All Categories

Electrical Systems and Lighting and Components and Accessories and Supplies

Electrical Equipment, Components, and Supplies

Electrical Lugs Plugs And Connectors

Subcategories

    Automatic Wire Or Cable Connector

    Backshell connectors

    Battery Terminal

    Cable Gland Connector

    Cable Joint

    Cable Or Wire Lug

    Circular Connectors

    Coaxial Connectors

    Connecting Leads or Wires

    Connector And Cable Seal

    Crab Joint

    Electrical Connector Assembly

    Electrical Extension Cable

    Electrical Metallic Tubing Emt Connectors

    Electrical Metallic Tubing Emt Elbow

    Electrical plug/receptacle adapter

    Electrical Plugs

    Electrical Receptacles

    Electrical Sleeves

    Electrical Taps

    Electrical Terminals

    Electrical Underground Bus Connector

    Electrodes

    Electronic Connector Caps

    Flex Connectors

    Flexible Braid

    Heavy Duty Connector Hood & Housing

    Heavy Duty Connector Insert & Contact

    Input Output Connector Cover

    Jack for Plug

    Jumper Bar

    Liquid Tight Connectors

    Locking Plug

    Mechanical Connector Lug and Cap

    Mechanical Connectors

    Panel Interface Connector

    Power Distribution Blocks

    Printed Circuit Board Pcb Press Fit Header Connector

    Rj Jack And Module

    Tap Off

    Telecommunication Connector

    Terminal Block Accessories

    Terminal Block Covers

    Terminal Block Markers and Marking Accessories

    Terminal Block Separator

    Terminal Blocks

    Terminal Strips

    Twist On Wire Connector

    Wire Connectors

    Wire Or Cable Compression Connector

    Wire Or Cable Compression Reducer

    Wire Or Cable Compression Splice

    Wire Terminal Connector Kit

    Wire Terminal Disconnect

    Wiring Taps

Showing 2677-2688 of 3,357 results

ABB - Installation Products PT 6487 OF - Tin Plated Aluminum Pin Terminal. Pin .364 Diameter, 10 inch length, with (2) 90 Degrees bends. Side Lengths 4.937, 3.250 and 3.00 inches. Body 2.625 Length x .906 inch Diameter, Bores .347 Diameter x 1.062 inch long for the Tap 3/8-16 UNC-2B Threaded Stud, and .420 Diameter x 1.0 inch long. Red Caps.
ABB - Installation Products · ABB

PT 6487 OF


Tin Plated Aluminum Pin Terminal. Pin .364 Diameter, 10 inch length, with (2) 90 Degrees bends. Side Lengths 4.937, 3.250 and 3.00 inches. Body 2.625 Length x .906 inch Diameter, Bores .347 Diameter x 1.062 inch long for the Tap 3/8-16 UNC-2B Threaded Stud, and .420 Diameter x 1.0 inch long. Red Caps.

Contact for Pricing

Minimum Qty: 25

Multiplier: 25

*Contact for lower quantities*

ABB - Installation Products ABP 2500 A - Aluminum Overhead Transformer Eyebolt Multi-Tap Set Screw Connectors, length 3-5/8 inch, stud size 3/4 X 4 1/2, cable range 6-500, outlets 2. A - Anodized Screw.
ABB - Installation Products · ABB

ABP 2500 A


Aluminum Overhead Transformer Eyebolt Multi-Tap Set Screw Connectors, length 3-5/8 inch, stud size 3/4 X 4 1/2, cable range 6-500, outlets 2. A - Anodized Screw.

Contact for Pricing

ABB - Installation Products ABP 5350 C - Aluminum Overhead Transformer Eyebolt Multi-tap Set Screw Connector With Oxide Inhibitor - Length 5-5/16 Inch, Stud Size 5/8 X 4 , Cable Range #12-350 kcmil, Outlets 5
ABB - Installation Products · ABB

ABP 5350 C


Aluminum Overhead Transformer Eyebolt Multi-tap Set Screw Connector With Oxide Inhibitor - Length 5-5/16 Inch, Stud Size 5/8 X 4 , Cable Range #12-350 kcmil, Outlets 5

Contact for Pricing

ABB - Installation Products AL 2000-4 NEHV - Aluminum Tapered Compression Lug for Extra High Voltage, 1510.5-1590 kcmil ACSR, 1700-2000 kcmil Stranded, Aluminum and Copper, Dies 214 735 40AH, 225. Four Hole NEMA Pad 9/16 inch Diameter on 1-3/4 inch Centers. Length 12-1/8 inch. Pad 3-1/2 inch wide x 3-3/4 inch long x 29/32 inch thick. Barrel 6-11/16 inch x 2-19/32 inch Outside Diameter. Oxide Inhibitor. Orange Cap.
ABB - Installation Products · ABB

AL 2000-4 NEHV


Aluminum Tapered Compression Lug for Extra High Voltage, 1510.5-1590 kcmil ACSR, 1700-2000 kcmil Stranded, Aluminum and Copper, Dies 214 735 40AH, 225. Four Hole NEMA Pad 9/16 inch Diameter on 1-3/4 inch Centers. Length 12-1/8 inch. Pad 3-1/2 inch wide x 3-3/4 inch long x 29/32 inch thick. Barrel 6-11/16 inch x 2-19/32 inch Outside Diameter. Oxide Inhibitor. Orange Cap.

