All Categories

Electrical Systems and Lighting and Components and Accessories and Supplies

Electrical Equipment, Components, and Supplies

Electrical Lugs Plugs And Connectors

Subcategories

    Automatic Wire Or Cable Connector

    Backshell connectors

    Battery Terminal

    Cable Gland Connector

    Cable Joint

    Cable Or Wire Lug

    Circular Connectors

    Coaxial Connectors

    Connecting Leads or Wires

    Connector And Cable Seal

    Crab Joint

    Electrical Connector Assembly

    Electrical Extension Cable

    Electrical Metallic Tubing Emt Connectors

    Electrical Metallic Tubing Emt Elbow

    Electrical plug/receptacle adapter

    Electrical Plugs

    Electrical Receptacles

    Electrical Sleeves

    Electrical Taps

    Electrical Terminals

    Electrical Underground Bus Connector

    Electrodes

    Electronic Connector Caps

    Flex Connectors

    Flexible Braid

    Heavy Duty Connector Hood & Housing

    Heavy Duty Connector Insert & Contact

    Input Output Connector Cover

    Jack for Plug

    Jumper Bar

    Liquid Tight Connectors

    Locking Plug

    Mechanical Connector Lug and Cap

    Mechanical Connectors

    Panel Interface Connector

    Power Distribution Blocks

    Printed Circuit Board Pcb Press Fit Header Connector

    Rj Jack And Module

    Tap Off

    Telecommunication Connector

    Terminal Block Accessories

    Terminal Block Covers

    Terminal Block Markers and Marking Accessories

    Terminal Block Separator

    Terminal Blocks

    Terminal Strips

    Twist On Wire Connector

    Wire Connectors

    Wire Or Cable Compression Connector

    Wire Or Cable Compression Reducer

    Wire Or Cable Compression Splice

    Wire Terminal Connector Kit

    Wire Terminal Disconnect

    Wiring Taps

Showing 2365-2376 of 3,357 results

ABB - Installation Products SAL 1000 NL - Aluminum Compression Lug for Aluminum and Copper Terminations, Wire Range 795 (26/7) ACSR, 1000 kcmil Aluminum. Installing Dies 140H, 301, 342, 724, 1, 1/2. Length 8-31/32 inch. Pad 1-39/64 inch wide x 3-1/8 inch long x 9/16 inch thick. (2) 9/16 inch holes on 1-3/4 inch center. Barrel 5-37/64 inch long. Uses 1/2 inch Bolt. Oxide Inhibitor filled and Brown Capped.
ABB - Installation Products · ABB

SAL 1000 NL


Aluminum Compression Lug for Aluminum and Copper Terminations, Wire Range 795 (26/7) ACSR, 1000 kcmil Aluminum. Installing Dies 140H, 301, 342, 724, 1, 1/2. Length 8-31/32 inch. Pad 1-39/64 inch wide x 3-1/8 inch long x 9/16 inch thick. (2) 9/16 inch holes on 1-3/4 inch center. Barrel 5-37/64 inch long. Uses 1/2 inch Bolt. Oxide Inhibitor filled and Brown Capped.

Contact for Pricing

Minimum Qty: 440

Multiplier: 440

*Contact for lower quantities*

ABB - Installation Products SAL 1000 NTN - Tin Plated Aluminum Compression Lug for Aluminum and Copper Terminations, Wire Range 795 (26/7), 900 (54/7), 954 (45/7) ACSR, 1000-1033 kcmil Aluminum. Installing Dies 140H, 301, 342, 724, 1, 1/2. Length 8-9/16 inch. Pad 1-3/4 inch wide x 3-5/8 inch long x 9/16 inch thick. (2) 9/16 inch holes on 1-3/4 inch center. Barrel 3-23/32 inch long. Uses 1/2 inch Bolt. Oxide Inhibitor filled and Brown Capped.
ABB - Installation Products · ABB

SAL 1000 NTN


Tin Plated Aluminum Compression Lug for Aluminum and Copper Terminations, Wire Range 795 (26/7), 900 (54/7), 954 (45/7) ACSR, 1000-1033 kcmil Aluminum. Installing Dies 140H, 301, 342, 724, 1, 1/2. Length 8-9/16 inch. Pad 1-3/4 inch wide x 3-5/8 inch long x 9/16 inch thick. (2) 9/16 inch holes on 1-3/4 inch center. Barrel 3-23/32 inch long. Uses 1/2 inch Bolt. Oxide Inhibitor filled and Brown Capped.

