All Categories

Electrical Systems and Lighting and Components and Accessories and Supplies

Electrical Equipment, Components, and Supplies

Electrical Lugs Plugs And Connectors

Subcategories

    Automatic Wire Or Cable Connector

    Backshell connectors

    Battery Terminal

    Cable Gland Connector

    Cable Joint

    Cable Or Wire Lug

    Circular Connectors

    Coaxial Connectors

    Connecting Leads or Wires

    Connector And Cable Seal

    Crab Joint

    Electrical Connector Assembly

    Electrical Extension Cable

    Electrical Metallic Tubing Emt Connectors

    Electrical Metallic Tubing Emt Elbow

    Electrical plug/receptacle adapter

    Electrical Plugs

    Electrical Receptacles

    Electrical Sleeves

    Electrical Taps

    Electrical Terminals

    Electrical Underground Bus Connector

    Electrodes

    Electronic Connector Caps

    Flex Connectors

    Flexible Braid

    Heavy Duty Connector Hood & Housing

    Heavy Duty Connector Insert & Contact

    Input Output Connector Cover

    Jack for Plug

    Jumper Bar

    Liquid Tight Connectors

    Locking Plug

    Mechanical Connector Lug and Cap

    Mechanical Connectors

    Panel Interface Connector

    Power Distribution Blocks

    Printed Circuit Board Pcb Press Fit Header Connector

    Rj Jack And Module

    Tap Off

    Telecommunication Connector

    Terminal Block Accessories

    Terminal Block Covers

    Terminal Block Markers and Marking Accessories

    Terminal Block Separator

    Terminal Blocks

    Terminal Strips

    Twist On Wire Connector

    Wire Connectors

    Wire Or Cable Compression Connector

    Wire Or Cable Compression Reducer

    Wire Or Cable Compression Splice

    Wire Terminal Connector Kit

    Wire Terminal Disconnect

    Wiring Taps

Showing 2869-2880 of 3,357 results

ABB - Installation Products AL 4/0 NGSH - Aluminum Two-Hole NEMA Lugs - Straight Lug, Concentric 4/0 Stranded AL-CU, Installing Dies TX ,71H, 298, 840, 11A. Length 6 inch. Pad 1-3/16 inch wide x 3-11/32 inch long x 5/16 inch thick. Barrel 1-15/16 inch long x 7/8 inch Outside Diameter. (2) 9/16 inch Diameter holes on 1-3/4 inch centers. Oxide Inhibitor. Pink Cap. Includes Galvanized Steel Hardware (2) 1/2-13 x 1-1/2 full Threaded Bolts, (2) 1/2-13 Nuts, (4) 1/2 Flat Washers and (2) Stainless Steel 1/2 inch Belleville Washers.
ABB - Installation Products · ABB

AL 4/0 NGSH


Aluminum Two-Hole NEMA Lugs - Straight Lug, Concentric 4/0 Stranded AL-CU, Installing Dies TX ,71H, 298, 840, 11A. Length 6 inch. Pad 1-3/16 inch wide x 3-11/32 inch long x 5/16 inch thick. Barrel 1-15/16 inch long x 7/8 inch Outside Diameter. (2) 9/16 inch Diameter holes on 1-3/4 inch centers. Oxide Inhibitor. Pink Cap. Includes Galvanized Steel Hardware (2) 1/2-13 x 1-1/2 full Threaded Bolts, (2) 1/2-13 Nuts, (4) 1/2 Flat Washers and (2) Stainless Steel 1/2 inch Belleville Washers.

Contact for Pricing

Minimum Qty: 650

Multiplier: 650

*Contact for lower quantities*

ABB - Installation Products SA 4/0 N 90 - Aluminum Two-Hole Lugs. Wire Range 4/0 Stranded - ACSR, 120 mm2, 300 Compact, 250 kcmil Stranded - Compressed - Compact AL-CU, Installing dies TX, 76, 249, 840, 845, CSA24, 11A. Length before Bending 6 Inches. Pad 1-7/32 nch wide x 3-3/8 inch long x 19/64 inch thick. (2) 9/16 inch diameter holes on 1-3/4 inch centers. Barrel 3 inch. Oxide Inhibitor. Pink Cap.
ABB - Installation Products · ABB

SA 4/0 N 90


Aluminum Two-Hole Lugs. Wire Range 4/0 Stranded - ACSR, 120 mm2, 300 Compact, 250 kcmil Stranded - Compressed - Compact AL-CU, Installing dies TX, 76, 249, 840, 845, CSA24, 11A. Length before Bending 6 Inches. Pad 1-7/32 nch wide x 3-3/8 inch long x 19/64 inch thick. (2) 9/16 inch diameter holes on 1-3/4 inch centers. Barrel 3 inch. Oxide Inhibitor. Pink Cap.

