All Categories

Electrical Systems and Lighting and Components and Accessories and Supplies

Electrical Equipment, Components, and Supplies

Electrical Lugs Plugs And Connectors

Subcategories

    Automatic Wire Or Cable Connector

    Backshell connectors

    Battery Terminal

    Cable Gland Connector

    Cable Joint

    Cable Or Wire Lug

    Circular Connectors

    Coaxial Connectors

    Connecting Leads or Wires

    Connector And Cable Seal

    Crab Joint

    Electrical Connector Assembly

    Electrical Extension Cable

    Electrical Metallic Tubing Emt Connectors

    Electrical Metallic Tubing Emt Elbow

    Electrical plug/receptacle adapter

    Electrical Plugs

    Electrical Receptacles

    Electrical Sleeves

    Electrical Taps

    Electrical Terminals

    Electrical Underground Bus Connector

    Electrodes

    Electronic Connector Caps

    Flex Connectors

    Flexible Braid

    Heavy Duty Connector Hood & Housing

    Heavy Duty Connector Insert & Contact

    Input Output Connector Cover

    Jack for Plug

    Jumper Bar

    Liquid Tight Connectors

    Locking Plug

    Mechanical Connector Lug and Cap

    Mechanical Connectors

    Panel Interface Connector

    Power Distribution Blocks

    Printed Circuit Board Pcb Press Fit Header Connector

    Rj Jack And Module

    Tap Off

    Telecommunication Connector

    Terminal Block Accessories

    Terminal Block Covers

    Terminal Block Markers and Marking Accessories

    Terminal Block Separator

    Terminal Blocks

    Terminal Strips

    Twist On Wire Connector

    Wire Connectors

    Wire Or Cable Compression Connector

    Wire Or Cable Compression Reducer

    Wire Or Cable Compression Splice

    Wire Terminal Connector Kit

    Wire Terminal Disconnect

    Wiring Taps

Showing 3241-3252 of 3,357 results

ABB - Installation Products ZB 954 M 56 - Aluminum H-Tap - Conductor Size Main 266.8 - 1000 kcmil Tap 266.8 - 1000 kcmil, Dies Z or R
ABB - Installation Products · ABB

ZB 954 M 56


Aluminum H-Tap - Conductor Size Main 266.8 - 1000 kcmil Tap 266.8 - 1000 kcmil, Dies Z or R

Contact for Pricing

ABB - Installation Products ZB 95410 M 56 - Aluminum H-Tap - Compression Connector. Conductor Size Main 250 kcmil - 954 ACSR. Tap 1/0 Stranded - 4/0 ACSR, #6 Solid - #2 Stranded. Dies Z or R. 3 inch wide x 2-53/64 inch tall x 1-45/64 inch thick.
ABB - Installation Products · ABB

ZB 95410 M 56


Aluminum H-Tap - Compression Connector. Conductor Size Main 250 kcmil - 954 ACSR. Tap 1/0 Stranded - 4/0 ACSR, #6 Solid - #2 Stranded. Dies Z or R. 3 inch wide x 2-53/64 inch tall x 1-45/64 inch thick.

Contact for Pricing

Minimum Qty: 4

Multiplier: 4

*Contact for lower quantities*

ABB - Installation Products L35-128B - Type L - Copper Single Conductor, One-Hole Mount for Conductor Range 14 Solid-8 Stranded, Slot Head Screw. Quantity 5000
ABB - Installation Products · ABB

L35-128B


Type L - Copper Single Conductor, One-Hole Mount for Conductor Range 14 Solid-8 Stranded, Slot Head Screw. Quantity 5000

Contact for Pricing

Minimum Qty: 25

Multiplier: 25

*Contact for lower quantities*

ABB - Installation Products AL 700-258-608 TN - Tin Plated Aluminum Two-Hole NEMA Lugs - straight lug, 600 - 700 kcmil AL-CU, Compact 700-795, installing dies 125H, 608, 786. Length 7-5/8 inch. Pad 1-3/4 inch wide x 3-1/2 inch long x 29/64 inch thick. (2) 11/16 inch diameter holes on 1-3/4 inch centers. Barrel 3-1/16 inch x 1-1/2 inch outside Diameter. Oxide Inhibitor. Purple Cap.
ABB - Installation Products · ABB

AL 700-258-608 TN


Tin Plated Aluminum Two-Hole NEMA Lugs - straight lug, 600 - 700 kcmil AL-CU, Compact 700-795, installing dies 125H, 608, 786. Length 7-5/8 inch. Pad 1-3/4 inch wide x 3-1/2 inch long x 29/64 inch thick. (2) 11/16 inch diameter holes on 1-3/4 inch centers. Barrel 3-1/16 inch x 1-1/2 inch outside Diameter. Oxide Inhibitor. Purple Cap.