Contact for Pricing

Minimum Qty: 40

Multiplier: 40

*Contact for lower quantities*

ABB - Installation Products SAL 500 NTN - Tin-Plated Aluminum Compression Lug for Aluminum and Copper Terminations, Two-Hole NEMA Pad, Wire Range 500 kcmil Stranded AL-CU, 477 (18/1) ACSR. Installing dies 140H, 301, 342, 724, 1 1/2, 39ART. Length 8-9/16 inch. Pad 1-19/32 inch wide x 3-21/32 inch long x 9/16 inch thick, (2) 9/16 inch diameter holes on 1-3/4 inch center, uses 1/2 inch Bolt. Barrel 3-19/32 inch. Oxide Inhibitor. Pink Cap.
ABB - Installation Products · ABB

SAL 500 NTN


Tin-Plated Aluminum Compression Lug for Aluminum and Copper Terminations, Two-Hole NEMA Pad, Wire Range 500 kcmil Stranded AL-CU, 477 (18/1) ACSR. Installing dies 140H, 301, 342, 724, 1 1/2, 39ART. Length 8-9/16 inch. Pad 1-19/32 inch wide x 3-21/32 inch long x 9/16 inch thick, (2) 9/16 inch diameter holes on 1-3/4 inch center, uses 1/2 inch Bolt. Barrel 3-19/32 inch. Oxide Inhibitor. Pink Cap.

Contact for Pricing

Minimum Qty: 125

Multiplier: 125

*Contact for lower quantities*

ABB - Installation Products SAL 600 N 90 - Aluminum Compression Lug with 90 Degree Bend for Aluminum and Copper Terminations, Two-Hole NEMA Pad, Wire Range 600 kcmil Stranded AL-CU. Installing dies 140H, 301, 342, 724, 1 1/2, 39ART. Length 8-47/64 inch before bending. Pad 1-19/32 inch wide x 3 inch long x 9/16 inch thick, (2) 9/16 inch diameter holes on 1-3/4 inch center, uses 1/2 inch Bolt. Barrel 3-23/32 inch. Oxide Inhibitor. Black Cap.
ABB - Installation Products · ABB

SAL 600 N 90


Aluminum Compression Lug with 90 Degree Bend for Aluminum and Copper Terminations, Two-Hole NEMA Pad, Wire Range 600 kcmil Stranded AL-CU. Installing dies 140H, 301, 342, 724, 1 1/2, 39ART. Length 8-47/64 inch before bending. Pad 1-19/32 inch wide x 3 inch long x 9/16 inch thick, (2) 9/16 inch diameter holes on 1-3/4 inch center, uses 1/2 inch Bolt. Barrel 3-23/32 inch. Oxide Inhibitor. Black Cap.

Contact for Pricing

ABB - Installation Products SAL 600 N - Aluminum Compression Lug for Aluminum and Copper Terminations, Two-Hole NEMA Pad, Wire Range 600 kcmil Stranded AL-CU. Installing dies 140H, 301, 342, 724, 1 1/2, 39ART. Length 8-9/16 inch. Pad 1-19/32 inch wide x 3-21/32 inch long x 9/16 inch thick, (2) 9/16 inch diameter holes on 1-3/4 inch center, uses 1/2 inch Bolt. Barrel 3-19/32 inch. Oxide Inhibitor. Black Cap.
ABB - Installation Products · ABB

SAL 600 N


Aluminum Compression Lug for Aluminum and Copper Terminations, Two-Hole NEMA Pad, Wire Range 600 kcmil Stranded AL-CU. Installing dies 140H, 301, 342, 724, 1 1/2, 39ART. Length 8-9/16 inch. Pad 1-19/32 inch wide x 3-21/32 inch long x 9/16 inch thick, (2) 9/16 inch diameter holes on 1-3/4 inch center, uses 1/2 inch Bolt. Barrel 3-19/32 inch. Oxide Inhibitor. Black Cap.

