All Categories

Electrical Systems and Lighting and Components and Accessories and Supplies

Electrical Equipment, Components, and Supplies

Electrical Lugs Plugs And Connectors

Subcategories

    Automatic Wire Or Cable Connector

    Backshell connectors

    Battery Terminal

    Cable Gland Connector

    Cable Joint

    Cable Or Wire Lug

    Circular Connectors

    Coaxial Connectors

    Connecting Leads or Wires

    Connector And Cable Seal

    Crab Joint

    Electrical Connector Assembly

    Electrical Extension Cable

    Electrical Metallic Tubing Emt Connectors

    Electrical Metallic Tubing Emt Elbow

    Electrical plug/receptacle adapter

    Electrical Plugs

    Electrical Receptacles

    Electrical Sleeves

    Electrical Taps

    Electrical Terminals

    Electrical Underground Bus Connector

    Electrodes

    Electronic Connector Caps

    Flex Connectors

    Flexible Braid

    Heavy Duty Connector Hood & Housing

    Heavy Duty Connector Insert & Contact

    Input Output Connector Cover

    Jack for Plug

    Jumper Bar

    Liquid Tight Connectors

    Locking Plug

    Mechanical Connector Lug and Cap

    Mechanical Connectors

    Panel Interface Connector

    Power Distribution Blocks

    Printed Circuit Board Pcb Press Fit Header Connector

    Rj Jack And Module

    Tap Off

    Telecommunication Connector

    Terminal Block Accessories

    Terminal Block Covers

    Terminal Block Markers and Marking Accessories

    Terminal Block Separator

    Terminal Blocks

    Terminal Strips

    Twist On Wire Connector

    Wire Connectors

    Wire Or Cable Compression Connector

    Wire Or Cable Compression Reducer

    Wire Or Cable Compression Splice

    Wire Terminal Connector Kit

    Wire Terminal Disconnect

    Wiring Taps

Showing 3217-3228 of 3,357 results

ABB - Installation Products AL 750 N 608 TN - Tin Plated Aluminum Multi-Range Die-Less Lugs, 750 kcmil AL9CU UL Listed using Dies 125H, 608, 786, 936. 700 kcmil, 400 MM2, 636(26/7) ACSR. Can use VC 8 Tool for 500-750 kcmil AL-CU and 636(26/7). Length 8-1/4 inch. Pad 1-3/4 inch wide x 3-53/64 inch long x 15/32 inch thick. (2) 9/16 inch holes on 1-3/4 inch center. Barrel 3-3/8 inch long x 1-1/2 inch Outside Diameter. Oxide Inhibitor. Red Cap.
ABB - Installation Products · ABB

AL 750 N 608 TN


Tin Plated Aluminum Multi-Range Die-Less Lugs, 750 kcmil AL9CU UL Listed using Dies 125H, 608, 786, 936. 700 kcmil, 400 MM2, 636(26/7) ACSR. Can use VC 8 Tool for 500-750 kcmil AL-CU and 636(26/7). Length 8-1/4 inch. Pad 1-3/4 inch wide x 3-53/64 inch long x 15/32 inch thick. (2) 9/16 inch holes on 1-3/4 inch center. Barrel 3-3/8 inch long x 1-1/2 inch Outside Diameter. Oxide Inhibitor. Red Cap.

Contact for Pricing

Minimum Qty: 75

Multiplier: 75

*Contact for lower quantities*

ABB - Installation Products ASL 2 NTN - Tin Plated Aluminum Two-Hole NEMA Lugs - Stacking Lug, Stranded 1 and 2, Compressed 1, Solid 1/0, ACSR 2. Bolt hole size 5/16 inch, installing dies TU, 52, BG, 243, 5/8. Length 5-3/16 inch. Pad 3/4 inch wide x 2-7/8 inch long x 17/64 inch thick. (2) 9/16 inch holes on 1-3/4 inch centers. Barrel 1-7/16 inch long x 41/64 inch Outside Diameter. Oxide Inhibitor. Red Cap. Dual Rated for use with Aluminum and Copper Conductors.
ABB - Installation Products · ABB

