All Categories

Electrical Systems and Lighting and Components and Accessories and Supplies

Electrical Equipment, Components, and Supplies

Electrical Lugs Plugs And Connectors

Subcategories

    Automatic Wire Or Cable Connector

    Backshell connectors

    Battery Terminal

    Cable Gland Connector

    Cable Joint

    Cable Or Wire Lug

    Circular Connectors

    Coaxial Connectors

    Connecting Leads or Wires

    Connector And Cable Seal

    Crab Joint

    Electrical Connector Assembly

    Electrical Extension Cable

    Electrical Metallic Tubing Emt Connectors

    Electrical Metallic Tubing Emt Elbow

    Electrical plug/receptacle adapter

    Electrical Plugs

    Electrical Receptacles

    Electrical Sleeves

    Electrical Taps

    Electrical Terminals

    Electrical Underground Bus Connector

    Electrodes

    Electronic Connector Caps

    Flex Connectors

    Flexible Braid

    Heavy Duty Connector Hood & Housing

    Heavy Duty Connector Insert & Contact

    Input Output Connector Cover

    Jack for Plug

    Jumper Bar

    Liquid Tight Connectors

    Locking Plug

    Mechanical Connector Lug and Cap

    Mechanical Connectors

    Panel Interface Connector

    Power Distribution Blocks

    Printed Circuit Board Pcb Press Fit Header Connector

    Rj Jack And Module

    Tap Off

    Telecommunication Connector

    Terminal Block Accessories

    Terminal Block Covers

    Terminal Block Markers and Marking Accessories

    Terminal Block Separator

    Terminal Blocks

    Terminal Strips

    Twist On Wire Connector

    Wire Connectors

    Wire Or Cable Compression Connector

    Wire Or Cable Compression Reducer

    Wire Or Cable Compression Splice

    Wire Terminal Connector Kit

    Wire Terminal Disconnect

    Wiring Taps

Showing 289-300 of 3,357 results

NSI Industries IPLD2-4C - The Polaris IPLD2-4C Multi-Tap Dual-Sided Entry Vision Tap Connector features 4 ports sized for 2 AWG - 14 AWG wires. The clear body allows users to see their conductor placement and is wrapped in a layer of plastisol insulation. Each dual-sided port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.
NSI Industries · Polaris · Polaris Vision Tap

IPLD2-4C


The Polaris IPLD2-4C Multi-Tap Dual-Sided Entry Vision Tap Connector features 4 ports sized for 2 AWG - 14 AWG wires. The clear body allows users to see their conductor placement and is wrapped in a layer of plastisol insulation. Each dual-sided port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.

Contact for Pricing

Minimum Qty: 6

Multiplier: 6

*Contact for lower quantities*

Panduit EJN218-216K-L - StrongHold Insulated Nylon Wire Joint for Wire Range 22-16

StrongHold Insulated Nylon Wire Joint for Wire Range 22-16

Contact for Pricing

Minimum Qty: 500

Multiplier: 50

*Contact for lower quantities*

Panduit EV14-14RBK-Q - StrongHold EV14-14RBK-Q Contractor Grade Insulated Ring Terminals are a reliable and economical option that withstand a wide range of general-purpose applications. The ring tongue design assures a secure connection in high vibration applications. Accommodates 16-14 AWG, compatible with #1/4 Stud (M6), are blue in color, and come in packages of 25.

StrongHold EV14-14RBK-Q Contractor Grade Insulated Ring Terminals are a reliable and economical option that withstand a wide range of general-purpose applications. The ring tongue design assures a secure connection in high vibration applications. Accommodates 16-14 AWG, compatible with #1/4 Stud (M6), are blue in color, and come in packages of 25.

Contact for Pricing

Minimum Qty: 250

Multiplier: 25

*Contact for lower quantities*

Panduit EV18-8FBK-Q - StrongHold Fork Terminal, vinyl insulated, 22 - 18 AWG, #8 Stud Size.

StrongHold Fork Terminal, vinyl insulated, 22 - 18 AWG, #8 Stud Size.

Contact for Pricing

Minimum Qty: 250

Multiplier: 25

*Contact for lower quantities*

Panduit ESV18BXK-Q - StrongHold ESV18BXK-Q Contractor Grade Vinyl Insulated Butt Splices are a reliable and economical option that withstand a wide range of general-purpose applications. They are designed to splice two solid or stranded wires together to repair or lengthen wires. Accommodates 22-18 AWG, are red in color, and come in packages of 25.
Panduit

ESV18BXK-Q


StrongHold ESV18BXK-Q Contractor Grade Vinyl Insulated Butt Splices are a reliable and economical option that withstand a wide range of general-purpose applications. They are designed to splice two solid or stranded wires together to repair or lengthen wires. Accommodates 22-18 AWG, are red in color, and come in packages of 25.

Contact for Pricing

Minimum Qty: 250

Multiplier: 25

*Contact for lower quantities*

ABB - Installation Products AL 750-48 TN - Tin-Plated Aluminum Compression Lug, One-Hole NEMA Pad, 750 kcmil AL9CU UL Listed using Intalling Dies 140H, 301, 342, 1 1/2. 700 kcmil, 636(26/7) ACSR. Using Install Tool VC-8 500-750 kcmil AL-CU. 1/2 inch Bolt size. Length 6-3/8 inch. Pad 1-3/4 inch wide x 1-7/8 inch long x 35/64 inch thick. (1) 9/16 inch Diameter Hole. Oxide Inhibitor. Red Cap.
ABB - Installation Products · ABB

AL 750-48 TN


Tin-Plated Aluminum Compression Lug, One-Hole NEMA Pad, 750 kcmil AL9CU UL Listed using Intalling Dies 140H, 301, 342, 1 1/2. 700 kcmil, 636(26/7) ACSR. Using Install Tool VC-8 500-750 kcmil AL-CU. 1/2 inch Bolt size. Length 6-3/8 inch. Pad 1-3/4 inch wide x 1-7/8 inch long x 35/64 inch thick. (1) 9/16 inch Diameter Hole. Oxide Inhibitor. Red Cap.