Contact for Pricing

Minimum Qty: 200

Multiplier: 200

*Contact for lower quantities*

ABB - Installation Products SAL 636-4 N - Aluminum Compression Lug for Aluminum and Copper Terminations, Four-Hole NEMA Pad, Wire Range 556.5(24/7, 26/7) and 636(18/1) ACSR, 600-636-650 kcmil Stranded AL-CU. Installing dies 140H, 301, 342, 724, 1 1/2, 39ART. Length 8-9/16 inch. Pad 1-19/32 inch wide x 3-21/32 inch long x 9/16 inch thick, (2) 9/16 inch diameter holes on 1-3/4 inch center, uses 1/2 inch Bolt. Barrel 3-19/32 inch. Oxide Inhibitor. Purple Cap.
ABB - Installation Products · ABB

SAL 636-4 N


Aluminum Compression Lug for Aluminum and Copper Terminations, Four-Hole NEMA Pad, Wire Range 556.5(24/7, 26/7) and 636(18/1) ACSR, 600-636-650 kcmil Stranded AL-CU. Installing dies 140H, 301, 342, 724, 1 1/2, 39ART. Length 8-9/16 inch. Pad 1-19/32 inch wide x 3-21/32 inch long x 9/16 inch thick, (2) 9/16 inch diameter holes on 1-3/4 inch center, uses 1/2 inch Bolt. Barrel 3-19/32 inch. Oxide Inhibitor. Purple Cap.

Contact for Pricing

Minimum Qty: 50

Multiplier: 50

*Contact for lower quantities*

ABB - Installation Products SAL 650 N - Aluminum Compression Lug for Aluminum and Copper Terminations, Two-Hole NEMA Pad, Wire Range 556.5(24/7, 26/7) ACSR, 600-363-650 kcmil Stranded AL-CU, 556.5 AAC, 750 Compact. Installing dies 140H, 301, 342, 724, 1 1/2, 39ART. Length 8-9/16 inch. Pad 1-19/32 inch wide x 3-21/32 inch long x 9/16 inch thick, (2) 9/16 inch diameter holes on 1-3/4 inch center, uses 1/2 inch Bolt. Barrel 3-19/32 inch. Oxide Inhibitor. Clear Cap.
ABB - Installation Products · ABB

SAL 650 N


Aluminum Compression Lug for Aluminum and Copper Terminations, Two-Hole NEMA Pad, Wire Range 556.5(24/7, 26/7) ACSR, 600-363-650 kcmil Stranded AL-CU, 556.5 AAC, 750 Compact. Installing dies 140H, 301, 342, 724, 1 1/2, 39ART. Length 8-9/16 inch. Pad 1-19/32 inch wide x 3-21/32 inch long x 9/16 inch thick, (2) 9/16 inch diameter holes on 1-3/4 inch center, uses 1/2 inch Bolt. Barrel 3-19/32 inch. Oxide Inhibitor. Clear Cap.

Contact for Pricing

ABB - Installation Products SAL 636 N - Aluminum Compression Lug for Aluminum and Copper Terminations, Two-Hole NEMA Pad, Wire Range 556.5(24/7, 26/7) and 636(18/1) ACSR, 600-636-650 kcmil AL-CU. Installing dies 140H, 301, 1 1/2. Length 7-5/8 inch. Pad 3 inch wide x 3-1/8 inch long x 1/5 inch thick, (4) 9/16 inch diameter holes on 1-3/4 inch centers, uses 1/2 inch Bolt. Barrel 3-5/8 inch. Oxide Inhibitor. Purple Cap.
ABB - Installation Products · ABB

SAL 636 N


Aluminum Compression Lug for Aluminum and Copper Terminations, Two-Hole NEMA Pad, Wire Range 556.5(24/7, 26/7) and 636(18/1) ACSR, 600-636-650 kcmil AL-CU. Installing dies 140H, 301, 1 1/2. Length 7-5/8 inch. Pad 3 inch wide x 3-1/8 inch long x 1/5 inch thick, (4) 9/16 inch diameter holes on 1-3/4 inch centers, uses 1/2 inch Bolt. Barrel 3-5/8 inch. Oxide Inhibitor. Purple Cap.

Contact for Pricing

ABB - Installation Products SAL 500 N - Aluminum Compression Lug for Aluminum and Copper Terminations, Two-Hole NEMA Pad, Wire Range 500 kcmil Stranded AL-CU, 477 (18/1) ACSR. Installing dies 140H, 301, 342, 724, 1 1/2, 39ART. Length 8-9/16 inch. Pad 1-19/32 inch wide x 3-21/32 inch long x 9/16 inch thick, (2) 9/16 inch diameter holes on 1-3/4 inch center, uses 1/2 inch Bolt. Barrel 3-19/32 inch. Oxide Inhibitor. Pink Cap.
ABB - Installation Products · ABB

SAL 500 N


Aluminum Compression Lug for Aluminum and Copper Terminations, Two-Hole NEMA Pad, Wire Range 500 kcmil Stranded AL-CU, 477 (18/1) ACSR. Installing dies 140H, 301, 342, 724, 1 1/2, 39ART. Length 8-9/16 inch. Pad 1-19/32 inch wide x 3-21/32 inch long x 9/16 inch thick, (2) 9/16 inch diameter holes on 1-3/4 inch center, uses 1/2 inch Bolt. Barrel 3-19/32 inch. Oxide Inhibitor. Pink Cap.