Contact for Pricing

Minimum Qty: 480

Multiplier: 480

*Contact for lower quantities*

ABB - Installation Products AL 1000 NCPTN - Tin Plated, Aluminum Two-Hole NEMA Lug - straight lug, 1000 kcmil Compact AL-CU, installing dies 140H, 301, 342, 1 1/2. Length 8-9/16 inch, Pad Width 1-3/4 inch x 3-41/64 inch long x 35/64 inch Thick. Holes on 1-3/4 inch Center to Center Spacing. Bore 3-13/16 inch Deep. Oxide Inhibitor, Brown Cap.
ABB - Installation Products · ABB

AL 1000 NCPTN


Tin Plated, Aluminum Two-Hole NEMA Lug - straight lug, 1000 kcmil Compact AL-CU, installing dies 140H, 301, 342, 1 1/2. Length 8-9/16 inch, Pad Width 1-3/4 inch x 3-41/64 inch long x 35/64 inch Thick. Holes on 1-3/4 inch Center to Center Spacing. Bore 3-13/16 inch Deep. Oxide Inhibitor, Brown Cap.

Contact for Pricing

Minimum Qty: 150

Multiplier: 150

*Contact for lower quantities*

ABB - Installation Products AL 2-14 TN - Tin-Plated Aluminum Compression Lug for Aluminum and Copper Terminations, One-Hole NEMA Pad, #2 Stranded AL9CU, Dies TQ, 45, 348, 163, 1/2, 6A. Length 2-5/8 inch. Pad 3/4 inch wide x 1 inch long x 5/32 inch thick. Barrel 59/64 inch Long x 17/32 inch Outside Diameter. Oxide Inhibitor. Pink Cap.
ABB - Installation Products · ABB

AL 2-14 TN


Tin-Plated Aluminum Compression Lug for Aluminum and Copper Terminations, One-Hole NEMA Pad, #2 Stranded AL9CU, Dies TQ, 45, 348, 163, 1/2, 6A. Length 2-5/8 inch. Pad 3/4 inch wide x 1 inch long x 5/32 inch thick. Barrel 59/64 inch Long x 17/32 inch Outside Diameter. Oxide Inhibitor. Pink Cap.

Contact for Pricing

Minimum Qty: 200

Multiplier: 200

*Contact for lower quantities*

ABB - Installation Products AL 2-48 - Aluminum One-Hole NEMA Lugs, concentric 2 Stranded AL-CU, bolt size 1/2, installing dies TQ, 45, 348, 163, 1/2, 6A. Length 2-5/8 inch. Pad 3/4 inch wide x 1-1/8 inch long x 5/32 inch thick. Single Hole 17/32 inch Diameter. Barrel 59/64 inch. Outside Diameter 17/32 inch. Oxide Inhibitor. Red Cap.
ABB - Installation Products · ABB

AL 2-48


Aluminum One-Hole NEMA Lugs, concentric 2 Stranded AL-CU, bolt size 1/2, installing dies TQ, 45, 348, 163, 1/2, 6A. Length 2-5/8 inch. Pad 3/4 inch wide x 1-1/8 inch long x 5/32 inch thick. Single Hole 17/32 inch Diameter. Barrel 59/64 inch. Outside Diameter 17/32 inch. Oxide Inhibitor. Red Cap.

Contact for Pricing

Minimum Qty: 200

Multiplier: 200

*Contact for lower quantities*

ABB - Installation Products AL 2-48 TN - Tin Plated Aluminum One-Hole NEMA Lugs, concentric 2 Stranded AL9CU, bolt size 1/2, installing dies TQ, 45, 348, 163, 1/2, 6A. Length 2-5/8 inch. Pad 3/4 inch wide x 1-1/8 inch long x 5/32 inch thick. Single Hole 17/32 inch Diameter. Barrel 59/64 inch. Outside Diameter 17/32 inch. Oxide Inhibitor. Pink Cap. UL Listed.
ABB - Installation Products · ABB

AL 2-48 TN


Tin Plated Aluminum One-Hole NEMA Lugs, concentric 2 Stranded AL9CU, bolt size 1/2, installing dies TQ, 45, 348, 163, 1/2, 6A. Length 2-5/8 inch. Pad 3/4 inch wide x 1-1/8 inch long x 5/32 inch thick. Single Hole 17/32 inch Diameter. Barrel 59/64 inch. Outside Diameter 17/32 inch. Oxide Inhibitor. Pink Cap. UL Listed.