ASL 2 NTN


Tin Plated Aluminum Two-Hole NEMA Lugs - Stacking Lug, Stranded 1 and 2, Compressed 1, Solid 1/0, ACSR 2. Bolt hole size 5/16 inch, installing dies TU, 52, BG, 243, 5/8. Length 5-3/16 inch. Pad 3/4 inch wide x 2-7/8 inch long x 17/64 inch thick. (2) 9/16 inch holes on 1-3/4 inch centers. Barrel 1-7/16 inch long x 41/64 inch Outside Diameter. Oxide Inhibitor. Red Cap. Dual Rated for use with Aluminum and Copper Conductors.

Contact for Pricing

Minimum Qty: 200

Multiplier: 200

*Contact for lower quantities*

ABB - Installation Products ASL 2/0 NTN - Tin Plated Aluminum Two-Hole NEMA Lugs - stacking lug, 2/0 Stranded AL9CU - UL listed, bolt hole size 9/16 inch, installing dies TW-TY, 58, U26ART. Length 5-3/8 inch. Pad 15/16 inch wide x 3 inch long x 15/64 inch thick. (2) 9/16 inch holes on 1-3/4 inch centers. Barrel 1-11/16 inch long x 11/16 inch Outside Diameter. Oxide Inhibitor. Olive Cap.
ABB - Installation Products · ABB

ASL 2/0 NTN


Tin Plated Aluminum Two-Hole NEMA Lugs - stacking lug, 2/0 Stranded AL9CU - UL listed, bolt hole size 9/16 inch, installing dies TW-TY, 58, U26ART. Length 5-3/8 inch. Pad 15/16 inch wide x 3 inch long x 15/64 inch thick. (2) 9/16 inch holes on 1-3/4 inch centers. Barrel 1-11/16 inch long x 11/16 inch Outside Diameter. Oxide Inhibitor. Olive Cap.

Contact for Pricing

Minimum Qty: 200

Multiplier: 200

*Contact for lower quantities*

ABB - Installation Products ASL 4/0 NTN - Tin Plated Aluminum Two-Hole NEMA Lugs - Stacking lug, 4/0 Stranded AL9CU - UL listed, 250 Compact. Installing dies TX, 71H, W660, U28ART. Use VC 5 or VC 6 Tools for #2 - 4/0 Stranded. Length 5-59/64 inch. Pad 1-3/16 inch wide x 3 inch long x 19/64 inch thick. (2) 9/16 inch holes on 1-3/4 inch Centers. Barrel 1-15/16 inch long x 7/8 inch Outside Diameter. Oxide Inhibitor. White Cap.
ABB - Installation Products · ABB

ASL 4/0 NTN


Tin Plated Aluminum Two-Hole NEMA Lugs - Stacking lug, 4/0 Stranded AL9CU - UL listed, 250 Compact. Installing dies TX, 71H, W660, U28ART. Use VC 5 or VC 6 Tools for #2 - 4/0 Stranded. Length 5-59/64 inch. Pad 1-3/16 inch wide x 3 inch long x 19/64 inch thick. (2) 9/16 inch holes on 1-3/4 inch Centers. Barrel 1-15/16 inch long x 7/8 inch Outside Diameter. Oxide Inhibitor. White Cap.

