA Lugs. wire size 350 kcmil CU. Installing Dies 71, 840, 18. Length 5-3/4 inch. Pad 1-5/16 inch wide x 3-1/8 inch long x 5/32 inch thick. (2) 9/16 inch holes on 1-3/4 inch center. Barrel 1-53/64 inch. CSA. UL listed.

Contact for Pricing

Minimum Qty: 50

Multiplier: 50

*Contact for lower quantities*

ABB - Installation Products L 500 N - Tin Plated Copper Two-Hole Straight NEMA Lugs. wire size 500 kcmil CU. Installing Dies 1, 87, 251, 20. Length 6-1/16 inch. Pad 1-9/16 inch wide x 3-1/16 inch long x 7/32 inch thick. (2) 9/16 inch holes on 1-3/4 inch center. Barrel 2-3/16 inch. CSA. UL listed.
ABB - Installation Products · ABB

L 500 N


Tin Plated Copper Two-Hole Straight NEMA Lugs. wire size 500 kcmil CU. Installing Dies 1, 87, 251, 20. Length 6-1/16 inch. Pad 1-9/16 inch wide x 3-1/16 inch long x 7/32 inch thick. (2) 9/16 inch holes on 1-3/4 inch center. Barrel 2-3/16 inch. CSA. UL listed.

Contact for Pricing

Minimum Qty: 25

Multiplier: 25

*Contact for lower quantities*

ABB - Installation Products SAKM 350-48 - Aluminum Meter Socket Lug - One-Hole - for 1/2 inch bolt, Wire Range 350 kcmil Aluminum. Installing dies 840, 845, TX, 76, 249, 11A. Length 3-1/8 inch. One Hole Pad 9/16 inch Diameter. Pad 1-9/32 inch long x 1/4 inch thick. Barrel 1-3/4 inch. Oxide Inhibitor. Brown Cap.
ABB - Installation Products · ABB

SAKM 350-48


Aluminum Meter Socket Lug - One-Hole - for 1/2 inch bolt, Wire Range 350 kcmil Aluminum. Installing dies 840, 845, TX, 76, 249, 11A. Length 3-1/8 inch. One Hole Pad 9/16 inch Diameter. Pad 1-9/32 inch long x 1/4 inch thick. Barrel 1-3/4 inch. Oxide Inhibitor. Brown Cap.

Contact for Pricing

Minimum Qty: 50

Multiplier: 50

*Contact for lower quantities*

ABB - Installation Products ABP 4750 C - Aluminum Overhead Transformer Eyebolt Multi-Tap Set Screw Connectors, length 6-15/16 inch, stud size 3/4 X4 1/2, cable range 1/0-750, outlets 4, with Oxide Inhibitor
ABB - Installation Products · ABB

ABP 4750 C


Aluminum Overhead Transformer Eyebolt Multi-Tap Set Screw Connectors, length 6-15/16 inch, stud size 3/4 X4 1/2, cable range 1/0-750, outlets 4, with Oxide Inhibitor

Contact for Pricing

Minimum Qty: 15

Multiplier: 15

*Contact for lower quantities*

Showing 697-708 of 3,357 results