All Categories

Electrical Systems and Lighting and Components and Accessories and Supplies

Electrical Equipment, Components, and Supplies

Electrical Lugs Plugs And Connectors

Subcategories

    Automatic Wire Or Cable Connector

    Backshell connectors

    Battery Terminal

    Cable Gland Connector

    Cable Joint

    Cable Or Wire Lug

    Circular Connectors

    Coaxial Connectors

    Connecting Leads or Wires

    Connector And Cable Seal

    Crab Joint

    Electrical Connector Assembly

    Electrical Extension Cable

    Electrical Metallic Tubing Emt Connectors

    Electrical Metallic Tubing Emt Elbow

    Electrical plug/receptacle adapter

    Electrical Plugs

    Electrical Receptacles

    Electrical Sleeves

    Electrical Taps

    Electrical Terminals

    Electrical Underground Bus Connector

    Electrodes

    Electronic Connector Caps

    Flex Connectors

    Flexible Braid

    Heavy Duty Connector Hood & Housing

    Heavy Duty Connector Insert & Contact

    Input Output Connector Cover

    Jack for Plug

    Jumper Bar

    Liquid Tight Connectors

    Locking Plug

    Mechanical Connector Lug and Cap

    Mechanical Connectors

    Panel Interface Connector

    Power Distribution Blocks

    Printed Circuit Board Pcb Press Fit Header Connector

    Rj Jack And Module

    Tap Off

    Telecommunication Connector

    Terminal Block Accessories

    Terminal Block Covers

    Terminal Block Markers and Marking Accessories

    Terminal Block Separator

    Terminal Blocks

    Terminal Strips

    Twist On Wire Connector

    Wire Connectors

    Wire Or Cable Compression Connector

    Wire Or Cable Compression Reducer

    Wire Or Cable Compression Splice

    Wire Terminal Connector Kit

    Wire Terminal Disconnect

    Wiring Taps

Showing 1297-1308 of 3,357 results

ABB - Installation Products M2D1614M-1 - KUBE Male (Two Load) Copper Motor Pigtail Disconnect, Wire Size 16-14 AWG, Body Size 1, Die Color Blue
ABB - Installation Products · Color-Keyed

M2D1614M-1


KUBE Male (Two Load) Copper Motor Pigtail Disconnect, Wire Size 16-14 AWG, Body Size 1, Die Color Blue

Contact for Pricing

Minimum Qty: 20

Multiplier: 20

*Contact for lower quantities*

NSI Industries MWNWR1810 - Wing Wire Connector, Screw On, Red, 16-12 AWG wire size, 3#16 AWG minimum wire combination, 5#12 AWG maximum wire combination, 100 per pack
NSI Industries · Metallics

MWNWR1810

39427


Wing Wire Connector, Screw On, Red, 16-12 AWG wire size, 3#16 AWG minimum wire combination, 5#12 AWG maximum wire combination, 100 per pack

Contact for Pricing

Minimum Qty: 100

Multiplier: 100

*Contact for lower quantities*

NSI Industries MWTK1 - Wire Terminal Kit, 11 x 6.5 in. size, Plastic case material, 241 piece, Yellow, Red, Blue, Vinyl insulation, Kit Contains: (1) Wire Terminal Crimper 22-10 ga, (20) #22-#18 Butt Connector, (20) #16-#14 Butt Connector, (20) #12-#10 Butt Connector, (10) #12-#10 Ring Connector #8 Stud, (10) #12-#10 Ring Connector #10 Stud, (10) #12-#10 Ring Connector 5/16 Stud, (10) #12-#10 Ring Connector 3/8 Stud, (10) #16-#14 Ring Connector #6 Stud, (10) #16-#14 Ring Connector #10 Stud, (10) #22-#18 Ring Connector #6 Stud, (10) #22-#18 Ring Connector #10 Stud, (10) #12-#10 Spade Connector #6 Stud, (10) #12-#10 Spade Connector #10 Stud, (10) #16-#14 Spade Connector #6 Stud, (10) #16-#14 Spade Connector #10 Stud, (10) #22-#18 Spade Connector #6 Stud, (10) #22-#18 Spade Connector #10 Stud, (10) #16-#14 250QDC Male, (10) #16-#14 250QDC Female, (10) #22-#18 250QDC Male, (10) #22-#18 250QDC Female
NSI Industries · Metallics