Contact for Pricing

ABB - Installation Products ASL 400 NTN - Tin Plated Aluminum Two-Hole NEMA Lugs - Stacking lug, 400 kcmil AL9CU - UL Listed, 397.5 kcmil, 500 Compact, ACSR 336.4(26/7) and 397.5 (18/1), 396.3 (15/7) ACAR, 394.5 Stranded AAAC. Installing dies 96, 472, 655, 1, 1/8-1, 13A. Length 6-7/8 inch. Pad 1-43/64 inch wide x 3 inch long x 25/64 inch thick. (2) 9/16 inch holes on 1-3/4 inch centers. Barrel 2-7/16 inch long x 1-3/16 inch Outside Diameter. Oxide Inhibitor. Green Cap.
ABB - Installation Products · ABB

ASL 400 NTN


Tin Plated Aluminum Two-Hole NEMA Lugs - Stacking lug, 400 kcmil AL9CU - UL Listed, 397.5 kcmil, 500 Compact, ACSR 336.4(26/7) and 397.5 (18/1), 396.3 (15/7) ACAR, 394.5 Stranded AAAC. Installing dies 96, 472, 655, 1, 1/8-1, 13A. Length 6-7/8 inch. Pad 1-43/64 inch wide x 3 inch long x 25/64 inch thick. (2) 9/16 inch holes on 1-3/4 inch centers. Barrel 2-7/16 inch long x 1-3/16 inch Outside Diameter. Oxide Inhibitor. Green Cap.

Contact for Pricing

ABB - Installation Products ASL 750 N - Aluminum Two-Hole NEMA Lugs - stacking lug, 700-750 kcmil AL-CU, ACSR 636 (26/7), installing dies 140H, 301, 342, 1 1/2. Length 8-1/4 inch. Pad 1-3/4 inch wide x 3 inch long x 7/16 inch thick. (2) 9/16 inch holes on 1-3/4 inch centers. Barrel 3-5/16 inch long x 1-19/32 inch outside Diameter. Oxide Inhibitor. Yellow Cap.
ABB - Installation Products · ABB

ASL 750 N


Aluminum Two-Hole NEMA Lugs - stacking lug, 700-750 kcmil AL-CU, ACSR 636 (26/7), installing dies 140H, 301, 342, 1 1/2. Length 8-1/4 inch. Pad 1-3/4 inch wide x 3 inch long x 7/16 inch thick. (2) 9/16 inch holes on 1-3/4 inch centers. Barrel 3-5/16 inch long x 1-19/32 inch outside Diameter. Oxide Inhibitor. Yellow Cap.

Contact for Pricing

Minimum Qty: 40

Multiplier: 40

*Contact for lower quantities*

ABB - Installation Products ASL 750 NTN - Tin Plated Aluminum Two-Hole NEMA Lugs - stacking lug, 750 kcmil AL9CU - UL listed, 700 kcmil, ACSR 636 (26/7 and 24/7), 750-900 Compact, 721 (30/7 and 18/19) ACAR. Installing Dies 140H, 301, 342, 1 1/2. Length 8-1/4 inch. Pad 1-3/4 inch wide x 3 inch long x 19/32 inch thick. (2) 9/16 inch holes on 1-3/4 inch centers. Barrel 3-5/16 inch long x 1-19/32 inch outside Diameter. Oxide Inhibitor. Red Cap.
ABB - Installation Products · ABB

ASL 750 NTN


Tin Plated Aluminum Two-Hole NEMA Lugs - stacking lug, 750 kcmil AL9CU - UL listed, 700 kcmil, ACSR 636 (26/7 and 24/7), 750-900 Compact, 721 (30/7 and 18/19) ACAR. Installing Dies 140H, 301, 342, 1 1/2. Length 8-1/4 inch. Pad 1-3/4 inch wide x 3 inch long x 19/32 inch thick. (2) 9/16 inch holes on 1-3/4 inch centers. Barrel 3-5/16 inch long x 1-19/32 inch outside Diameter. Oxide Inhibitor. Red Cap.

