All Categories

Electrical Systems and Lighting and Components and Accessories and Supplies

Electrical Equipment, Components, and Supplies

Electrical Lugs Plugs And Connectors

Subcategories

    Automatic Wire Or Cable Connector

    Backshell connectors

    Battery Terminal

    Cable Gland Connector

    Cable Joint

    Cable Or Wire Lug

    Circular Connectors

    Coaxial Connectors

    Connecting Leads or Wires

    Connector And Cable Seal

    Crab Joint

    Electrical Connector Assembly

    Electrical Extension Cable

    Electrical Metallic Tubing Emt Connectors

    Electrical Metallic Tubing Emt Elbow

    Electrical plug/receptacle adapter

    Electrical Plugs

    Electrical Receptacles

    Electrical Sleeves

    Electrical Taps

    Electrical Terminals

    Electrical Underground Bus Connector

    Electrodes

    Electronic Connector Caps

    Flex Connectors

    Flexible Braid

    Heavy Duty Connector Hood & Housing

    Heavy Duty Connector Insert & Contact

    Input Output Connector Cover

    Jack for Plug

    Jumper Bar

    Liquid Tight Connectors

    Locking Plug

    Mechanical Connector Lug and Cap

    Mechanical Connectors

    Panel Interface Connector

    Power Distribution Blocks

    Printed Circuit Board Pcb Press Fit Header Connector

    Rj Jack And Module

    Tap Off

    Telecommunication Connector

    Terminal Block Accessories

    Terminal Block Covers

    Terminal Block Markers and Marking Accessories

    Terminal Block Separator

    Terminal Blocks

    Terminal Strips

    Twist On Wire Connector

    Wire Connectors

    Wire Or Cable Compression Connector

    Wire Or Cable Compression Reducer

    Wire Or Cable Compression Splice

    Wire Terminal Connector Kit

    Wire Terminal Disconnect

    Wiring Taps

Showing 2569-2580 of 3,357 results

ABB - Installation Products SAL 800-4 N 90 - Aluminum Compression Lug Bend at 90 Degrees for Aluminum and Copper Terminations, Four-Hole NEMA Pad, Wire Range 700-800 kcmil AL-CU, 954 Compact, 636(26/7) ACSR. Installing dies 140H, 301, 342, 724, 1 1/2. Length 5-3/4 inch. Welded Pad 3 inch wide x 3 inch long x 1/2 inch thick, (4) 9/16 inch diameter holes on 1-3/4 inch centers, uses 1/2 inch Bolt. Barrel 5-1/4 inch. Oxide Inhibitor. Light Blue Cap.
ABB - Installation Products · ABB

SAL 800-4 N 90


Aluminum Compression Lug Bend at 90 Degrees for Aluminum and Copper Terminations, Four-Hole NEMA Pad, Wire Range 700-800 kcmil AL-CU, 954 Compact, 636(26/7) ACSR. Installing dies 140H, 301, 342, 724, 1 1/2. Length 5-3/4 inch. Welded Pad 3 inch wide x 3 inch long x 1/2 inch thick, (4) 9/16 inch diameter holes on 1-3/4 inch centers, uses 1/2 inch Bolt. Barrel 5-1/4 inch. Oxide Inhibitor. Light Blue Cap.

Contact for Pricing

Minimum Qty: 60

Multiplier: 60

*Contact for lower quantities*

ABB - Installation Products SAL 800-4 NTN - Tin-Plated Aluminum Compression Lug for Aluminum and Copper Terminations, Four-Hole NEMA Pad, Wire Range 700-800 kcmil AL-CU, 954 Compact, 636(26/7) ACSR. Installing dies 140H, 301, 342, 1 1/2. Length 8-3/4 inch. Pad 3 inch wide x 3-5/16 inch long x 1/2 inch thick, (4) 9/16 inch diameter holes on 1-3/4 inch centers, uses 1/2 inch Bolt. Barrel 4-9/32 inch. Oxide Inhibitor. Light Blue Cap.
ABB - Installation Products · ABB

SAL 800-4 NTN


Tin-Plated Aluminum Compression Lug for Aluminum and Copper Terminations, Four-Hole NEMA Pad, Wire Range 700-800 kcmil AL-CU, 954 Compact, 636(26/7) ACSR. Installing dies 140H, 301, 342, 1 1/2. Length 8-3/4 inch. Pad 3 inch wide x 3-5/16 inch long x 1/2 inch thick, (4) 9/16 inch diameter holes on 1-3/4 inch centers, uses 1/2 inch Bolt. Barrel 4-9/32 inch. Oxide Inhibitor. Light Blue Cap.