Contact for Pricing

Minimum Qty: 75

Multiplier: 75

*Contact for lower quantities*

ABB - Installation Products AL 500 NTN 90 - Tin Plated Aluminum Two-Hole NEMA Lugs - 90 Degrees, 477-500 kcmil, 600 Compact AL-CU ACSR 397.5 (26/7) and 477 (18/1) using Installing Dies 106A, 300, 317, 1 5/16, 14A, 15A. Length 8 inch before bending. Pad 1-3/4 inch wide x 3 inch minimum long x 29/64 inch thick. Barrel 2-15/16 inch long x 1-5/16 inch Outside Diameter. (2) 9/16 inch diameter holes on 1-3/4 inch center. Oxide Inhibitor. Pink Cap.
ABB - Installation Products · ABB

AL 500 NTN 90


Tin Plated Aluminum Two-Hole NEMA Lugs - 90 Degrees, 477-500 kcmil, 600 Compact AL-CU ACSR 397.5 (26/7) and 477 (18/1) using Installing Dies 106A, 300, 317, 1 5/16, 14A, 15A. Length 8 inch before bending. Pad 1-3/4 inch wide x 3 inch minimum long x 29/64 inch thick. Barrel 2-15/16 inch long x 1-5/16 inch Outside Diameter. (2) 9/16 inch diameter holes on 1-3/4 inch center. Oxide Inhibitor. Pink Cap.

Contact for Pricing

Minimum Qty: 30

Multiplier: 30

*Contact for lower quantities*

ABB - Installation Products AL 750 N 608 GSH - Aluminum Compression Lug, 700-750 kcmil AL-CU, 636(26/7) ACSR, 400 MM2, Dies 125H, 608, 786, 936. Bolt size 1/2 inch, Length 8-1/4 inch. Two Hole NEMA Pad, Pad 1-3/4 inch wide x 3-53/64 inch long x 15/32 inch thick. (2) 9/16 inch holes on 1-3/4 inch center. Barrel 3-3/8 inch long x 1-1/2 inch Outside Diameter. Oxide Inhibitor. Yellow Cap. Includes Galvanized Steel Hardware (2) Bolts 1/2-13 x 2 Full Thread, (2) 1/2-13 Nuts, (4) 1/2 inch Flat Washer, and (2) Stainless Steel Belleville 1/2 inch Washers.
ABB - Installation Products · ABB

AL 750 N 608 GSH


Aluminum Compression Lug, 700-750 kcmil AL-CU, 636(26/7) ACSR, 400 MM2, Dies 125H, 608, 786, 936. Bolt size 1/2 inch, Length 8-1/4 inch. Two Hole NEMA Pad, Pad 1-3/4 inch wide x 3-53/64 inch long x 15/32 inch thick. (2) 9/16 inch holes on 1-3/4 inch center. Barrel 3-3/8 inch long x 1-1/2 inch Outside Diameter. Oxide Inhibitor. Yellow Cap. Includes Galvanized Steel Hardware (2) Bolts 1/2-13 x 2 Full Thread, (2) 1/2-13 Nuts, (4) 1/2 inch Flat Washer, and (2) Stainless Steel Belleville 1/2 inch Washers.

Contact for Pricing

Minimum Qty: 200

Multiplier: 200

*Contact for lower quantities*

ABB - Installation Products HL 1000-58 - Tin Plated Copper Peep Hole Lug, 1-Hole, Wire Size 1000 kcmil Copper, Length 4-15/16 inch. Pad 2-11/64 inch wide x 2-1/8 inch long x 5/16 inch thick with (1) 11/16 inch Diameter Hole. Barrel 1-15/16 inch x 1-1/2 inch Diameter. CSA and UL listed.
ABB - Installation Products · ABB

HL 1000-58


Tin Plated Copper Peep Hole Lug, 1-Hole, Wire Size 1000 kcmil Copper, Length 4-15/16 inch. Pad 2-11/64 inch wide x 2-1/8 inch long x 5/16 inch thick with (1) 11/16 inch Diameter Hole. Barrel 1-15/16 inch x 1-1/2 inch Diameter. CSA and UL listed.

Contact for Pricing

ABB - Installation Products PL 750 N (UNPLATED) - Copper Compression Lug, 750 kcmil CU, Installing Dies 106, 24, 1 5/16. Length 7 inch. Pad 1-3/4 inch wide x 3-1/8 inch long x 9/32 inch thick. (2) 9/16 inch diameter holes on 1-3/4 inch center. Barrel 2-13/16 inch. Not Plated.
ABB - Installation Products · ABB

PL 750 N (UNPLATED)


Copper Compression Lug, 750 kcmil CU, Installing Dies 106, 24, 1 5/16. Length 7 inch. Pad 1-3/4 inch wide x 3-1/8 inch long x 9/32 inch thick. (2) 9/16 inch diameter holes on 1-3/4 inch center. Barrel 2-13/16 inch. Not Plated.