Contact for Pricing

ABB - Installation Products L 500 N-7 - Tin Plated Copper Two-Hole Straight NEMA Lugs. wire size 500 kcmil CU. Installing Dies 1, 87, 251, 20. Length 10-7/8 inch. Pad 1-33/64 inch wide x 3-1/16 inch long x 7/32 inch thick. (2) 9/16 inch holes on 1-3/4 inch center. Barrel 7 inch.
ABB - Installation Products · ABB

L 500 N-7


Tin Plated Copper Two-Hole Straight NEMA Lugs. wire size 500 kcmil CU. Installing Dies 1, 87, 251, 20. Length 10-7/8 inch. Pad 1-33/64 inch wide x 3-1/16 inch long x 7/32 inch thick. (2) 9/16 inch holes on 1-3/4 inch center. Barrel 7 inch.

Contact for Pricing

ABB - Installation Products AL 500 N 24 HS - Aluminum Two-Hole NEMA Lugs - straight lug, 477-500 kcmil and 500-600 Compact AL-CU and ACSR 397.5 (26/7) and 477 (18/1), installing dies 106A, 300, 317, 1 5/16, 14A, 15A. Length 24 inch. Pad 1-3/4 inch wide x 3-9/16 inch long x 29/64 inch thick. Barrel 19-5/8 inch long x 1-5/16 inch Outside Diameter. (2) 9/16 inch diameter holes on 1-3/4 inch centers. Oxide Inhibitor. Piink Cap. Includes Heat Shrink.
ABB - Installation Products · ABB

AL 500 N 24 HS


Aluminum Two-Hole NEMA Lugs - straight lug, 477-500 kcmil and 500-600 Compact AL-CU and ACSR 397.5 (26/7) and 477 (18/1), installing dies 106A, 300, 317, 1 5/16, 14A, 15A. Length 24 inch. Pad 1-3/4 inch wide x 3-9/16 inch long x 29/64 inch thick. Barrel 19-5/8 inch long x 1-5/16 inch Outside Diameter. (2) 9/16 inch diameter holes on 1-3/4 inch centers. Oxide Inhibitor. Piink Cap. Includes Heat Shrink.

Contact for Pricing

Minimum Qty: 20

Multiplier: 20

*Contact for lower quantities*

ABB - Installation Products L 600 N-7 - Tin Plated Copper Two-Hole Straight NEMA Lugs. wire size 600 kcmil CU. Installing Dies 96, 22, 1, 1/8-1. Length 11-5/32 inch. Pad 1-23/32 inch wide x 3-1/8 inch long x 1/2 inch thick. (2) 9/16 inch holes on 1-3/4 inch center. Barrel 7 inch.
ABB - Installation Products · ABB

L 600 N-7


Tin Plated Copper Two-Hole Straight NEMA Lugs. wire size 600 kcmil CU. Installing Dies 96, 22, 1, 1/8-1. Length 11-5/32 inch. Pad 1-23/32 inch wide x 3-1/8 inch long x 1/2 inch thick. (2) 9/16 inch holes on 1-3/4 inch center. Barrel 7 inch.