Contact for Pricing

ABB - Installation Products SAM 300-4 NTN - Tin Plated Aluminum Compression Lug for Aluminum and Copper Terminations, Four-Hole NEMA Pad, Wire Range 300 kcmil AL-CU. Installing dies 106, 300, 317, 1 5/16, 15A, 6020AH. Length 7-5/8 inch. Welded Pad 3 inch wide x 3 inch long x 5/8 inch thick, (4) 9/16 inch diameter holes on 1-3/4 inch centers, uses 1/2 inch Bolt. Barrel 3-7/8 inch. Oxide Inhibitor. Blue Cap.
ABB - Installation Products · ABB

SAM 300-4 NTN


Tin Plated Aluminum Compression Lug for Aluminum and Copper Terminations, Four-Hole NEMA Pad, Wire Range 300 kcmil AL-CU. Installing dies 106, 300, 317, 1 5/16, 15A, 6020AH. Length 7-5/8 inch. Welded Pad 3 inch wide x 3 inch long x 5/8 inch thick, (4) 9/16 inch diameter holes on 1-3/4 inch centers, uses 1/2 inch Bolt. Barrel 3-7/8 inch. Oxide Inhibitor. Blue Cap.

Contact for Pricing

ABB - Installation Products SASL 4/0-48 TN - Tin-Plated Aluminum One-Hole Lugs - common die series - Stacking lugs, 4/0 Stranded ACSR, 250 Compact, Installing dies TX, 76, 249, 840, CSA 24. Length 3-1/2 inch. Pad 1-15/64 inch wide x 1-3/16 inch long x 19/64 inch thick. (1) 17/32 inch hole. Barrel 1-7/16 inch long x 29/32 inch outside Diameter. Oxide Inhibitor. Pink Cap. Dual Rated for use with Aluminum and Copper Conductors.
ABB - Installation Products · ABB

SASL 4/0-48 TN


Tin-Plated Aluminum One-Hole Lugs - common die series - Stacking lugs, 4/0 Stranded ACSR, 250 Compact, Installing dies TX, 76, 249, 840, CSA 24. Length 3-1/2 inch. Pad 1-15/64 inch wide x 1-3/16 inch long x 19/64 inch thick. (1) 17/32 inch hole. Barrel 1-7/16 inch long x 29/32 inch outside Diameter. Oxide Inhibitor. Pink Cap. Dual Rated for use with Aluminum and Copper Conductors.

Contact for Pricing

Minimum Qty: 100

Multiplier: 100

*Contact for lower quantities*

ABB - Installation Products SAM 350-4 N - Aluminum Compression Lug for Aluminum and Copper Terminations, Four-Hole NEMA Pad, Wire Range 336.4-350 kcmil AL-CU, 266.8(26/7) or 336.4 (18/1) ACSR. Installing dies 106, 300, 317, 1 5/16, 15A, 6020AH. Length 7-5/8 inch. Welded Pad 3 inch wide x 3 inch long x 5/8 inch thick, (4) 9/16 inch diameter holes on 1-3/4 inch centers, uses 1/2 inch Bolt. Barrel 3-7/8 inch. Oxide Inhibitor. Brown Cap.
ABB - Installation Products · ABB

SAM 350-4 N


Aluminum Compression Lug for Aluminum and Copper Terminations, Four-Hole NEMA Pad, Wire Range 336.4-350 kcmil AL-CU, 266.8(26/7) or 336.4 (18/1) ACSR. Installing dies 106, 300, 317, 1 5/16, 15A, 6020AH. Length 7-5/8 inch. Welded Pad 3 inch wide x 3 inch long x 5/8 inch thick, (4) 9/16 inch diameter holes on 1-3/4 inch centers, uses 1/2 inch Bolt. Barrel 3-7/8 inch. Oxide Inhibitor. Brown Cap.

