Fender washer with a 1/2 in inside diameter and 2 in outside diameter. It is made of steel with a zinc plated finish. The washer has a thickness range of 0.047 in to 0.080 in and is used where an extra wide bearing surface is required.

Split lock washer for use where greater bolt tension per unit of applied torque is needed. It resists loosening caused by vibration and corrosion and provides a hardened bearing surface for more uniform torque control and load distribution. The washer is made of silicon bronze and is bronze in color.

Split lock washer made of silicon bronze. It has a medium thickness and is intended to apply greater bolt tension per unit of applied torque, helping resist loosening caused by vibration and corrosion. The washer provides a hardened bearing surface for more uniform torque control and load distribution.

5/16 in. split lock washers in a jar. Made of stainless steel with a stainless finish and silver color. The washer has a thickness of 0.078 in., an outside diameter of 0.583 in., and an inside diameter of 0.322 in. It is intended to apply greater bolt tension per unit of applied torque and resist loosening caused by vibration and corrosion.

Split lock washers for #10 fasteners. They are made of silicon bronze with a bronze color and medium thickness. The washer has an inside diameter of 0.200 in and an outside diameter of 0.334 in.

A flat washer made of steel with a zinc plated finish. It fits 1/4 in bolt sizes and has an inside diameter of 0.312 in, an outside diameter of 0.750 in, and a thickness of 1/16 in. The washer is silver in color.

Flat cut washers designed to improve stress distribution and span large clearance holes. They are used around a bolt or screw, between the bearing surface of the fastener and the part to which it is attached. This sheet lists them as silicon bronze with a bronze finish and a copper color.

Flat cut washer for use around a bolt or screw, between the fastener bearing surface and the part it is attached to. Made of steel with a hot dipped galvanized finish. It has a thickness of 0.080", an outside diameter of 0.827", and an inside diameter of 0.419". Fits 3/8" bolt sizes and is silver in color.

This is a fender washer made of 18-8 stainless steel with a plain finish. It has an inside diameter of 0.531 in and an outside diameter of 2.000 in. The washer is used where a larger bearing surface is needed.

Belleville washers for 3/8" bolt sizes. They are made of spring steel with a zinc plated finish. The washer has an inside diameter of 0.386" and an outside diameter of 1.063". Thickness is 0.082".

Bonded sealing washer for use where water needs to be kept from seeping into the fastener or fastener hole. It is made of steel with a galvanized finish and has an EPDM seal material. The washer is silver in color and has an outside diameter of 0.980" and an inside diameter of 0.918".

Belleville washers for 5/16" bolt sizes. Made of spring steel with a zinc plated finish. The washer has an inside diameter of 0.322" and an outside diameter of 1.063". Thickness is 0.082".