Contact for Pricing

ABB - Installation Products AL 1250 NGSH - Aluminum Compression Lug, 1200-1300 kcmil, Aluminum and Copper, ACSR 1113 (45/7) 1192.5 (45/7). Dies 161, 727, 352. Two Hole NEMA Pad with 9/16 inch Diameter Holes on 1-3/4 inch Centers. Includes Galvanized Steel Hardware (2) 1/2-13 x 2 inch Full Threaded Bolts, (2) 1/2-13 Nuts, (4) 1/2 Flat Washers and (2) Stainless Steel 1/2 inch Belleville Washers. Length 9-11/16 inch. Pad 2-17/64 inch wide x 3-5/8 inch long x 39/64 inch thick. Barrel 4-11/16 inch long. 1-31/32 inch Outside Diameter.
ABB - Installation Products · ABB

AL 1250 NGSH


Aluminum Compression Lug, 1200-1300 kcmil, Aluminum and Copper, ACSR 1113 (45/7) 1192.5 (45/7). Dies 161, 727, 352. Two Hole NEMA Pad with 9/16 inch Diameter Holes on 1-3/4 inch Centers. Includes Galvanized Steel Hardware (2) 1/2-13 x 2 inch Full Threaded Bolts, (2) 1/2-13 Nuts, (4) 1/2 Flat Washers and (2) Stainless Steel 1/2 inch Belleville Washers. Length 9-11/16 inch. Pad 2-17/64 inch wide x 3-5/8 inch long x 39/64 inch thick. Barrel 4-11/16 inch long. 1-31/32 inch Outside Diameter.

Contact for Pricing

ABB - Installation Products AL 1000 NGSH - Aluminum Two-Hole NEMA Lug - Straight Lug, 954 to 1000 kcmil AL-CU, ACSR 795 (26/7,30/19) and 954 (45/7), installing dies 161, 292, 302, 319, 1 3/4. Length 9-11/16 inch, Pad Width 2-7/16 inch x 3-41/64 inch long x 41/64 inch Thick. Holes on 1-3/4 inch Center to Center Spacing. Bore 4-5/8 inch Deep. Includes Galvanized Steel Hardware (2) Bolts 1/2-13 x 2 Full Thread, (2) 1/2-13 Nuts, (4) 1/2 inch Flat Washer, and (2) Stainless Steel Belleville 1/2 inch Washers.
ABB - Installation Products · ABB

AL 1000 NGSH


Aluminum Two-Hole NEMA Lug - Straight Lug, 954 to 1000 kcmil AL-CU, ACSR 795 (26/7,30/19) and 954 (45/7), installing dies 161, 292, 302, 319, 1 3/4. Length 9-11/16 inch, Pad Width 2-7/16 inch x 3-41/64 inch long x 41/64 inch Thick. Holes on 1-3/4 inch Center to Center Spacing. Bore 4-5/8 inch Deep. Includes Galvanized Steel Hardware (2) Bolts 1/2-13 x 2 Full Thread, (2) 1/2-13 Nuts, (4) 1/2 inch Flat Washer, and (2) Stainless Steel Belleville 1/2 inch Washers.

Contact for Pricing

ABB - Installation Products AL 4/0 NTN 45 - Aluminum Tin-Plated Two-Hole NEMA Lugs - 45 degree lug, concentric 4/0 Stranded AL-CU, installing dies TX, 76, 249, 840, 11A. Unbent length 6-3/8, Barrel 1-15/16 inches, Pad 3 inch minimum length x 1-3/16 inch wide x 5/16 inch thick. (2) 9/16 inch Diameter holes on 1-3/4 inch centers. Oxide Inhibitor. White Cap.
ABB - Installation Products · ABB

AL 4/0 NTN 45


Aluminum Tin-Plated Two-Hole NEMA Lugs - 45 degree lug, concentric 4/0 Stranded AL-CU, installing dies TX, 76, 249, 840, 11A. Unbent length 6-3/8, Barrel 1-15/16 inches, Pad 3 inch minimum length x 1-3/16 inch wide x 5/16 inch thick. (2) 9/16 inch Diameter holes on 1-3/4 inch centers. Oxide Inhibitor. White Cap.

Contact for Pricing

ABB - Installation Products CCAL 800 N - Tin Plated Aluminum Compression Lug, 800 kcmil CCA, (1252/22), Length 8 inches. Pad 1-3/4 inch wide x 3-5/8 nch long x 21/32 inch thick. (2) 9/32 inch Radius Slots on 1-3/4 inch centers. Bolt size 1/2 inch. Barrel 3 inch long x 1-47/64 inch outside diameter. Installing Dies 150, 302, 115X. Oxide Inhibitor. Brown Cap. CCA9 UL listed.
ABB - Installation Products · ABB

CCAL 800 N


Tin Plated Aluminum Compression Lug, 800 kcmil CCA, (1252/22), Length 8 inches. Pad 1-3/4 inch wide x 3-5/8 nch long x 21/32 inch thick. (2) 9/32 inch Radius Slots on 1-3/4 inch centers. Bolt size 1/2 inch. Barrel 3 inch long x 1-47/64 inch outside diameter. Installing Dies 150, 302, 115X. Oxide Inhibitor. Brown Cap. CCA9 UL listed.