Contact for Pricing

Minimum Qty: 50

Multiplier: 50

*Contact for lower quantities*

ABB - Installation Products AAPT 2/0-90 - Aluminum Compression Pin Terminal 2/0 Stranded Aluminum - Copper. Dies TX, 76, 249, 840, 11A. Oxide Inhibitor. Gray Cap. 90 Degree Bend. 6.875 inches before bend. 4.090 inch overall length after Bend.
ABB - Installation Products · ABB

AAPT 2/0-90


Aluminum Compression Pin Terminal 2/0 Stranded Aluminum - Copper. Dies TX, 76, 249, 840, 11A. Oxide Inhibitor. Gray Cap. 90 Degree Bend. 6.875 inches before bend. 4.090 inch overall length after Bend.

Contact for Pricing

Minimum Qty: 150

Multiplier: 150

*Contact for lower quantities*

ABB - Installation Products AL 1272-4 N - Aluminum Four-Hole NEMA Lugs, 1272 kcmil AL-CU, installing dies 161, 727, 352, 579. Length 11-1/4 inch. Pad 3 inch wide x 3-5/8 inch long x 1/2 inch thick. (4) 9/16 inch Diameter Holes on 1-3/4 inch Center Spacing. Barrel 6-7/16 inch long x 1-31/32 inch Outside Diameter. Oxide Inhibitor, Yellow Cap.
ABB - Installation Products · ABB

AL 1272-4 N


Aluminum Four-Hole NEMA Lugs, 1272 kcmil AL-CU, installing dies 161, 727, 352, 579. Length 11-1/4 inch. Pad 3 inch wide x 3-5/8 inch long x 1/2 inch thick. (4) 9/16 inch Diameter Holes on 1-3/4 inch Center Spacing. Barrel 6-7/16 inch long x 1-31/32 inch Outside Diameter. Oxide Inhibitor, Yellow Cap.

Contact for Pricing

Minimum Qty: 50

Multiplier: 50

*Contact for lower quantities*

ABB - Installation Products AL250 NTN / SA4/0NTN - Tin Plated Aluminum Compression Lug, 250 kcmil, AL9CU UL listed. 4/0 Stranded, 4/0 or 6/1 ACSR, 250-300 Compact, 246.9 AAAC. Installing Dies TX, 76, 249, 840, 11A. Bolt size 1/2 inch, Two hole NEMA pad, Length 6 inches, Barrel 1-15/16 inches, Pad 1-15/64 inch wide x 3-11/32 inch long x 19/64 inch thick. (2) 9/16 inch Diameter holes on 1-3/4 inch centers. Oxide Inhibitor. Red Cap.
ABB - Installation Products · ABB

AL250 NTN / SA4/0NTN


Tin Plated Aluminum Compression Lug, 250 kcmil, AL9CU UL listed. 4/0 Stranded, 4/0 or 6/1 ACSR, 250-300 Compact, 246.9 AAAC. Installing Dies TX, 76, 249, 840, 11A. Bolt size 1/2 inch, Two hole NEMA pad, Length 6 inches, Barrel 1-15/16 inches, Pad 1-15/64 inch wide x 3-11/32 inch long x 19/64 inch thick. (2) 9/16 inch Diameter holes on 1-3/4 inch centers. Oxide Inhibitor. Red Cap.

Contact for Pricing

Minimum Qty: 25

Multiplier: 25

*Contact for lower quantities*

ABB - Installation Products GLE 3/0 N - Aluminum Two-Hole Non-Tension Compression Lug - Wire Size 3/0 Stranded-Compressed-Compact. Length 59/32 inch. Pad 1-1/8 inch wide x 3-1/8 inch long x 9/32 inch thick. (2) Holes 9/16 inch Diameter on 1-3/4 inch Center. Barrel 1-15/32 inch long. Oxide Inhibitor with Black Cap. Dies CSA24, 702, 298. Dual Rated for Aluminum and Copper Conductors
ABB - Installation Products · ABB

GLE 3/0 N


Aluminum Two-Hole Non-Tension Compression Lug - Wire Size 3/0 Stranded-Compressed-Compact. Length 59/32 inch. Pad 1-1/8 inch wide x 3-1/8 inch long x 9/32 inch thick. (2) Holes 9/16 inch Diameter on 1-3/4 inch Center. Barrel 1-15/32 inch long. Oxide Inhibitor with Black Cap. Dies CSA24, 702, 298. Dual Rated for Aluminum and Copper Conductors

Contact for Pricing

Minimum Qty: 100

Multiplier: 100

*Contact for lower quantities*

Panduit EDNF14-250FIB-L - StrongHold Female Disconnect, nylon fully insulated, 16 - 14 AWG, .250 X .032 tab size.

StrongHold Female Disconnect, nylon fully insulated, 16 - 14 AWG, .250 X .032 tab size.

Contact for Pricing

Minimum Qty: 500

Multiplier: 50

*Contact for lower quantities*

Panduit EDNF10-250FI-Q - StrongHold Female Disconnect, nylon fully insulated, 12 - 10 AWG, .250 x .032 tab size.

StrongHold Female Disconnect, nylon fully insulated, 12 - 10 AWG, .250 x .032 tab size.

Contact for Pricing

Minimum Qty: 250

Multiplier: 25

*Contact for lower quantities*

Showing 289-300 of 3,357 results