Contact for Pricing

Minimum Qty: 10

Multiplier: 10

*Contact for lower quantities*

ABB - Installation Products SAM 400-4 N - Aluminum Compression Lug for Aluminum and Copper Terminations, Four-Hole NEMA Pad, Wire Range 336.4(30/7), 397.5(18/1) ACSR, 397.5-400 Stranded kcmil. Installing dies 106, 300, 317, 1 5/16, 15A, 6020AH. Length 7-7/8 inch. Welded Pad 3 inch wide x 3 inch long x 5/8 inch thick, (4) 9/16 inch diameter holes on 1-3/4 inch center, uses 1/2 inch Bolt. Barrel 4 inch. Oxide Inhibitor. Green Cap.
ABB - Installation Products · ABB

SAM 400-4 N


Aluminum Compression Lug for Aluminum and Copper Terminations, Four-Hole NEMA Pad, Wire Range 336.4(30/7), 397.5(18/1) ACSR, 397.5-400 Stranded kcmil. Installing dies 106, 300, 317, 1 5/16, 15A, 6020AH. Length 7-7/8 inch. Welded Pad 3 inch wide x 3 inch long x 5/8 inch thick, (4) 9/16 inch diameter holes on 1-3/4 inch center, uses 1/2 inch Bolt. Barrel 4 inch. Oxide Inhibitor. Green Cap.

Contact for Pricing

ABB - Installation Products SA 350 N 90 - Aluminum Two-Hole Lugs with 90 Degree Bend - common die series - straight lugs, Wire Range 336.4 - 350 kcmil AL-CU, 185 mm2, 400 Compact, 350 Compressed, 266.8(26/7) and 336.4(18/1) ACSR. Installing dies 96, 299, 655, 321, 316, 13A, 1 1/8-1. Length 6-1/4 inch before bending. Pad 1-1/4 inch wide x 3 inch long x 23/64 inch thick. (2) 9/16 inch Diameter holes on 1-3/4 inch center. Barrel 2-3/16 inch.
ABB - Installation Products · ABB

SA 350 N 90


Aluminum Two-Hole Lugs with 90 Degree Bend - common die series - straight lugs, Wire Range 336.4 - 350 kcmil AL-CU, 185 mm2, 400 Compact, 350 Compressed, 266.8(26/7) and 336.4(18/1) ACSR. Installing dies 96, 299, 655, 321, 316, 13A, 1 1/8-1. Length 6-1/4 inch before bending. Pad 1-1/4 inch wide x 3 inch long x 23/64 inch thick. (2) 9/16 inch Diameter holes on 1-3/4 inch center. Barrel 2-3/16 inch.

Contact for Pricing

Minimum Qty: 100

Multiplier: 100

*Contact for lower quantities*

ABB - Installation Products SNG 02 TN - Tin Plated Aluminum Semi-Tension Neutral Compression Splices - Length 4.250 inches x .640 inch Diameter. Conductor A: ACSR 1/0, Stranded 1/0 Conductor B: ACSR 2, Stranded 2, Dies TU, 52, 5/8, BG, 243, 8A. Includes Oxide Inhibiting Compound and Center Stop. Red and Yellow Caps.
ABB - Installation Products · ABB

SNG 02 TN


Tin Plated Aluminum Semi-Tension Neutral Compression Splices - Length 4.250 inches x .640 inch Diameter. Conductor A: ACSR 1/0, Stranded 1/0 Conductor B: ACSR 2, Stranded 2, Dies TU, 52, 5/8, BG, 243, 8A. Includes Oxide Inhibiting Compound and Center Stop. Red and Yellow Caps.