Contact for Pricing

Minimum Qty: 200

Multiplier: 200

*Contact for lower quantities*

ABB - Installation Products AL 250-48 TN - Tin-Plated Aluminum One-Hole NEMA Lugs, concentric 250 kcmil AL9CU and 4/0 Stranded ACSR, 120 MM2, bolt size 1/2, installing dies TX, 76, 249, 840, 11A. Length 3-5/8 inch. Pad 1-15/64 inch wide x 1-5/16 inch long x 19/64 inch thick. Barrel 1-9/16 inch long x 29/32 inch Outside Diameter. Oxide Inhibitor. Red Cap.
ABB - Installation Products · ABB

AL 250-48 TN


Tin-Plated Aluminum One-Hole NEMA Lugs, concentric 250 kcmil AL9CU and 4/0 Stranded ACSR, 120 MM2, bolt size 1/2, installing dies TX, 76, 249, 840, 11A. Length 3-5/8 inch. Pad 1-15/64 inch wide x 1-5/16 inch long x 19/64 inch thick. Barrel 1-9/16 inch long x 29/32 inch Outside Diameter. Oxide Inhibitor. Red Cap.

Contact for Pricing

Minimum Qty: 100

Multiplier: 100

*Contact for lower quantities*

ABB - Installation Products AL 3/0-38 TN - Tin-Plated Aluminum Compression Lug for Aluminum and Copper Terminations, One-Hole NEMA Pad, 3/0 Stranded AL9CU, 3/8 inch Bolt, Installing Dies TV, 66, 167, 467, 10A. UL Listed. Length 3-7/16 inch. Pad 1 inch Wide x 1-9/32 inch long x 1/4 inch thick. (1) 13/32 inch Diameter hole. Barrel 1-1/2 inch x 3/4 inch Outside Diameter. Oxide Inhibitor. Ruby Cap.
ABB - Installation Products · ABB

AL 3/0-38 TN


Tin-Plated Aluminum Compression Lug for Aluminum and Copper Terminations, One-Hole NEMA Pad, 3/0 Stranded AL9CU, 3/8 inch Bolt, Installing Dies TV, 66, 167, 467, 10A. UL Listed. Length 3-7/16 inch. Pad 1 inch Wide x 1-9/32 inch long x 1/4 inch thick. (1) 13/32 inch Diameter hole. Barrel 1-1/2 inch x 3/4 inch Outside Diameter. Oxide Inhibitor. Ruby Cap.

Contact for Pricing

Minimum Qty: 200

Multiplier: 200

*Contact for lower quantities*

ABB - Installation Products AL 3/0-48 TN - Tin-Plated Aluminum One-Hole NEMA Lugs, concentric 3/0 Stranded AL9CU, bolt size 1/2, installing dies TV, 66, 167, 467, 10A. Length 3-7/16 inch. Pad 1 inch wide x 1-9/32 inch long x 1/4 inch thick. (1) 17/32 inch Diameter Hole. Barrel 1-1/2 inch long x 3/4 inch Outside Diameter. Oxide Inhibitor. Ruby Cap.
ABB - Installation Products · ABB

AL 3/0-48 TN


Tin-Plated Aluminum One-Hole NEMA Lugs, concentric 3/0 Stranded AL9CU, bolt size 1/2, installing dies TV, 66, 167, 467, 10A. Length 3-7/16 inch. Pad 1 inch wide x 1-9/32 inch long x 1/4 inch thick. (1) 17/32 inch Diameter Hole. Barrel 1-1/2 inch long x 3/4 inch Outside Diameter. Oxide Inhibitor. Ruby Cap.

Contact for Pricing

Minimum Qty: 400

Multiplier: 400

*Contact for lower quantities*

ABB - Installation Products AL 350 NLLTN - Tin Plated Aluminum Two-Hole NEMA Lug with 90 Degree Left Configuration. 350 kcmil or 350 Compact AL-CU, Installing dies 96, 299, 655, 1 1/8-1, 13A. Length 5-3/8 inch after Bending. Pad 1-35/64 inch wide x 3 inch minimum length x 23/64 inch thick. (2) 9/16 inch diameter holes on 1-3/4 inch centers. Barrel 2-9/16 inch x 1-7/64 inch Outside Diameter. Oxide Inhibitor. Brown Cap.
ABB - Installation Products · ABB

AL 350 NLLTN


Tin Plated Aluminum Two-Hole NEMA Lug with 90 Degree Left Configuration. 350 kcmil or 350 Compact AL-CU, Installing dies 96, 299, 655, 1 1/8-1, 13A. Length 5-3/8 inch after Bending. Pad 1-35/64 inch wide x 3 inch minimum length x 23/64 inch thick. (2) 9/16 inch diameter holes on 1-3/4 inch centers. Barrel 2-9/16 inch x 1-7/64 inch Outside Diameter. Oxide Inhibitor. Brown Cap.

Contact for Pricing

Minimum Qty: 50

Multiplier: 50

*Contact for lower quantities*

Showing 2677-2688 of 3,357 results