Contact for Pricing

ABB - Installation Products SAL 1000-4 NTN - Tin-Plated Aluminum Four-Hole NEMA Lugs - common die series, Compact 1000 kcmil AL, ACSR 795 (30/19) and 874 (54/7), installing dies 140H, 301, 342, 724. Length 8-3/4 inch. Pad 3 inch wide x 3-1/2 inch long x 1/2 inch thick, (4) 9/16 diameter holes on 1-3/4 inch centers. Barrel 4-7/16 inch. Oxide Inhibitor, Brown Cap.
ABB - Installation Products · ABB

SAL 1000-4 NTN


Tin-Plated Aluminum Four-Hole NEMA Lugs - common die series, Compact 1000 kcmil AL, ACSR 795 (30/19) and 874 (54/7), installing dies 140H, 301, 342, 724. Length 8-3/4 inch. Pad 3 inch wide x 3-1/2 inch long x 1/2 inch thick, (4) 9/16 diameter holes on 1-3/4 inch centers. Barrel 4-7/16 inch. Oxide Inhibitor, Brown Cap.

Contact for Pricing

Minimum Qty: 40

Multiplier: 40

*Contact for lower quantities*

ABB - Installation Products SAL 650 NTN - Tin-Plated Aluminum Compression Lug for Aluminum and Copper Terminations, Two-Hole NEMA Pad, Wire Range 556.5(24/7, 26/7) ACSR, 600-363-650 kcmil Stranded AL-CU, 556.5 AAC, 750 Compact. Installing dies 140H, 301, 342, 724, 1 1/2, 39ART. Length 8-9/16 inch. Pad 1-19/32 inch wide x 3-21/32 inch long x 9/16 inch thick, (2) 9/16 inch diameter holes on 1-3/4 inch center, uses 1/2 inch Bolt. Barrel 3-19/32 inch. Oxide Inhibitor. Clear Cap.
ABB - Installation Products · ABB

SAL 650 NTN


Tin-Plated Aluminum Compression Lug for Aluminum and Copper Terminations, Two-Hole NEMA Pad, Wire Range 556.5(24/7, 26/7) ACSR, 600-363-650 kcmil Stranded AL-CU, 556.5 AAC, 750 Compact. Installing dies 140H, 301, 342, 724, 1 1/2, 39ART. Length 8-9/16 inch. Pad 1-19/32 inch wide x 3-21/32 inch long x 9/16 inch thick, (2) 9/16 inch diameter holes on 1-3/4 inch center, uses 1/2 inch Bolt. Barrel 3-19/32 inch. Oxide Inhibitor. Clear Cap.

Contact for Pricing

Minimum Qty: 100

Multiplier: 100

*Contact for lower quantities*

ABB - Installation Products SAL 750 N - Aluminum Compression Lug for Aluminum and Copper Terminations, Two-Hole NEMA Pad, Wire Range 700-750 kcmil AL-CU, 636 (26/7, 24/7) ACSR. Installing dies 140H, 301, 342, 1 1/2. Length 7-7/8 inch. Pad 1-3/4 inch wide x 3-1/16 inch long x 37/64 inch thick, (2) 9/16 inch diameter holes on 1-3/4 inch center, uses 1/2 inch Bolt. Barrel 3-13/16 inch. Oxide Inhibitor. Yellow Cap.
ABB - Installation Products · ABB

SAL 750 N


Aluminum Compression Lug for Aluminum and Copper Terminations, Two-Hole NEMA Pad, Wire Range 700-750 kcmil AL-CU, 636 (26/7, 24/7) ACSR. Installing dies 140H, 301, 342, 1 1/2. Length 7-7/8 inch. Pad 1-3/4 inch wide x 3-1/16 inch long x 37/64 inch thick, (2) 9/16 inch diameter holes on 1-3/4 inch center, uses 1/2 inch Bolt. Barrel 3-13/16 inch. Oxide Inhibitor. Yellow Cap.

Contact for Pricing

Minimum Qty: 25

Multiplier: 25

*Contact for lower quantities*

Showing 2365-2376 of 3,357 results