Contact for Pricing

ABB - Installation Products CCAL 750 N - Tin Plated Aluminum Compression Lug, 750 kcmil CCA, (1184/22), Length 8 inches. Pad 1-3/4 inch wide x 3-5/8 nch long x 21/32 inch thick. (2) 9/32 inch Radius Slots on 1-3/4 inch centers. Bolt size 1/2 inch. Barrel 3 inch long x 1-47/64 inch outside diameter. Installing Dies 150, 302, 115X. Oxide Inhibitor. Brown Cap. CCA9 UL listed.
ABB - Installation Products · ABB

CCAL 750 N


Tin Plated Aluminum Compression Lug, 750 kcmil CCA, (1184/22), Length 8 inches. Pad 1-3/4 inch wide x 3-5/8 nch long x 21/32 inch thick. (2) 9/32 inch Radius Slots on 1-3/4 inch centers. Bolt size 1/2 inch. Barrel 3 inch long x 1-47/64 inch outside diameter. Installing Dies 150, 302, 115X. Oxide Inhibitor. Brown Cap. CCA9 UL listed.

Contact for Pricing

ABB - Installation Products L 500 NSPC V3 - Tin Plated Copper Two-Hole Compression Lug, 500 kcmil Copper, Installing Dies 1, 87, 251, 20. Length 23 inch. Pad 1-33/64 inch wide x 3-1/16 inch long x 7/32 inch thick. (2) 9/16 inch Diameter Holes on 1-3/4 inch centers. Barrel 18-3/4 inch. Special Compound and Clear Cap. No Dimple in Barrel.
ABB - Installation Products · ABB

L 500 NSPC V3


Tin Plated Copper Two-Hole Compression Lug, 500 kcmil Copper, Installing Dies 1, 87, 251, 20. Length 23 inch. Pad 1-33/64 inch wide x 3-1/16 inch long x 7/32 inch thick. (2) 9/16 inch Diameter Holes on 1-3/4 inch centers. Barrel 18-3/4 inch. Special Compound and Clear Cap. No Dimple in Barrel.

Contact for Pricing

ABB - Installation Products L 500 N 22 HS - Copper Tin-Plated Two-Hole Straight NEMA Lugs - straight lug, wire size 500 kcmil CU, Installing Dies 1, 87, 251, 20. Length 22 inch. Pad 1-33/64 inch wide x 3-1/16 inch long x 7/32 inch thick. (2) 9/16 inch Diameter Holes on 1-3/4 inch centers. Barrel 18-1/8 inch long. Includes Silicone Packet, Heat Shrink Tube and EPDM Insulating Rocket.
ABB - Installation Products · ABB

L 500 N 22 HS


Copper Tin-Plated Two-Hole Straight NEMA Lugs - straight lug, wire size 500 kcmil CU, Installing Dies 1, 87, 251, 20. Length 22 inch. Pad 1-33/64 inch wide x 3-1/16 inch long x 7/32 inch thick. (2) 9/16 inch Diameter Holes on 1-3/4 inch centers. Barrel 18-1/8 inch long. Includes Silicone Packet, Heat Shrink Tube and EPDM Insulating Rocket.

Contact for Pricing

ABB - Installation Products GLE 2/0 N - Aluminum Two-Hole Compression Lug - Wire Size 2/0 Compressed or Compact, Length 5-9/32 inch, Pad width 1-9/64 inch x 3-1/8 inch long x 9/32 inch thick with (2) 9/16 inch Diameter Holes on 1-3/4 inch Center. Barrel 1-15/32 inch long. Dies CSA24, 702, 298. Oxide Inhibitor with Black Cap. Dual Rated for Aluminum and Copper Conductors
ABB - Installation Products · ABB

GLE 2/0 N


Aluminum Two-Hole Compression Lug - Wire Size 2/0 Compressed or Compact, Length 5-9/32 inch, Pad width 1-9/64 inch x 3-1/8 inch long x 9/32 inch thick with (2) 9/16 inch Diameter Holes on 1-3/4 inch Center. Barrel 1-15/32 inch long. Dies CSA24, 702, 298. Oxide Inhibitor with Black Cap. Dual Rated for Aluminum and Copper Conductors

Contact for Pricing

Minimum Qty: 100

Multiplier: 100

*Contact for lower quantities*

Showing 3241-3252 of 3,357 results