MWTK1

39450


Wire Terminal Kit, 11 x 6.5 in. size, Plastic case material, 241 piece, Yellow, Red, Blue, Vinyl insulation, Kit Contains: (1) Wire Terminal Crimper 22-10 ga, (20) #22-#18 Butt Connector, (20) #16-#14 Butt Connector, (20) #12-#10 Butt Connector, (10) #12-#10 Ring Connector #8 Stud, (10) #12-#10 Ring Connector #10 Stud, (10) #12-#10 Ring Connector 5/16 Stud, (10) #12-#10 Ring Connector 3/8 Stud, (10) #16-#14 Ring Connector #6 Stud, (10) #16-#14 Ring Connector #10 Stud, (10) #22-#18 Ring Connector #6 Stud, (10) #22-#18 Ring Connector #10 Stud, (10) #12-#10 Spade Connector #6 Stud, (10) #12-#10 Spade Connector #10 Stud, (10) #16-#14 Spade Connector #6 Stud, (10) #16-#14 Spade Connector #10 Stud, (10) #22-#18 Spade Connector #6 Stud, (10) #22-#18 Spade Connector #10 Stud, (10) #16-#14 250QDC Male, (10) #16-#14 250QDC Female, (10) #22-#18 250QDC Male, (10) #22-#18 250QDC Female

Contact for Pricing

NSI Industries MWNB2214 - Wire Connector, Screw On, Blue, 22-14 AWG wire size, 3#22 AWG minimum wire combination, 3#16+1#18 AWG maximum wire combination, 100 per pack
NSI Industries · Metallics

MWNB2214

39409


Wire Connector, Screw On, Blue, 22-14 AWG wire size, 3#22 AWG minimum wire combination, 3#16+1#18 AWG maximum wire combination, 100 per pack

Contact for Pricing

Minimum Qty: 100

Multiplier: 100

*Contact for lower quantities*

NSI Industries WWC-R-C - The Easy-Twist WWC-R-C 100-Count Carton of Red Winged Wire Connectors are designed for use on copper wires in the 22-6 AWG size range. They’re made of flame-retardant thermoplastic rated for a maximum temperature of 105˚ Celsius (221˚ Fahrenheit). The quick-grip square spring design grips in fewer twists and can dead-end a single wire, while the ergonomic swept-back wing design and ribbed texture makes them easy to twist. Their compact design is useful for applications in tight areas or anywhere else you need to connect wires.
NSI Industries · Easy-Twist

WWC-R-C


The Easy-Twist WWC-R-C 100-Count Carton of Red Winged Wire Connectors are designed for use on copper wires in the 22-6 AWG size range. They’re made of flame-retardant thermoplastic rated for a maximum temperature of 105˚ Celsius (221˚ Fahrenheit). The quick-grip square spring design grips in fewer twists and can dead-end a single wire, while the ergonomic swept-back wing design and ribbed texture makes them easy to twist. Their compact design is useful for applications in tight areas or anywhere else you need to connect wires.

Contact for Pricing

Minimum Qty: 100

Multiplier: 100

*Contact for lower quantities*

NSI Industries IPL350-3C - The Polaris IPL350-3C Multi-Tap Single Side Entry Vision Tap Connector features 3 ports sized for 350 MCM - 6 AWG wires. The clear body allows users to see their conductor placement and is wrapped in a layer of plastisol insulation. Each port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.
NSI Industries · Polaris · Polaris Vision Tap

IPL350-3C


The Polaris IPL350-3C Multi-Tap Single Side Entry Vision Tap Connector features 3 ports sized for 350 MCM - 6 AWG wires. The clear body allows users to see their conductor placement and is wrapped in a layer of plastisol insulation. Each port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.

Contact for Pricing

Minimum Qty: 4

Multiplier: 4

*Contact for lower quantities*

NSI Industries IT-750C - The Polaris IT-750C Multi-Tap Dual-Side Entry Connector features 2 ports sized for 750 to 250 MCM wires. The clear body allows users to see their conductor placement and is wrapped in a layer of plastisol insulation. Each port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Dual rated for use with copper or aluminum cables. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.
NSI Industries · Polaris · Polaris Vision Tap

IT-750C


The Polaris IT-750C Multi-Tap Dual-Side Entry Connector features 2 ports sized for 750 to 250 MCM wires. The clear body allows users to see their conductor placement and is wrapped in a layer of plastisol insulation. Each port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Dual rated for use with copper or aluminum cables. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.