Contact for Pricing

Minimum Qty: 20

Multiplier: 20

*Contact for lower quantities*

ABB - Installation Products ATT 350-350 - Aluminum Tapered Tee, Main 336.4-350 kcmil AL-CU, 266.8 (26/7), 336.4 (18/1), Tap 336.4-350 kcmil AL-CU, 266.8 (26/7), 336.4 (18/1). Main 3-1/8 inch, Taps 7 inch with Dimple at 3-1/2 inch. Dies 1 1/8-1, 96, 299, 13A, 655. Oxide Inhibitor. Brown Caps.
ABB - Installation Products · ABB

ATT 350-350


Aluminum Tapered Tee, Main 336.4-350 kcmil AL-CU, 266.8 (26/7), 336.4 (18/1), Tap 336.4-350 kcmil AL-CU, 266.8 (26/7), 336.4 (18/1). Main 3-1/8 inch, Taps 7 inch with Dimple at 3-1/2 inch. Dies 1 1/8-1, 96, 299, 13A, 655. Oxide Inhibitor. Brown Caps.

Contact for Pricing

ABB - Installation Products AT 1/0-1/0 - Aluminum Tees, Main 1/0 Stranded AL-CU, Tap 1/0 Stranded AL-CU. Main Length 2-1/2 inch x 41/64 inch outside Diameter, Total Tap Length 5-1/2 inch x 41/64 inch outside Diameter. Dies TU, 52, BG, 243, 5/8, 8A. No Dimple. Oxide Inhibitor. Yellow Caps.
ABB - Installation Products · ABB

AT 1/0-1/0


Aluminum Tees, Main 1/0 Stranded AL-CU, Tap 1/0 Stranded AL-CU. Main Length 2-1/2 inch x 41/64 inch outside Diameter, Total Tap Length 5-1/2 inch x 41/64 inch outside Diameter. Dies TU, 52, BG, 243, 5/8, 8A. No Dimple. Oxide Inhibitor. Yellow Caps.

Contact for Pricing

ABB - Installation Products CFT 2S-X - Copper Full Tension Compression Splices - CFT Series, wire size 2 Solid, length 3 inch, installing dies - X163.
ABB - Installation Products · ABB

CFT 2S-X


Copper Full Tension Compression Splices - CFT Series, wire size 2 Solid, length 3 inch, installing dies - X163.

Contact for Pricing

Minimum Qty: 550

Multiplier: 550

*Contact for lower quantities*

ABB - Installation Products L 4-2516 - Tin Plated Copper Two-Hole Straight NEMA Lug. wire size # 4 Stranded. Installing Dies 5/16, 8, TP, 29. Length 2-23/32 inch. Pad 33/64 inch wide x 1-9/32 inch long x 5/64 inch thick. (2) 21/64 inch holes on 5/8 inch centers. Barrel 15/16 inch. UL listed.
ABB - Installation Products · ABB

L 4-2516


Tin Plated Copper Two-Hole Straight NEMA Lug. wire size # 4 Stranded. Installing Dies 5/16, 8, TP, 29. Length 2-23/32 inch. Pad 33/64 inch wide x 1-9/32 inch long x 5/64 inch thick. (2) 21/64 inch holes on 5/8 inch centers. Barrel 15/16 inch. UL listed.

Contact for Pricing

Minimum Qty: 100

Multiplier: 100

*Contact for lower quantities*

ABB - Installation Products L 4-38 - Tin Plated Copper One-Hole Straight NEMA Lug. wire size # 4 Stranded CU. Installing Dies 29, 161, 5/16, 8. Length 2-25/64 inch. Pad 37/64 inch wide x 57/64 inch long x 5/64 inch thick. (1) 25/64 inch hole. Barrel 1-1/8 inch. CSA. UL listed.
ABB - Installation Products · ABB

L 4-38


Tin Plated Copper One-Hole Straight NEMA Lug. wire size # 4 Stranded CU. Installing Dies 29, 161, 5/16, 8. Length 2-25/64 inch. Pad 37/64 inch wide x 57/64 inch long x 5/64 inch thick. (1) 25/64 inch hole. Barrel 1-1/8 inch. CSA. UL listed.

Contact for Pricing

Minimum Qty: 200

Multiplier: 200

*Contact for lower quantities*

Showing 3217-3228 of 3,357 results