Contact for Pricing

Minimum Qty: 1050

Multiplier: 1050

*Contact for lower quantities*

ABB - Installation Products URO 24 SP - Aluminum 2-3/4 inch Service Entrance Compression Splice for Wire Range, End A: 2 ACSR, 1-2 Stranded, Orange, End B: 4 ACSR, 3-4 Stranded, 2 Solid, Orange, Die: 5/8, with Seal Plug.
ABB - Installation Products · ABB

URO 24 SP


Aluminum 2-3/4 inch Service Entrance Compression Splice for Wire Range, End A: 2 ACSR, 1-2 Stranded, Orange, End B: 4 ACSR, 3-4 Stranded, 2 Solid, Orange, Die: 5/8, with Seal Plug.

Contact for Pricing

Minimum Qty: 2500

Multiplier: 2500

*Contact for lower quantities*

ABB - Installation Products W 7 A 9 - Bi-Metallic Tin Plated Compression Lug, Comprised of Aluminum Lug and Copper Barrel. Bolt Size 1/2 inch, Two Hole NEMA Pad with 9/16 inch Holes on 1-3/4 inch Center. Pad 3.00 inch x 55/64 inch wide. Wire Size 1/0 Stranded Copper or 1/0 ACSR. Oil Stop. Dies 840, TX, 76, 249, 11A. Includes Oxide Inhibitor Compound, Sealant and Yellow Cap.
ABB - Installation Products · ABB

W 7 A 9


Bi-Metallic Tin Plated Compression Lug, Comprised of Aluminum Lug and Copper Barrel. Bolt Size 1/2 inch, Two Hole NEMA Pad with 9/16 inch Holes on 1-3/4 inch Center. Pad 3.00 inch x 55/64 inch wide. Wire Size 1/0 Stranded Copper or 1/0 ACSR. Oil Stop. Dies 840, TX, 76, 249, 11A. Includes Oxide Inhibitor Compound, Sealant and Yellow Cap.

Contact for Pricing

Minimum Qty: 100

Multiplier: 100

*Contact for lower quantities*

ABB - Installation Products CAM 500 NTN - Tin Plated Aluminum Compression Lug, 477-500 kcmil Stranded, 600 kcmil Compact, 397.5(26/7) or 477(18/1) ACSR. Dies 1 5/16, 106, 300, 317, 14A. Length 7-3/4 inch. NEMA Pad 1-3/4 inch wide x 3-9/16 inch long. Barrel 3-9/16 inch long. Oxide Inhibitor. Pink Cap. For AL-CU Conductors.
ABB - Installation Products · ABB

CAM 500 NTN


Tin Plated Aluminum Compression Lug, 477-500 kcmil Stranded, 600 kcmil Compact, 397.5(26/7) or 477(18/1) ACSR. Dies 1 5/16, 106, 300, 317, 14A. Length 7-3/4 inch. NEMA Pad 1-3/4 inch wide x 3-9/16 inch long. Barrel 3-9/16 inch long. Oxide Inhibitor. Pink Cap. For AL-CU Conductors.

Contact for Pricing

Minimum Qty: 75

Multiplier: 75

*Contact for lower quantities*

ABB - Installation Products SAL 600 NTN - Tin Plated Aluminum Compression Lug for Aluminum and Copper Terminations, Two-Hole NEMA Pad, Wire Range 600 kcmil Stranded AL-CU. Installing dies 140H, 301, 342, 724, 1 1/2, 39ART. Length 8-9/16 inch. Pad 1-19/32 inch wide x 3-21/32 inch long x 9/16 inch thick, (2) 9/16 inch diameter holes on 1-3/4 inch center, uses 1/2 inch Bolt. Barrel 3-19/32 inch. Oxide Inhibitor. Black Cap.
ABB - Installation Products · ABB

SAL 600 NTN


Tin Plated Aluminum Compression Lug for Aluminum and Copper Terminations, Two-Hole NEMA Pad, Wire Range 600 kcmil Stranded AL-CU. Installing dies 140H, 301, 342, 724, 1 1/2, 39ART. Length 8-9/16 inch. Pad 1-19/32 inch wide x 3-21/32 inch long x 9/16 inch thick, (2) 9/16 inch diameter holes on 1-3/4 inch center, uses 1/2 inch Bolt. Barrel 3-19/32 inch. Oxide Inhibitor. Black Cap.

Contact for Pricing

Showing 2569-2580 of 3,357 results