Contact for Pricing

Minimum Qty: 4

Multiplier: 4

*Contact for lower quantities*

NSI Industries IPL4-5C - The Polaris IPL4-5C Multi-Tap Single Side Entry Vision Tap Connector features 5 ports sized for 4-14 AWG wires. The clear body allows users to see their conductor placement and is wrapped in a layer of plastisol insulation. Each port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.
NSI Industries · Polaris · Polaris Vision Tap

IPL4-5C


The Polaris IPL4-5C Multi-Tap Single Side Entry Vision Tap Connector features 5 ports sized for 4-14 AWG wires. The clear body allows users to see their conductor placement and is wrapped in a layer of plastisol insulation. Each port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.

Contact for Pricing

Minimum Qty: 6

Multiplier: 6

*Contact for lower quantities*

NSI Industries IT-500C - The Polaris IT-500C Multi-Tap Dual-Side Entry Vision Tap Connector features 2 ports sized for 500 MCM to 4 AWG wires. The clear body allows users to see their conductor placement and is wrapped in a layer of plastisol insulation. Each port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Dual rated for use with copper or aluminum cables. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.
NSI Industries · Polaris · Polaris Vision Tap

IT-500C


The Polaris IT-500C Multi-Tap Dual-Side Entry Vision Tap Connector features 2 ports sized for 500 MCM to 4 AWG wires. The clear body allows users to see their conductor placement and is wrapped in a layer of plastisol insulation. Each port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Dual rated for use with copper or aluminum cables. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.

Contact for Pricing

Minimum Qty: 4

Multiplier: 4

*Contact for lower quantities*

NSI Industries IPLD600-8C - The Polaris IPLD600-8C Multi-Tap Dual-Sided Entry Vision Tap Connector features 8 ports sized for 600 MCM - 6 AWG wires. The clear body allows users to see their conductor placement and is wrapped in a layer of plastisol insulation. Each dual-sided port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.
NSI Industries · Polaris · Polaris Vision Tap

IPLD600-8C


The Polaris IPLD600-8C Multi-Tap Dual-Sided Entry Vision Tap Connector features 8 ports sized for 600 MCM - 6 AWG wires. The clear body allows users to see their conductor placement and is wrapped in a layer of plastisol insulation. Each dual-sided port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.

Contact for Pricing

NSI Industries IPLD350-4CB - The Polaris IPLD350-4CB Multi-Tap Dual-Sided Entry Vision Tap Connector features 4 ports sized for 350 MCM - 6 AWG wires. The clear body allows users to see their conductor placement and is wrapped in a layer of plastisol insulation. Each dual-sided port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies, and comes packaged in a clear plastic bag with a mounting hole for hanging in retail displays. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.
NSI Industries · Polaris · Polaris Vision Tap

IPLD350-4CB


The Polaris IPLD350-4CB Multi-Tap Dual-Sided Entry Vision Tap Connector features 4 ports sized for 350 MCM - 6 AWG wires. The clear body allows users to see their conductor placement and is wrapped in a layer of plastisol insulation. Each dual-sided port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies, and comes packaged in a clear plastic bag with a mounting hole for hanging in retail displays. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.

Contact for Pricing

NSI Industries IT-750CB - The Polaris IT-750CB Multi-Tap Dual-Side Entry Connector features 2 ports sized for 750 to 250 MCM wires. The clear body allows users to see their conductor placement and is wrapped in a layer of plastisol insulation. Each port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Dual rated for use with copper or aluminum cables. Installs with a hex key and torque wrench, without any tape or additional supplies, and comes packaged in a clear plastic bag with a mounting hole for hanging in retail displays. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.
NSI Industries · Polaris · Polaris Vision Tap

IT-750CB


The Polaris IT-750CB Multi-Tap Dual-Side Entry Connector features 2 ports sized for 750 to 250 MCM wires. The clear body allows users to see their conductor placement and is wrapped in a layer of plastisol insulation. Each port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Dual rated for use with copper or aluminum cables. Installs with a hex key and torque wrench, without any tape or additional supplies, and comes packaged in a clear plastic bag with a mounting hole for hanging in retail displays. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.

Contact for Pricing

Showing 1297-1308 of 3,357 results