Contact for Pricing

ABB - Installation Products AL 2300-4 NEHV - Aluminum Tapered Compression Lug, 2250-2300 kcmil, Aluminum and Copper, 2167 (72/7) ACSR, Installing Die 48AH. Length 15-1/2 inch. Rounded Front Pad 4 inch x 4 inch x 1 inch thick. (4) 9/16 inch Diameter Holes with 1-3/4 inch Spacing, NEMA Pad. For Extra High Voltage.
ABB - Installation Products · ABB

AL 2300-4 NEHV


Aluminum Tapered Compression Lug, 2250-2300 kcmil, Aluminum and Copper, 2167 (72/7) ACSR, Installing Die 48AH. Length 15-1/2 inch. Rounded Front Pad 4 inch x 4 inch x 1 inch thick. (4) 9/16 inch Diameter Holes with 1-3/4 inch Spacing, NEMA Pad. For Extra High Voltage.

Contact for Pricing

Minimum Qty: 3

Multiplier: 3

*Contact for lower quantities*

ABB - Installation Products AL 350 N 20 HS - Aluminum Two-Hole NEMA Lugs - straight lug, 336.4 - 350 kcmil AL-CU, ACSR 266.8 (26/7) and 336.4 (18/1), installing dies 96, 299, 655, 1 1/8-1, 705, 13A. Length 20 inch. Pad 1-1/2 inch wide x 3-9/16 inch long x 3/8 inch thick. (2) 9/16 inch diameter holes on 1-3/4 inch centers. Barrel 15-5/8 inch x 1-7/64 inch Outside Diameter. Oxide Inhibitor. Brown Cap. Includes FloodSeal Insulating Sleeve, Silicone Grease Pack and Heat Shrink.
ABB - Installation Products · ABB

AL 350 N 20 HS


Aluminum Two-Hole NEMA Lugs - straight lug, 336.4 - 350 kcmil AL-CU, ACSR 266.8 (26/7) and 336.4 (18/1), installing dies 96, 299, 655, 1 1/8-1, 705, 13A. Length 20 inch. Pad 1-1/2 inch wide x 3-9/16 inch long x 3/8 inch thick. (2) 9/16 inch diameter holes on 1-3/4 inch centers. Barrel 15-5/8 inch x 1-7/64 inch Outside Diameter. Oxide Inhibitor. Brown Cap. Includes FloodSeal Insulating Sleeve, Silicone Grease Pack and Heat Shrink.

Contact for Pricing

ABB - Installation Products AL 100 MMNTN 45 - Tin Plated, Aluminum Compression Lug with 45 Degree Bend, 100 mm2 ACSR, Bolt Holes 9/16 inch Diameter, Two Hole NEMA Pad with 1-3/4 inch Center to Center Spacing. Length 6-3/8 inches before Bending, Bore 19/32 inch Diameter x 1-15/16 inch Deep. Pad 3 inch long x 1-15/64 inch wide x 19/64 inch thick. Oxide Inhibitor. Red Cap. Tin Plated Finish. Dies 324 (U29ART). Dual Rated for Aluminum and Copper Conductors
ABB - Installation Products · ABB

AL 100 MMNTN 45


Tin Plated, Aluminum Compression Lug with 45 Degree Bend, 100 mm2 ACSR, Bolt Holes 9/16 inch Diameter, Two Hole NEMA Pad with 1-3/4 inch Center to Center Spacing. Length 6-3/8 inches before Bending, Bore 19/32 inch Diameter x 1-15/16 inch Deep. Pad 3 inch long x 1-15/64 inch wide x 19/64 inch thick. Oxide Inhibitor. Red Cap. Tin Plated Finish. Dies 324 (U29ART). Dual Rated for Aluminum and Copper Conductors

Contact for Pricing

Showing 2869-2880 of 3,357 results